Post your builds

[raymo2u]

Here's a little side~by side, i'll try and remember to snap a few next time i drop a new build in there All the parts between the v1-v2 are interchangeable as well. The mouthpiece, airflow, and decks are all compatible with each other. So you could still use the old deck with the new cap, or just screw the new mouthpiece on to the old atty, or use a colored airflow ring from the v1 on the v2 etc.

d

Mine finally got shipped out and should be here some time this week...I was hoping they would ship faster...I did pay for the quickest ship option hoping I'd have it today....The Exodus box mod should be here any day also and I may pair them up...

 

[scarecrowjenkins]

Mine finally got shipped out and should be here some time this week...I was hoping they would ship faster...I did pay for the quickest ship option hoping I'd have it today....The Exodus box mod should be here any day also and I may pair them up...

Nice! Even though its a little smaller in size, there is a lot more room on the deck to build. And having the space between the posts greatly improves the airflow. It's a beast

 

[Schmucko]

Vapemail!

Sent from my LG-H811 using Tapatalk

 

[raymo2u]

I did some framed staples today and I was going to make another set for the Griffin that hasn't arrived yet....but I through some into the Double Vision Clone. I've been practicing them for a few days trying to find the quickest and most efficient way to get them wrapped. I think Im getting on that #AsTightasChef's level with them Next Ill do the same for the Alien Framed Staples...
I always forget to take a Wire Wrapping Pic but I finally remembered this time. (Excuse my Lighting...)



I redid my Wallpaper on the Laisimo this morning also...figure I would share it

 

[Dawn0810]

Dual Ti coil 6wraps. My other Ti coil in the blue Diablo has been going since the end on January just rewicking it like once a week. I'm fr aid to take it out since its worked so well and it's my main vape so I'm happy with how long it's lasted and how well it's performed


Sent from the iPad in the basement of vapement

 

[raymo2u]

Dual Ti coil 6wraps. My other Ti coil in the blue Diablo has been going since the end on January just rewicking it like once a week. I'm fr aid to take it out since its worked so well and it's my main vape so I'm happy with how long it's lasted and how well it's performed


Sent from the iPad in the basement of vapement

I rock that same setup but with the 2.5ml Diablo!

 

[MidwestExpress]

I did some framed staples today and I was going to make another set for the Griffin that hasn't arrived yet....but I through some into the Double Vision Clone. I've been practicing them for a few days trying to find the quickest and most efficient way to get them wrapped. I think Im getting on that #AsTightasChef's level with them Next Ill do the same for the Alien Framed Staples...
I always forget to take a Wire Wrapping Pic but I finally remembered this time. (Excuse my Lighting...)
View attachment 42409 View attachment 42412 View attachment 42408
View attachment 42413View attachment 42410 View attachment 42411 View attachment 42407View attachment 42414

I redid my Wallpaper on the Laisimo this morning also...figure I would share it

I have to really work on my framed staple build. I can never kero the frames to the sides. Always comes together and ruins it. Lots of back winding but still don't get good frames...

Sent from my SM-G925V using Tapatalk

 

[raymo2u]

I have to really work on my framed staple build. I can never kero the frames to the sides. Always comes together and ruins it. Lots of back winding but still don't get good frames...

Sent from my SM-G925V using Tapatalk

What I do now is take 38 Gauge and cut it into 6-7 1 inch pieces. 1 piece is to bind the Ribbon together at each end, 1 piece is to set it up by the chuck. I normally have to pull the frames apart to get it in right, I dont put the Ribbon in the chuck, just the frames. I then use the Other Pieces to secure it in segments on the way down about every 5 inches. I move the closest 38g bind down inch b y inch as the wrap covers the wire. This is a no fail method as the wire is completely secured the entire length but it is time consuming. After you have gotten it down use less and less binds on the wire...

When you are binding the Wire hold it all between your thumb and middle finger and use your pointer and your other hand to bind the wire tight and flat. The more binding you have on it the more secured it is and the less chance it has on twisting or failing.

Next time I do this build I will do it with 5 x .3, 28K Frames, and 44N80. The build I did today is a .1 and I can go the full 200w on all my mods and it barely gets warm, I have to close the AFC down almost half way to get a nice draw I like.

