Become a Patron!

I want to see everyone's wood....... (Stabwood, wood, mixed ) Regulated, Mechanical, Wood look alike

MannyScoot

Diamond Contributor
Member For 4 Years
That is very nice. The battery cap is the shiznit. I gotta be honest though I would still take your first Natakari LOL. That is just me though. I am in love with that thing. This one is great in it's own right. You own most of the best Mods in the world. Why not go out with a bang? Get a Top Hat, like 20 Grand now! Manny if you got that I would literally kiss your ass if I met you! Still, you have some hella shit there. Can you believe I know those words HAHA. I like Rap music! I do not listen to the oldies. Fuck I am not in a nursing home. Yet.

I just wanted to say good Mods deserve good batteries. Last thing you want is a vent in one of these barring the fact you get hurt bad.
Good batteries are names you know. Manufacturers. All others are second quality "re-wraps".
So you have the likes of LG, Samsung, Sony ETC. The Ijoy is a re-wrap of something but even Mooch does not know what. We both know Ijoy does not make batteries! The difference between Ijoy and 40T runtime is like 3-1/2. It is equal to VRK 26650. Which is also a re-wrap of something. There is no reason to re-wrap first quality batteries. All they do is make someone more money. Batteries should be $8-$10 a piece. More, you are getting robbed. Vapcell is a good point. It is a re-wrap for $20+. What a waste of money then. People think it is "special" for vaping, hence the name. No it is not. It is junk per Mooch. Mooch does a great job for us.

VA does not have a metal battery compartment reinforcement tube. That is fine. Stabwood is stronger than that thin tube anyhow! Plus you get to see it is real solid wood. Some very cheap shit is wood/resin over cheap plastic. They make sure you know this is not the case. As with almost all custom Mods.

I have to go buy the other Damn Crown tank or that guy is likely to never speak to me again. He is a good source for accessories to me.

I am just sticking with VA and Asmodus. Since I got screwed by JM. He soured the fun for me. I probably will not buy another Mod this year anyways.

Manny, the reason they have not made a 26650 is because they have gone "out of style". The batteries will be around for years though I imagine. So yours is truly unique. I prefer 26650 too. Packs a lot more of a wallop. 100W does need a 40A battery. 75W the batteries are slightly too low in 21700. 75W is about 25A. Most of the batteries are 20-23A. re-wrap and you do not even know what you are getting. Did not pass QC. risk your life and $700+ Mod?
Used it all day today.....
1a75df9454e45d369c9aeebbac6bc2c5.jpg
31d3a299923f374248da24347693caf4.jpg
606e971ce673943a3192d27334cdb9cd.jpg
fe55d061227a28d3b5c8e41bd95552b1.jpg
c87dbe40353b45e02d569bd771a30170.jpg
ac9e17656683414bd8752122944727d3.jpg


Sent from my Pixel 2 XL using Tapatalk
 

Roman_RO

Bronze Contributor
I use mine in single coil mode and WOW! You will not be disappointed, the air adjustment thingamajigs shoot the air dead nuts at the coil/coils. It's almost impossible to over squonk that tank as well, if that's something you might use it atop of
I wish Tony B would make a 25mm version. I can't wait to get mine, it should be here tomorrow along with 100' of kanthal a1 and 100' of NI80. Tony B done a fantastic job creating the V2 RDA I like what he done with the air flow and the overall looks of the RDA is nice I like the fact that you don't have to be afraid to push that squonk bottle no over flow...persay.
It took me 3 days of shopping to finally pick the RDA I wanted. I already have 3 iv got the wotofo mesh profile and the wotofo warrior and the pulse x bf RDA.
 

Roman_RO

Bronze Contributor
I use mine in single coil mode and WOW! You will not be disappointed, the air adjustment thingamajigs shoot the air dead nuts at the coil/coils. It's almost impossible to over squonk that tank as well, if that's something you might use it atop of
Are ya using the v2 on the pulse x? I'll be using mine on the pulse x. Probably gonna make me some fused Clapton's around .5
ohms for single coil build. Right now I'm using my profile with the OFRF Nexmesh @45 what's .13ohms and the flavor is so good, vapping puckerface apple jolly rancher.
 

