I feel ya, i have 2 diablos, a gemini and an indestructible on the way that i need to build for but i cant decide what
Sent from my LG-H811 using Tapatalk
Become a Patron!
Post your builds
- Thread starter Vape_geek
- Start date
I feel ya, i have 2 diablos, a gemini and an indestructible on the way that i need to build for but i cant decide what
Sent from my LG-H811 using Tapatalk
Its pretty damn identical, the AFC Ring is a bit crunchy feeling when turned and the juice flow holes are slightly cut off at the top but other then that its the same. It comes with Red and Green extra O-Rings also. Ill do a comparison soon.
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
What's that?
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
So, like Schmucko, I picked up a corded drill at the pawn shop the other day. 2900RPM variable speed Hitachi FDV-16VB hammer drill. This thing is fantastic compared to the 1200RPM Harbor Freight special that I've been using! Seriously, it's gonna cut down on my building time by an enormous amount. It's gonna take a little getting used to, but I'm happy with it.
@Schmucko - Thanks for the tip!
@Schmucko - Thanks for the tip!
You're welcome speedy!So, like Schmucko, I picked up a corded drill at the pawn shop the other day. 2900RPM variable speed Hitachi FDV-16VB hammer drill. This thing is fantastic compared to the 1200RPM Harbor Freight special that I've been using! Seriously, it's gonna cut down on my building time by an enormous amount. It's gonna take a little getting used to, but I'm happy with it.
@Schmucko - Thanks for the tip!
Sent from my LG-H811 using Tapatalk
Thanks buddy... Let me know if the glass Is interchangeable. Cracked my glass last night and had to go to the back up one it comes with.... I gotta order some replacements from fasttech later but if the glass is interchangeable I might just grab a clone for the extra $8
Sent from my HTC One_M8 using Tapatalk
Has anyone here vape on one of those new ceramic coil tanks? I bought my kid sister a Uwell Crown for her first atty but if these ceramic coil tanks are any good I might just buy her one of those this way she doesn't have to worry about anything for 6-7 months (shes in a diff state now so I can't physically help her :^[ ) , thanks on advance guys.
Sent from my HTC One_M8 using Tapatalk
Sent from my HTC One_M8 using Tapatalk
Ipv just dropped a new coil less tank. Isn't ceramic but has a heating element that is soars to be good for 3 months. Just needs to be dry fired to clean and wicked.
Sent from my SM-G925V using Tapatalk
The Glass is interchangeable...its 1:1 except a few machining flaws..
Yea its the same as the Altus but looks alot like a white Crius...IPV Pure Tank
I have no clue what to build when I sit at the Drill....Drawing a Blank at what to throw together..
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Go look on Instagram. There are always builds there that can inspire a new idea. Or even recreate what's already there to see how you like it.
Should make a Coil Stand....like for real! One you can use to hold a Coil as Artwork, like a floating mount or something..Maybe I should start making them!
Like this but with postholes lol
I look at them all day, most of them I see I couldnt pull off even if I had the time, I would like to have a bit more imagination like I did a few months ago when I was just throwing stuff together and seeing how it came out. Now that I have the wire to do it I just dont know where to start, maybe thats the real issue...
I received another Twisted Messes V1 today, this is number 6 in the Collection
2 x 28KA1/38KD Fused Claptons (9 Wraps/3mm ID @ .46 Ohms)
I also had a Lush RDA come in today....anyone have any thoughts of what I should put in it? Im getting Coil Builders Block and cant think of enough different builds that I can pull off to shove in all these RDA's, I still need to build the Black/Gold TM, a Double Vision, Lush, and when they arrive the Goon and So Horney RDA's...
You could send them to me, I will try builds out in them and let you know what I like the best!!
Poppa (K)
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Instagram is my friend
during the Goon comp, i had 3 different ideas on the go at the same time. if i got stuck on something, i'd put it aside and move onto something else. once i figured out a solution or calmed down; then i'd go back to that particular problem. i'll sit and spin clapton wire just to get creative juices flowing. some of it would be decored for aliens, or twisted up for some idea or another. by doing this, i'm in my 'space' that would be my dedicated work area, drill in hand, and my current playlist blaring. idk, that's what works for me
you got the skills. now go build us some bad ass coils
Loving that twisted mess
Sent from my SM-N920T using Tapatalk
I tried a zipper build today. I'm not quite ready to try making claptons again just yet. lol Made it with 28awg kanthal, 3mm i.d., comes in at .32 ohms.
Wow, good shit man. I'm impressed at the stage of coil building your at for such little time in the vaping world....
Sent from my HTC One_M8 using Tapatalk
If you have an extra top cap laying around for a Twisted Messes give me a shout, we can work something out.... I'd love to have one of these for the extra deck of the Double Vision. Thanks in advanced!
Loving that twisted mess
Sent from my SM-N920T using Tapatalk
Sent from my HTC One_M8 using Tapatalk
I said the same thing when I posted a really fine shot of a Fraple I was making...looky here..Wow... I kinda want to get an ultrasonic cleaner now
24/40 fc's with the macro lense
Sent from my LG-H811 using Tapatalk
No, just the cheap one. Just got it today.
Sent from the future with my Flux Capacitor enabled Note 5
That's awsome!!!