 

[scarecrowjenkins]

For anyone interested, this is how i go about polishing my builds:

 

[itsmenotyou]

For anyone interested, this is how i go about polishing my builds:

Watched it a few times. I don't understand how he does such clean builds with ease.

sent from a dumb operated smartphone

 

[iLiptiKal]

Watched it a few times. I don't understand how he does such clean builds with ease.

sent from a dumb operated smartphone

Practice


Sent from my iPhone using Tapatalk

 

[raymo2u]

For anyone interested, this is how i go about polishing my builds:

I may use 1 of the pics you posted earlier as my Laisimo Wallpapers...Very nice pics!

 

[scarecrowjenkins]

Watched it a few times. I don't understand how he does such clean builds with ease.

sent from a dumb operated smartphone

If you pull tightly on the far end of the wire and slowly turn the drill it wraps a perfect coil on its own. I usually do about 6 wraps more than my goal and remove the 3 wraps on each side and use the middle section. It always comes out clean for me that way

 

[itsmenotyou]

Practice


Sent from my iPhone using Tapatalk

I can get some beautys it just takes me serious time to go all ocd and control lol

sent from a dumb operated smartphone

 

[scarecrowjenkins]

I may use 1 of the pics you posted earlier as my Laisimo Wallpapers...Very nice pics!

Haha, be my guest!

 

[itsmenotyou]

If you pull tightly on the far end of the wire and slowly turn the drill it wraps a perfect coil on its own. I usually do about 6 wraps more than my goal and remove the 3 wraps on each side and use the middle section. It always comes out clean for me that way

Thank you for the tip I was freehanding the coils before polishing. Oh and my local Wal-Mart carries 3000 grit in the automotive paint area now

sent from a dumb operated smartphone
Eta. Grr tapacrap

 

[raymo2u]

Vapemail!

Sent from my LG-H811 using Tapatalk

I didnt realize how you got those until now

 

[blakemorder]

I finally managed to make something that wrapped nice and even under the macro lense, and I got my 40g alien wrap to work all on the same build lol
26n 40n aliens 2.5mm ID. Will post install pics later

Sent from my XT1095 using Tapatalk

 

[MidwestExpress]

I finally managed to make something that wrapped nice and even under the macro lense, and I got my 40g alien wrap to work all on the same build lol
26n 40n aliens 2.5mm ID. Will post install pics later

Sent from my XT1095 using Tapatalk

I have tried aliens with extra 40 when wrapping my fc's. I can never get it to keep the wave. It always straightens out. I guess I'm pulling too hard for that wire. I need to try to start making aliens fire real. I have some 32 I can use. Then graduate to 40!

Those coil look good man!

Sent from my SM-G925V using Tapatalk

 

[Dawn0810]

So I was playing with some 316L SS today and making claptons and fused claptons I'm loving them I'm using 26g SS for core on the fused and 24g on the reg Clapton wrapping them with 37g 316L SS I'm so happy I found such high gauge SS I have 37,34&31.


Sent from the iPad in the basement of vapement

 

[Dawn0810]

I rock that same setup but with the 2.5ml Diablo!

I love the Diablo I have them on 3 of my mods


Sent from the iPad in the basement of vapement

 

[MidwestExpress]

So I was playing with some 316L SS today and making claptons and fused claptons I'm loving them I'm using 26g SS for core on the fused and 24g on the reg Clapton wrapping them with 37g 316L SS I'm so happy I found such high gauge SS I have 37,34&31.


Sent from the iPad in the basement of vapement

Where did you find the high gauge stainless?

Sent from my SM-G925V using Tapatalk

 

[Dawn0810]

Where did you find the high gauge stainless?

Sent from my SM-G925V using Tapatalk

EBAY they sell one pound of wire for 15$ so. Got 18,200ft of the 37g the only downfall is its 15$ to ship but they do combine shipping so I got 37,34,31 and 24 all at once I can get the link but it's the only company I've found that have the high gauge SS


Sent from the iPad in the basement of vapement

 

[Dawn0810]

They actually have their own website centralwire.com check them out since you the price of their EBAY store


Sent from the iPad in the basement of vapement

 

[Dawn0810]

They won't let me post the link but they're the only company on eBay that have it


Sent from the iPad in the basement of vapement

 

[blakemorder]

I have tried aliens with extra 40 when wrapping my fc's. I can never get it to keep the wave. It always straightens out. I guess I'm pulling too hard for that wire. I need to try to start making aliens fire real. I have some 32 I can use. Then graduate to 40!