MannyScoot

Diamond Contributor
Member For 4 Years
Are ya using the v2 on the pulse x? I'll be using mine on the pulse x. Probably gonna make me some fused Clapton's around .5
ohms for single coil build. Right now I'm using my profile with the OFRF Nexmesh @45 what's .13ohms and the flavor is so good, vapping puckerface apple jolly rancher.
Post a picture on top of a nice Woody...... I want to see the V2.....

Sent from my Pixel 2 XL using Tapatalk
 

Bluenatic

Bronze Contributor
Member For 4 Years
VU Patreon
Are ya using the v2 on the pulse x? I'll be using mine on the pulse x. Probably gonna make me some fused Clapton's around .5
ohms for single coil build. Right now I'm using my profile with the OFRF Nexmesh @45 what's .13ohms and the flavor is so good, vapping puckerface apple jolly rancher.
Using mine on a Desire Cut for the most part, Asmodus Luna, and sometimes on my Pulse dual. As long as your mod dumps juice all over your coil/coils you be in flavor heaven. Congrats on your new tank! Anyways, back to wood!!!!
 

MannyScoot

Diamond Contributor
Member For 4 Years
Using mine on a Desire Cut for the most part, Asmodus Luna, and sometimes on my Pulse dual. As long as your mod dumps juice all over your coil/coils you be in flavor heaven. Congrats on your new tank! Anyways, back to wood!!!!
You guys can talk about anything on this thread..... This thread rocks...... We have interesting folks here ........

They love wood, Rta's RDA's, as long as it's sweet and bad ass..... Ha
 
Last edited:

Bluenatic

Bronze Contributor
Member For 4 Years
VU Patreon
You guys can talk about anything on this thread..... This thread rocks...... We have interesting folks here ........

Sent from my Pixel 2 XL using Tapatalk
Thanks Manny. You have some fucking beautiful mods. I've always appreciated your passion about the stabwoods. Matter of fact, that's how I learned about and then purchased my Luna. Which I really, really like. Asmodus does make a great mod. I'll own an Amighty in the future (not a woody but a looker imo). Looking forward to seeing your new Mosiac you are pumped about
 

MannyScoot

Diamond Contributor
Member For 4 Years
Thanks Manny. You have some fucking beautiful mods. I've always appreciated your passion about the stabwoods. Matter of fact, that's how I learned about and then purchased my Luna. Which I really, really like. Asmodus does make a great mod. I'll own an Amighty in the future (not a woody but a looker imo). Looking forward to seeing your new Mosiac you are pumped about
Yeah these guys are like .... Well I'm taking your mod home tonight and vaping it in power mode and temp control...... All night and tomorrow....

Then a quick Polishing and maybe pack her to ship next week..... We only drive into town once a week.....

I was like yeah, but now I'm buying a used mod ? And you guys take forever making a mod.......

The guy says sometimes we go fishing too.....

I gave up.......






Sent from my Pixel 2 XL using Tapatalk
 

Roman_RO

Bronze Contributor
Using mine on a Desire Cut for the most part, Asmodus Luna, and sometimes on my Pulse dual. As long as your mod dumps juice all over your coil/coils you be in flavor heaven. Congrats on your new tank! Anyways, back to wood!!!!
I need another squonk. I'm thinking about the pulse dual....Thanks, iv been eyeing the tracking lol. Believe I'm gonna have to up my nic to 6mg, 3mg is not giving me that kick.
 

MannyScoot

Diamond Contributor
Member For 4 Years
I need another squonk. I'm thinking about the pulse dual....Thanks, iv been eyeing the tracking lol. Believe I'm gonna have to up my nic to 6mg, 3mg is not giving me that kick.
Yeah I started with 3mg and leveled good at 18mg....