Sent from my SM-N920T using Tapatalk
Sent from my SM-N920T using Tapatalk
Is that button lighting up with a white led?
Sent from my HTC One_M8 using Tapatalk
That's the screen. Fire button is under my top finger.
Sent from the future with my Flux Capacitor enabled Note 5
Poppa (K)
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
thnx
i think the 15 yrs i've spent making fishing flies really helped me pick this up.
Poppa (K)
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
i just use a toothbrush with some dish soap, and rinse the hell out of it. after that, the rubber gloves come out. skin and oils can ruin photos (trust me i know :/ )Wow... I kinda want to get an ultrasonic cleaner now24/40 fc's with the macro lense
Sent from my LG-H811 using Tapatalk
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
So a dude ordered some coils, one of which was a pair of framed alien staple coils. This one didn't pass my Q/A, so I figured I'd try it on the Aeronaut clone because I haven't used it yet. BTW, if you order a clone, MAKE SURE it's a 1:1. The one I ordered just has screws, NOT the clamps. I didn't realized that until I got it.
Anyways, this build puts out some serious clouds. Even better than a lot of the more popular dual coil cloud builds. The Aeronaut is not so great on flavor, though. The top air flow holes kinda kill the flavor, but definitely add to the cloud production. If I had put this in a Velocity, the flavor would have been much better.
6x0.5K, 2x26SS316L, 26N80, 3.0mm ID, 0.17Ω
Anyways, this build puts out some serious clouds. Even better than a lot of the more popular dual coil cloud builds. The Aeronaut is not so great on flavor, though. The top air flow holes kinda kill the flavor, but definitely add to the cloud production. If I had put this in a Velocity, the flavor would have been much better.
6x0.5K, 2x26SS316L, 26N80, 3.0mm ID, 0.17Ω
Thats how every Aeronaut clone is, they are the Pre Production Aeronaut...I havent seen a Post production model clone yet.
No extra Tubes either huh? Its one of the only 1:1 RDA's that are a let down, the clone was made of the first prototype of the Aeronaut but the producer changed the design at the last minute with the clamps and other small changes, this is why they are different. The clone isnt the Aeronaut that was released...its almost a different RDA and not a clone due to this..It was quite a let down when I got it.
They don't make a 1:1 clone...I gave you fair warning Brody. That $64 price tag is well worth it. I want that goon so bad right about now.
-every animal has an adequate amount of gray matter in its cranium to tan and preserve its own hide-
Idk if this is widely known or not but I was just playing around with the RX200 and found something that wasn't in the manual... When the device is off, press the fire button and the down button and it will display each battery level by volts (I believe that's what its displaying). Again, I dint know if this function is know to all, or If I just stumbled on it....but its a pretty cool feature since when the device is on it only shows a little digital battery meter and not an exact %.
Sent from my HTC One_M8 using Tapatalk
You saved my ass the day you said not to get the clone...it was literally in my cart!
2 more days till my goon should be shipped out
Edit: @raymo2u you ordered one right?
Sent from my HTC One_M8 using Tapatalk
Keep an eye on them, I'm down for a group buy when there back in stock!
Sent from my HTC One_M8 using Tapatalk
My Twisted Messes Squared should be here the day the goons get shipped out. Next week is going to be frkkken GOLDEN
Sent from my HTC One_M8 using Tapatalk
Sent from my HTC One_M8 using Tapatalk
Yea I cant wait for Monday for them to be shipped out, Im glad I paid when I did, I heard that this order is already sold and there will be another wait afterwards...I ordered a Brass version to match all the Mechs...I cant wait for the Goon, 40mm Mason and So Horney RDA to come....Some Crazy RDA's to build for...Ill have to figure out what Im doing..
That is a pretty neat feature. I'll have to remember that. That's one thing I like about the Cuboid, it shows each battery. It'd be nice if they added something to the RX firmware to show that without having to turn it off.
Yeap. I actually just got mine today also (well yesterday now for some) and I love it. I wish it was a little lighter but ehh what are ya gonna do. I wish the atty connection was a bit more centered this way we could fit 25mm attys and what not.
I also wish jaybo designed another version... The RX200N , Nano... All he'd have to do was remove the third battery, make a smaller battery cover and once again he could Center the 510 connection, and boom, whalah you got a nano rd200! I'd buy one!
Sent from my HTC One_M8 using Tapatalk
If you really like the chip you can check out the Vapor Flask Vape Forward line. They are a collaboration with wismec and have the same chip in them. I picked up the single 18650 to use as a small work mod and really like it. The only complaint that I have is it tends to chew up the wrap on the neg side on the battery with the battery door. I have extra wraps and its only on the very bottom of the neg side so not really a big issue in my book.
This outta be fun
Sent from my SM-N920T using Tapatalk
OK... Why have you not shared the link! Trying to keep it all to her self! Stingy stingy!!! Haha
Sent from my Nexus 7 using Tapatalk
I knew I forgot something when I was looking at it again it just had the TM2 I couldn't see the squared saying but 3fvape is pretty good with their clones. So it's http://www.3fvape.com/rebuildable-a...ainless-steel-22mm-diameter.html#.Vu1Ku0X3aJI
Sent from the lab in my basement of vapement