Those coil look good man!

Sent from my SM-G925V using Tapatalk

Thanks! Yea I pinched the wire very very lightly after stretching out about halfway to get those, its pretty fragile. All the gaps are from me jerking just a little bit as I moved forward

Sent from my XT1095 using Tapatalk

 

[itsmenotyou]

I didnt realize how you got those until now

Could i get an eBay link for where you get your Griffin good sir?
I got the go-ahead from the gf for cleaning and moving around the shit in the garage

sent from a dumb operated smartphone

 

[EndDetour]

Multi-core staggered fused Clapton
28x36n80 core
26n80 frames staggered and double space fused in 36n80

4.2mm i.d.
.18 ohms

Wicking is fantastic, vapor is warm and damn flavorful. Ramp time is nearly nonexistent.
Worth a try


-every animal has an adequate amount of gray matter in its cranium to tan and preserve its own hide-

 

[iLiptiKal]

Multi-core staggered fused Clapton
28x36n80 core
26n80 frames staggered and double space fused in 36n80

4.2mm i.d.
.18 ohms

Wicking is fantastic, vapor is warm and damn flavorful. Ramp time is nearly nonexistent.
Worth a try


-every animal has an adequate amount of gray matter in its cranium to tan and preserve its own hide-

Clean and gorgeous dude. You make me want the Aeronaut for beefy singles like that.


Sent from my iPhone using Tapatalk

 

[EndDetour]

Clean and gorgeous dude. You make me want the Aeronaut for beefy singles like that.


Sent from my iPhone using Tapatalk

You can fit duals, quads, Octos... Hell..if you remove the top pipe you could fit a midget in there. I find my sweet spot is a beefy single or parallel variation that wicks well. If you do it right there's no loss of vapor or flavor and a battery can last damn near all day...
Just buckle down and get it when you can, however, I can't say it enough...do not get the clone. $64 exclusively on eciggity.com for the authentic.


-every animal has an adequate amount of gray matter in its cranium to tan and preserve its own hide-

 

[raymo2u]

Multi-core staggered fused Clapton
28x36n80 core
26n80 frames staggered and double space fused in 36n80

4.2mm i.d.
.18 ohms

Wicking is fantastic, vapor is warm and damn flavorful. Ramp time is nearly nonexistent.
Worth a try


-every animal has an adequate amount of gray matter in its cranium to tan and preserve its own hide-

Show off...

 

[raymo2u]

Could i get an eBay link for where you get your Griffin good sir?
I got the go-ahead from the gf for cleaning and moving around the shit in the garage

sent from a dumb operated smartphone

Griffin LINK

 

[itsmenotyou]

Griffin LINK

Thank you good sir!

sent from a dumb operated smartphone

 

[EndDetour]

Show off...

Just a lil...


-every animal has an adequate amount of gray matter in its cranium to tan and preserve its own hide-

 

[itsmenotyou]

Griffin LINK

Also found this one. They have it in ss and a few buck cheaper. Look legit? I know nothing about the Griffin other then the obvious lol
EDIT: the seller is wetwicks. I'm not smart enough to link to ebay
sent from a dumb operated smartphone

 

[raymo2u]

Also found this one. They have it in ss and a few buck cheaper. Look legit? I know nothing about the Griffin other then the obvious lol
EDIT: the seller is wetwicks. I'm not smart enough to link to ebay
sent from a dumb operated smartphone

No clue, that one link I sent is the one I use as I know they are selling Authentics...