Sent from my Pixel 2 XL using Tapatalk
 

mjag

Gold Contributor
Member For 4 Years
Not a huge selection of stabs but I am always on the lookout for more.

First 2 are custom PWM mods by Whiterose mods, big one has a Lipo.

Then a few Asmodus stabs, still on the lookout for a Minikin V2 Kodama in the right color, wish Manny would sell me his...Haha

Then my SL, Lucifer and Fossil Matrix stabs.

Just found this thread so gonna check it out more to polish up some of these
c513a53471832b179c498c92a90dd106.jpg
869f6782f6747f6e146b9aa4ff6eafd4.jpg
bed656145196879957b0492bd5d4f0c9.jpg


Sent from my SM-N960U using Tapatalk
 

MannyScoot

Diamond Contributor
Member For 4 Years
Not a huge selection of stabs but I am always on the lookout for more.

First 2 are custom PWM mods by Whiterose mods, big one has a Lipo.

Then a few Asmodus stabs, still on the lookout for a Minikin V2 Kodama in the right color, wish Manny would sell me his...Haha

Then my SL, Lucifer and Fossil Matrix stabs.

Just found this thread so gonna check it out more to polish up some of these
c513a53471832b179c498c92a90dd106.jpg
869f6782f6747f6e146b9aa4ff6eafd4.jpg
bed656145196879957b0492bd5d4f0c9.jpg


Sent from my SM-N960U using Tapatalk
You have a nice collection......that small one red-black looks like an Ohni modz.....

I'm having to stop soon...... Between 3D printed, Lipos, stabwoods and others.....

(Stabwoods) I never use them, like sitting around and looking pretty .....ha ha... Use them in the house since I had a Minikin Kodama stolen in a restaurant......

Sent from my Pixel 2 XL using Tapatalk
 

ZombieBob

Member For 4 Years
How much work did you have to put into it? Did you use the micro mesh if so which did you start at. I’m thinking of trying Micro Gloss instead of Renaissance. It’s non petroleum and doesn’t stink to high hell.
Sorry it took a while to get back to you, been working and it kicks my old senior ass hard! I use the polishing pads, 1k grit, to get to the level I want. Then switch to 5k grit to start the polishing. Then I cheat- I bought some full sheets of 10k grit paper, cut it into 4 pieces, and strap it to a quarter sheet palm sander. Only takes about an hour or 2 to make it look like glass. Don’t know if it will work on my new one as (like yours) the metal is coated with some sort of dark material. Don’t want to scratch that off. May do what you did and use painters tape to mask it. I didn’t do the front because I didn’t want to fuck up the touch screen. Yours is looking really good! It is definitely worth the effort!
 

mjag

Gold Contributor
Member For 4 Years
You have a nice collection......that small one red-black looks like an Ohni modz.....

I'm having to stop soon...... Between 3D printed, Lipos, stabwoods and others.....

(Stabwoods) I never use them, like sitting around and looking pretty .....ha ha... Use them in the house since I had a Minikin Kodama stolen in a restaurant......

Sent from my Pixel 2 XL using Tapatalk
Thanks bud and sorry to hear about the stolen mod, that sucks. Yeah, my stabs stay home unless hanging out with friends.

You have a sick collection of mods Manny, much respect!

Sent from my SM-N960U using Tapatalk
 

MannyScoot

Diamond Contributor
Member For 4 Years
Thanks bud and sorry to hear about the stolen mod, that sucks. Yeah, my stabs stay home unless hanging out with friends.

You have a sick collection of mods Manny, much respect!

Sent from my SM-N960U using Tapatalk
Thanks man...your doing good yourself... Very unique mods and all that matters is you enjoy using them (sparingly) and maintaining them....

People have no idea of the required maintenance on a Stabwood mod.....

