Thanks bro! a small victory since my vape mail still isn't here.@Qlippoth those Tsuka's came out amazing!! Good Job!
Sent from my SM-N920C using Tapatalk
Thanks bro! a small victory since my vape mail still isn't here.@Qlippoth those Tsuka's came out amazing!! Good Job!
I was trying for a Alien Staggerton with Ribbon but I used the wrong decore size for the wrap or something and the Alien Center went vertical...I didnt want to stop and it just made itself...I tried wrapping that but it wouldnt wrap neither horizontally or vertically so its a waste....though I was thinking maybe it would be cool for the center of one of those Altered Bridges but I doubt Ill be able to replicate that mohawk stagg thing againDid something similar (albeit, much shorter) yesterday by accident. I was making aliens and one backwound on itself at the end. Now if I could only do this on purpose!
View attachment 62882
Found a bunch of old wires and decided to use them. Should've used 38g to fuse :-\
27gkd/34gkd fused with 36gn80
Sent from my H220 using Tapatalk
I use the same wire I usually do P and K.Bee/Lightning Vapes. I always stretch the Ribbon and wire pulling it off the spools also.
I didnt have an issue with the Ribbon twisting...I always, ALWAYS have the Ribbon "floating", not attached to drill or swivels and held on to the core with Ribbon Sliders. For the Core Ribbon I make sure its completely tight and loosen the Spool Tamer for staggering, the Ribbon should be spinning freely. You can actually make this very quickly, After you get the core, attach the Ribbon sides on you should be able to go full speed to fuse it if you let the spool spin and hold it at a leading angle.
I made something similar to the Mage build for the Merlin and Limitless I received today...
View attachment 59144
View attachment 59139 View attachment 59143 View attachment 59141View attachment 59142 View attachment 59140 View attachment 59145 View attachment 59147 View attachment 59146 View attachment 59138
It was around .12 but it definitly was a flavor build, I made one similar for the Merlin RTA right after. The clouds are similar to a 28g/38g Alien 5 Wrap/3mm ID coil. Its just a great build that doesnt take alot of time compared to the more complex builds Ive done.Wow..Looks amazing, in an overkill type of way but impressive! What did it ohm out at and hows the flavor/clouds??
Pretty mean looking.......
probably the only gripe with the roughneck is its 3 post design... 3 posts in series is not convenient at all.
will probably get the 2 post eventìually..
Sent from my SM-N920T using Tapatalk
Man that's a pretty sick coil....Sick build. That is a ton of wraps tho. What did it ohm out at?
Glad you like it! I actually met Matt and Vanessa from "Suck My Mod" last Sunday. Matt is the one who developed the Theorem.A Chef coil. Fused Clapton. Insane flavor and vapor in the Thereom. Loving this setup.
Damn, dude - That is some incredible color, as well as a really clean build!More stuff from yesterday. Some of the best coloring Ive personally have ever done and then captured well.
Half Staggered SFC:
I know. I sent him as email about. Love that tankGlad you like it! I actually met Matt and Vanessa from "Suck My Mod" last Sunday. Matt is the one who developed the Theorem.
I got some shoes to match that build!More stuff from yesterday. Some of the best coloring Ive personally have ever done and then captured well.
Half Staggered SFC:
Another Bridge Coil Test, This time its Half Staggered SFC's with a SSFC Center:
The only thing its for is CoilWars..Bridges and Extensions is the theme this week and Ive never made any before...they are COMPLETELY USELESS COILS...and they are very irritating to make. The bridge is a hotspot machine, the entire length turns into a bunch of free ranging hotspots that never seem to come out until it melts.Any benefits to the half staggered, or is it more of a porn build?
VERY NICE!! Should be proud!Stitched enigma. It's not perfect but I'm proud of it. Very hard but fun to build. I was hoping the nichrome ribbon would color up.
2x28gka1/8x.4n80 8x.4ka1/2x38gn80 interlocking and 38gn80 stitch at .12 Ohms
Sent from my SM-N920C using Tapatalk
Thanks broVERY NICE!! Should be proud!
Sometimes a wrong result could be a new design......Did something similar (albeit, much shorter) yesterday by accident. I was making aliens and one backwound on itself at the end. Now if I could only do this on purpose!
View attachment 62882
It really wasnt that long ago when I was only making Fused Claptons and rarely Id make framed staples....a few months and I got more creative and tried new things....it was only after alot of practice where I got to the point where Im comfortable with just about anything now...except braids...to hell with braidsPretty bad ass..... I'm still working on the beginning level....
View attachment 63235View attachment 63236
Sent from my 710C using Tapatalk
his for Mohawks, only stretch the decore until you see little triangles in the decore length. Then stop and try wrapping them.Them mohaks are challenging..... I have ended with a couple of nests, but not giving up......
Sent from my 710C using Tapatalk
Yup. I remember saying how much I hated ribbon and we both thought it was pointless - just for show. Now, I love making framed staples, and mega ply regular staples. And they give a great vape with the right mod.Im sure Chef remembers
What are you running it on? Sounds pretty burlyI built my first Clapton wire tonight. The only problem Is that I used 2 strands of 24 gauge as the core wire then used 26 gauge to wrap it. It was HUGE. I could barely get it in my rda posts.
I used a Velocity RDA and a RX 200S It came to 0.22 Ohms. I Used up allot of battery power pretty quickly I had to take it off my Mod. I learned my lesson. Now Im shopping for 26 gauge core with 30 gauge to wrap it for my newer Clapton builds. It pretty fun/ I also need those swivels.What are you running it on? Sounds pretty burly
Sent from my SAMSUNG-SM-G930A using Tapatalk
Honestly, I would do 32g outerwe wrap, that's what alot of the companies do for basic clapton. For fused clapton I would say 28/36g. Just a suggestion, but hope it helps.I used a Velocity RDA and a RX 200S It came to 0.22 Ohms. I Used up allot of battery power pretty quickly I had to take it off my Mod. I learned my lesson. Now Im shopping for 26 gauge core with 30 gauge to wrap it for my newer Clapton builds. It pretty fun/ I also need those swivels.
Yeah I was gonna say something bout battery consumption and whatnot but figured I'd leave that to somebody who has more experience with fused Claptons. I made the mistake of doing 26g wrapped around 26g before it's was a little much . But I'm still learning to do emI used a Velocity RDA and a RX 200S It came to 0.22 Ohms. I Used up allot of battery power pretty quickly I had to take it off my Mod. I learned my lesson. Now Im shopping for 26 gauge core with 30 gauge to wrap it for my newer Clapton builds. It pretty fun/ I also need those swivels.
Thank you very much. I was unsureHonestly, I would do 32g outerwe wrap, that's what alot of the companies do for basic clapton. For fused clapton I would say 28/36g. Just a suggestion, but hope it helps.
I'm not crazy, my mother had me tested.
I'm eager to see how it turns out. Nice work with those large gauge fused claptons though.Thank you very much. I was unsure
Just keep at it man. ️ you'll get there. I'm struggling with Mohawks as well and it feels like when I was just starting to learn aliens. I cannot wrap them properly for the life of me. Ray gave lots of good tips so I'll try again soon.Pretty bad ass..... I'm still working on the beginning level....
View attachment 63235View attachment 63236
Sent from my 710C using Tapatalk