 

[itsmenotyou]

I did it! I did it! Now where's my mailman

sent from a dumb operated smartphone

 

[scarecrowjenkins]

Thank you for the tip I was freehanding the coils before polishing. Oh and my local Wal-Mart carries 3000 grit in the automotive paint area now

sent from a dumb operated smartphone
Eta. Grr tapacrap

Nice! I'll try and remember to take a photo of it, but they make these things for nail polishing that i want to try, just for the final stages. I usually do 320, 600, 1,000, 2,000, and then a 12,000 pad thing. I do the 2,000 dry and then again wet as well

 

[raymo2u]

I did it! I did it! Now where's my mailman

sent from a dumb operated smartphone

Im sure that Guy selling Kanthal D, his income is due to just us on this thread

 

[itsmenotyou]

Im sure that Guy selling Kanthal D, his income is due to just us on this thread

First deal with him and with 38. Usually 36 is the smallest I can deal with but for the price if i waste a few hundred feet learning I won't feel bad lol

sent from a dumb operated smartphone

 

[raymo2u]

First deal with him and with 38. Usually 36 is the smallest I can deal with but for the price if i waste a few hundred feet learning I won't feel bad lol

sent from a dumb operated smartphone

He also has 40g/44g/46g and 48g or 50g I believe but in sizes higher then 44g he only does them by 150ft...

 

[itsmenotyou]

He also has 40g/44g/46g and 48g or 50g I believe but in sizes higher then 44g he only does them by 150ft...

Probably takes close to 60 foot to do a 50ga fused clapton huh? Lol

sent from a dumb operated smartphone

 

[raymo2u]

Probably takes close to 60 foot to do a 50ga fused clapton huh? Lol

sent from a dumb operated smartphone

More like around 8-10ft for every 2-3ft of Fused clapton...Its alot for sure!

 

[raymo2u]

Wanted to post the Setup Im using for that Framed Staple I did, I had it on the Laisimo but I noticed I could crank it up to 200w and it still be a tad lower then where I want it for warmth. I tossed it onto the Hohm Wrecker and at 125w its hotter then the Laisimo at 200w...something is up there..Im using the Twisted Messes Mini Double Vision Top Cap...



This is for @Dawn0810 :



The Exodus Box Mod and the Twisted Messes V2 will be here Wednesday...any Ideas for a CRAZY build for that setup?

 

[blakemorder]

Got the 26n 40n aliens installed in the twisted messes, messed up the coil a bit but it still vapes fantastic. Ohm'd out to .09 so it's a little warm.

Sent from my XT1095 using Tapatalk

 

[EndDetour]

More like around 8-10ft for every 2-3ft of Fused clapton...Its alot for sure!

Did you mean 2-3"?


-every animal has an adequate amount of gray matter in its cranium to tan and preserve its own hide-

 

[Schmucko]

I was trying 24/46 fc's and the shit kept breaking on me. That stuff is thin

Sent from my LG-H811 using Tapatalk

 

[GEEKVAPE]

I sent a PM to @GEEKVAPE asking if they were going to release a 25mm Griffin anytime soon..that was 4 days ago and still no reply..was wondering what's up with that...lol

Sent from my QTAQZ3 using Tapatalk

Buddy, sorry for that. We will see it whether it goes out or not recently.

 

[scarecrowjenkins]

So I was playing with some 316L SS today and making claptons and fused claptons I'm loving them I'm using 26g SS for core on the fused and 24g on the reg Clapton wrapping them with 37g 316L SS I'm so happy I found such high gauge SS I have 37,34&31.


Sent from the iPad in the basement of vapement

Atomizer Wick is about to start selling stainless in every gauge from 22-44g. I've got some and it makes for some gorgeous coils. Haven't used it for a full temp control build yet, but i've been using the 42g as outer wire and i've been really happy with the results

 

[MidwestExpress]

Wanted to post the Setup Im using for that Framed Staple I did, I had it on the Laisimo but I noticed I could crank it up to 200w and it still be a tad lower then where I want it for warmth. I tossed it onto the Hohm Wrecker and at 125w its hotter then the Laisimo at 200w...something is up there..Im using the Twisted Messes Mini Double Vision Top Cap...
View attachment 42446 View attachment 42448
View attachment 42447

This is for @Dawn0810 :
View attachment 42445


The Exodus Box Mod and the Twisted Messes V2 will be here Wednesday...any Ideas for a CRAZY build for that setup?

I notice things get hot at lower power on the g2. 70 watts is like 90 on my lavabox.

Sent from my SM-G925V using Tapatalk