I spread Lube tube in the threads monthly and wax them after using them....use Q-tips to clean any juice inside the 510....... Just a little love that's all they want......
bc0e5ba8bbddd515d6ddfbcbd8d67255.jpg


The Lube Tube can be used for all kinds of Lube Jobs ..... :)
 
Last edited:

MannyScoot

Diamond Contributor
Member For 4 Years
Sorry it took a while to get back to you, been working and it kicks my old senior ass hard! I use the polishing pads, 1k grit, to get to the level I want. Then switch to 5k grit to start the polishing. Then I cheat- I bought some full sheets of 10k grit paper, cut it into 4 pieces, and strap it to a quarter sheet palm sander. Only takes about an hour or 2 to make it look like glass. Don’t know if it will work on my new one as (like yours) the metal is coated with some sort of dark material. Don’t want to scratch that off. May do what you did and use painters tape to mask it. I didn’t do the front because I didn’t want to fuck up the touch screen. Yours is looking really good! It is definitely worth the effort!
Yeah I need some lower grit..... This micromesh pads start at 1500...... I heard 320 is good starting point.......

Sent from my Pixel 2 XL using Tapatalk
 

GorGon27

Gold Contributor
Member For 4 Years
I only use 3mg but vape all day. I love that one Manny. You should have told him to give you a discount now. I would be upset personally.
I was afraid to use my new batch of Mods due to my luck. No problem though. VA can keep their 1/4 turn battery cap. Screw down is much easier. Since it is difficult to align it to snap in. I actually broke my Crown IV. You must wash and dry it after every few tanks. I did not know this. I corroded the inside contacts to the coil. I have a Paranormal to go to Evolv but have not even wasted my time. Will break again in 3 months. They are junk IMO.
Manny, see this guy was not a smooth deal either. I personally just can't deal with that anymore. Pick a VA and they ship it to you. Yours is very custom though the Mozaic. It is amazing how much lighter TI is. Like a feather. Lot of metal on this thing too. For spinners you want as heavy as possible. Every kid wants TI because they are stupid kids. I am no kid but spinners help with my fine motor control. It is sad, stores that say we card everyone. They do not card me! I would actually feel better if they did. The Primo TI is my new daily driver right now. Not a bad Mod at all. Just not custom made.
I paid way more than on that page you linked but it is #008 and looks good. It was more than the others at the same store. It was worth it. I just hate wasting money though. Like new Crown. I did not know so not my fault. Still, warranty is 30 days. Crown IV will blow clouds like an RDA. I just can't in here. Oh well, more battery life.
 

MannyScoot

Diamond Contributor
Member For 4 Years
I only use 3mg but vape all day. I love that one Manny. You should have told him to give you a discount now. I would be upset personally.
I was afraid to use my new batch of Mods due to my luck. No problem though. VA can keep their 1/4 turn battery cap. Screw down is much easier. Since it is difficult to align it to snap in. I actually broke my Crown IV. You must wash and dry it after every few tanks. I did not know this. I corroded the inside contacts to the coil. I have a Paranormal to go to Evolv but have not even wasted my time. Will break again in 3 months. They are junk IMO.
Manny, see this guy was not a smooth deal either. I personally just can't deal with that anymore. Pick a VA and they ship it to you. Yours is very custom though the Mozaic. It is amazing how much lighter TI is. Like a feather. Lot of metal on this thing too. For spinners you want as heavy as possible. Every kid wants TI because they are stupid kids. I am no kid but spinners help with my fine motor control. It is sad, stores that say we card everyone. They do not card me! I would actually feel better if they did. The Primo TI is my new daily driver right now. Not a bad Mod at all. Just not custom made.
I paid way more than on that page you linked but it is #008 and looks good. It was more than the others at the same store. It was worth it. I just hate wasting money though. Like new Crown. I did not know so not my fault. Still, warranty is 30 days. Crown IV will blow clouds like an RDA. I just can't in here. Oh well, more battery life.
Yeah custom modders take their time, but I'm having the guy build custom battery caps and custom buttons and custom chips..... custom plates...

But the guy sees the mod and thinks to himself, uhm 485J chip....small compact, and 100 watts .... No buttons .... One nipple..... I like....

New battery cap with new font......oh I like..... Metal buttons no wood..... Oh I like....

26650 ....no like, but special people like....oooh I try.....

So it's good he's getting new ideas from working with me.......

Yeah all tanks need a break down at least every month if you vape heavily...... Sugar accumulates, gasket get old..... Moisture from condensation..... Just routine maintenance.....

Your VA 008 is the mix I like..... I like burgundy color and light wood..... Or blue with light wood.....

Most of my mods have one form of blue in them.....

But realized the red wine color on the Kodama is nice..... So I thought light color wood, with black and red and burgundy..... What he hell..... Mozaic......
70a7f32aea5b2a3571b6aec0c4eabb3d.jpg
1edceaad171e7fba9923cf409b3496ba.jpg
08232f60fff27bd65c98d3bad2d729ee.jpg
50926b4af9620d982ac039e9797bd85d.jpg
5d7aa03a0a5243ddb02c24d31681df00.jpg
5e39f2984fcba54bf0c97c49b805e25e.jpg


Sent from my Pixel 2 XL using Tapatalk
 
Last edited:

fidola13

Silver Contributor
Member For 5 Years
Sorry it took a while to get back to you, been working and it kicks my old senior ass hard! I use the polishing pads, 1k grit, to get to the level I want. Then switch to 5k grit to start the polishing. Then I cheat- I bought some full sheets of 10k grit paper, cut it into 4 pieces, and strap it to a quarter sheet palm sander. Only takes about an hour or 2 to make it look like glass. Don’t know if it will work on my new one as (like yours) the metal is coated with some sort of dark material. Don’t want to scratch that off. May do what you did and use painters tape to mask it. I didn’t do the front because I didn’t want to fuck up the touch screen. Yours is looking really good! It is definitely worth the effort!

Thanks for the info! I use to have a palm sander but I’m pretty sure I gave it away. I’d be afraid of messing up but it would help tremendously. I have ms and it can be very painful.
 

fidola13

Silver Contributor
Member For 5 Years
I recommend a good week on 3600 to shave some exterior layers, a couple of days of 4000 to smooth her out ... An a month on 6000 to bring some shine and depth, and a month on 10000 or 12000 to mirror her out, then all you need is Renaissance ..... That's what it takes to get results.....

I spend more than a month on 10000 working on this one.... Keep it up.....you have made a drastic change on that mod....

You can stop if you are happy with the results ! It looks nice......

Use 3600 until you are covered in dust for a week...... (Follow the steps I mentioned) above...... Round sharp corners and wash the pads under cold water to get the dust out..... Let it dry and keep going.......

I can see on the mod you are still on the exterior layers of the wood.....

Or find a wood worker, furniture maker, a wood pro can make her tip top in an hour.......
ff211a5a5122f1bf92be022178240318.jpg


Sent from my Pixel 2 XL using Tapatalk

Ok! I’m still at it. I’ve just started feeling better so I’m pumped to get working on it again.
 

MannyScoot

Diamond Contributor
Member For 4 Years
Ok! I’m still at it. I’ve just started feeling better so I’m pumped to get working on it again.
Take your time and take a break in between dear...... Slowly..... And at a relaxed pace.....

Sometimes in the morning my fingers ache.... I'm going to buy a Dremmel and see if that helps with wood buffing pads......

Sent from my Pixel 2 XL using Tapatalk
 

fidola13

Silver Contributor
Member For 5 Years
Yeah custom modders take their time, but I'm having the guy build custom battery caps and custom buttons and custom chips..... custom plates...

But the guy sees the mod and thinks to himself, uhm 485J chip....small compact, and 100 watts .... No buttons .... One nipple..... I like....

New battery cap with new font......oh I like..... Metal buttons no wood..... Oh I like....

26650 ....no like, but special people like....oooh I try.....

So it's good he's getting new ideas from working with me.......

Yeah all tanks need a break down at least every month if you vape heavily...... Sugar accumulates, gasket get old..... Moisture from condensation..... Just routine maintenance.....

Your VA 008 is the mix I like..... I like burgundy color and light wood..... Or blue with light wood.....

Most of my mods have one form of blue in them.....

But realized the red wine color on the Kodama is nice..... So I thought light color wood, with black and red and burgundy..... What he hell..... Mozaic......
70a7f32aea5b2a3571b6aec0c4eabb3d.jpg
1edceaad171e7fba9923cf409b3496ba.jpg
08232f60fff27bd65c98d3bad2d729ee.jpg
50926b4af9620d982ac039e9797bd85d.jpg
5d7aa03a0a5243ddb02c24d31681df00.jpg
5e39f2984fcba54bf0c97c49b805e25e.jpg


Sent from my Pixel 2 XL using Tapatalk

Yeah she's going into the Polishing area today, went with titanium plates for weight......

Finally finished yesterday...... They completed the Manny new tube with an unique font ( only one made ) on my battery cap..... it's been a couple of years since they have built a 26650 mod.... And mine is the first and only one with theYihi SX 485J chip ....

The guy tells me post many images online, because people like they order now again more 26650 Java mods......

I told him and what's in it for me ? He says I make for you very beautiful mod and shinny...... Fuck me..... can't get over on anyone..... Ha

So they are also excited to pop one out that's unique........ I does help them when I post on Facebook and YouTube

And got the Yihi SX 485J with 26650 and 100 watts...... 100 watts is enough power......

e27097b37f801c01d03853caa582a893.jpg
a0329dcaa15a8b0dd4521f61db7290e6.jpg
653502f70be7bc1319a74d6348630658.jpg
a369c6fc4af54d569d72f9fb12be8709.jpg
fe9b3ab0c6b503d39c0386a5a469ea64.jpg


Sent from my Pixel 2 XL using Tapatalk

What a beauty! I’m almost afraid to ask how much it costs to get a custom mod that nice!!
 

GorGon27

Gold Contributor
Member For 4 Years
Glad you like mine Manny! I thought that was the best looking one I saw. You might want to get one. Small and lite. Plus rounded back. Getting the hang of the battery cap. If I figure it out it is indeed better. You had him do a lot of work so it took him time. I kind of like he tests it but he has to vape it himself? I am sure his work is good enough he can just test fire it once. JM can just throw his in the trash. I did not know tank needs upkeep. My bad. I broke it.
 

MannyScoot

Diamond Contributor
Member For 4 Years
Glad you like mine Manny! I thought that was the best looking one I saw. You might want to get one. Small and lite. Plus rounded back. Getting the hang of the battery cap. If I figure it out it is indeed better. You had him do a lot of work so it took him time. I kind of like he tests it but he has to vape it himself? I am sure his work is good enough he can just test fire it once. JM can just throw his in the trash. I did not know tank needs upkeep. My bad. I broke it.
I will wait and see what arrives next week...... I think this is my baby arriving .....

I'm like a woman on her 9th month waiting for a baby.....

The mod hasn't been Polished yet....

Those pics are after cutting.......

He's testing it correctly, after a mod is fired several hundred times is when things start to go wrong...... If it survives a day and night of Vaping, he knows it's working as programmed .........

You know how many Chinese mods I have opened and don't fire..... Brand New and broken....

QA assurance...... Is welcomed


71796b0c29409d46a25e314ffc161987.jpg
df9e06b3a9777e7c271da3d8ae6031c1.jpg
 
Last edited:

MannyScoot

Diamond Contributor
Member For 4 Years
The custom tip and ring will be the way to go. Can’t wait to see the full setup.

And hey, if you ever wanna switch things up, I think almost the entire mesh pro family would look great on it...

4d740c4c872d5d5e826ec5c12d52cd7b.jpg
I have all kinds of tanks.... I use this first one the most since it's blue.... But I will find something to match her up .....
6e396493f10780719bbdae7e5b222eac.jpg
0f8faa8849671e64ce745fb8a5d197dc.jpg
6435feeb474bdb3bde3721d52038513f.jpg
3e4ad09f294a60dc4c98227e325c9a91.jpg
bee5fea9401a0c43c03e3dcdcaf550c5.jpg
12e04b2d73e52b674637bef26ea1e5c9.jpg
2e06794a01cfcac83cdb2ba145aef395.jpg
6e01b3c8bb507f22b71b3674c323f9fa.jpg


Sent from my Pixel 2 XL using Tapatalk
 

MannyScoot

Diamond Contributor
Member For 4 Years

GorGon27

Gold Contributor
Member For 4 Years
The new VA do not have the "hair spray" coating anymore. They are mirror polished with no coating. Even #008 is. The Primo TI has only been out about 6 months. So they can be sanded as needed. Of course they polish it on a machine for 5 minutes. That is fine if you know how to do it. Otherwise you can easily destroy the Mod.

I am not so into matching things but I understand why other people would want to.
I just use stuff that kind of matches with anything.
 

GorGon27

Gold Contributor
Member For 4 Years
Just had a big scare! VA #008 was dead, no screen! I nearly shit my pants! Then I realized the battery adjustment screw was lose! Back online. Phew!
I kind of doubt fuse can blow at 15W LOL. I must say VA's "Theme" is very nice. Not changing it. If I do I will certainly save it first. I have a Theme on one Mod that is very difficult to use. I need to change that. In fact I will right now. Manny, I hope your Mozaic vapes as good as it looks! That is a true custom. You designed it yourself. You and them did damn nice too.

Edit: 510 that has middle piece for the actual threads sucks. Of course that is what JM uses and also what broke in 4 day's. Mozaic 510 is very good. VA requires a special tool to remove.

I just hope this man keeps his word and will refund me. I am sure he will. He seems to be a very good Guy.
 

MannyScoot

Diamond Contributor
Member For 4 Years
The new VA do not have the "hair spray" coating anymore. They are mirror polished with no coating. Even #008 is. The Primo TI has only been out about 6 months. So they can be sanded as needed. Of course they polish it on a machine for 5 minutes. That is fine if you know how to do it. Otherwise you can easily destroy the Mod.

I am not so into matching things but I understand why other people would want to.
I just use stuff that kind of matches with anything.
Yeah the new Vicious Ant has more resin in the wood...... Which makes them easier to polish and hold lustre..... It's why the DPM holds that shine......

I don't care about trying to match, I want to be able to use the drip tip which is 510 and that beauty ring which is also for a 20mm...

e9ab48a45231dab3575a307bdcdcb2aa.jpg


Sent from my Pixel 2 XL using Tapatalk
 

Roman_RO

Bronze Contributor
Just made my 1st fussed Clapton and triple fussed Clapton wires. And they look good! Finally lol
I wish I had a good camera because these turned out really good to be my 1st ones ever. Sorry I'm excited lol.
 
Last edited:

Dan Hollis

Bronze Contributor
Member For 4 Years
I saw this video a wild back..... Check it out.....


Sent from my Pixel 2 XL using Tapatalk

Thanks. They seem to be a genuine “mom & pop shop” type operation. It’s interesting how little info there is online on this brand though, and even their own Instagram account has had no activity since 2017, so there is a chance these guys went out of business. Shame, since they seemed to really produce some quality stuff.
 

MannyScoot

Diamond Contributor
Member For 4 Years
Thanks. They seem to be a genuine “mom & pop shop” type operation. It’s interesting how little info there is online on this brand though, and even their own Instagram account has had no activity since 2017, so there is a chance these guys went out of business. Shame, since they seemed to really produce some quality stuff.
It's possibly left over inventory..... It Worth $500.00 when you think a Chinese Asmodus Minikin Kodama is $300.00



Sent from my Pixel 2 XL using Tapatalk
 

VU Sponsors

Top