Atties: Nuppin' is still King, Honorable mention: Goon 1.5
Mod: Pdib NutPunch, Pulse
Bottles: Inexpensive silicone bottles from FT
#Nuppin4Life
Sent from my iPhone using Tapatalk
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
#Nuppin4Life
Sent from my iPhone using Tapatalk
Just snagged this for the pocket!
Gear stubby... nice!
Atties: Nuppin, Hadaly
Mods: I’m old school so my P67, LBC jr, V3 toaster
Bottles: Cappy full silicon ones, silicone clones from China
Sent from my iPhone using Tapatalk
Mods: I’m old school so my P67, LBC jr, V3 toaster
Bottles: Cappy full silicon ones, silicone clones from China
Sent from my iPhone using Tapatalk
Well, let me preface the answer with the fact that the one I have is a clone. It is very possible the authentic is much better, we've seen that many times. The Pocket is lacking in flavor, possibly the coils I've used in it, has too much air and when closed down it tends to get a bit hot. I guess I'm spoiled with the Nuppin?
I found it to be pretty flavorful with a .47 build, definitely airy but not overly airy.
Atties : CoilArt DPro, Dead Rabbit, Apocolypse
Mods: BVB Double Barrel, Toasters, Lil orca, Driptech DS
Bottles: sjmy 6ml silicone
Sent from the Twilight Zone!
Mods: BVB Double Barrel, Toasters, Lil orca, Driptech DS
Bottles: sjmy 6ml silicone
Sent from the Twilight Zone!
Well since I do not have a Nuppin or plastic sqounker I will say Pico Squeeze and Wasp Nano.
I wouldn't say it is lackluster, just missing the little extra punch of flavor I get from a couple other atties. The extra air was a deciding factor for me.
I ran it with regular round wire and fused claptons ranging from .23 to .5 and I just couldn't nail the vape I like when I had the Pocket. Tried it on my squonks, then tried it on the DNA (VW)... It was a nice vape, but just not for me.
Took some playing around with coil position for me but once set i found it nice , its more restrictive than Narda
Sent from my ONEPLUS A3003 using Tapatalk
Atties- Pulse 22
3d mod- TLF
Regulated- inbox
Sent from my LG-D850 using Tapatalk
3d mod- TLF
Regulated- inbox
Sent from my LG-D850 using Tapatalk
I think it was a good vape, just not my vape. And I must of adjusted the 7+ coils I ran through it on height etc.. Just the same as when It took me at least a dozen coils nailing the vape in the Haku... of all of them, there are 3 I like, with one reign supreme.
I always give a RDA a fair shake... but if the vape isn't close or better than what I use currently...there is no sense to keep it. And I truly don't mind giving stuff I know I am not using to those that are interested in it...especially a clone.
I would like a NarDa...probably buy a Clone...but thing is... I only have 3 squonks, 2 already occupied by Haku's, well all 3 are, but 1 Haku is a Clone lol.
Ah in a month or two I should finally have a 4th mod... 67 Neo3 Mosfet
1 persons favorite rda/build is anothers OMG WTF kind of PUKE SHIT you vaping
Im awaiting a 4th sqounker mod Mosfet version myself , Narda , Pocket an Mulciber are my current favs ,I think it was a good vape, just not my vape. And I must of adjusted the 7+ coils I ran through it on height etc.. Just the same as when It took me at least a dozen coils nailing the vape in the Haku... of all of them, there are 3 I like, with one reign supreme.
I always give a RDA a fair shake... but if the vape isn't close or better than what I use currently...there is no sense to keep it. And I truly don't mind giving stuff I know I am not using to those that are interested in it...especially a clone.
I would like a NarDa...probably buy a Clone...but thing is... I only have 3 squonks, 2 already occupied by Haku's, well all 3 are, but 1 Haku is a Clone lol.
Ah in a month or two I should finally have a 4th mod... 67 Neo3 Mosfet
1 persons favorite rda/build is anothers OMG WTF kind of PUKE SHIT you vaping
haku is a little to Airy
Mulciber i use with the single airflow ring at the bottom ,
Everything is subjective to each user , Hussar clones i prefer the hussar RDTA to the Hussar V1.0
Sent from my ONEPLUS A3003 using Tapatalk
If Hcigar would have made the Magic squonk a mosfet instead of a mech I would have definitely bought one, at least they finally started using silicone bottles.
Ah. Guess I would need to contact someone in one of these Tech Hubs to figure how much it can be printed out for then. If it's not too much then shipping from like Parkersburg ought not be bad either. Then, I'd need to buy the "guts" to put into it, prolly get them via FD's. Hm, I'll keep that tucked away for later.
Mooch discusses changes to his tables and battery comparisons. A must watch show.
18650, 20650, 20700, 21700... Think I will just stick with 18650 for another year at least.
18650, 20650, 20700, 21700... Think I will just stick with 18650 for another year at least.
Neat. If i need that done, I'll toss one in a little box ship it to you with some of that funky cashie stuff, or a money order. I may eventually get around to going to local library, set myself to learning 'lectronics. Hell, I've helped her grandfather rewire our house once and it surpassed code, scared the inspector. "How long that take a contractor to do?" "Took us two hours inside, fifteen minutes outside."
Keep me up on the clowns in WV book. I love creepy shit. Sounds like my style.
Sent from my Nexus 6P using Tapatalk
All right. If you see something in Horror genre listed under the name o' Ward Preston you might want to catch it. Not saying I'll have anything finished and pushed through the slug hell that is getting published all too fire quick, but I've decided upon that as a Horror pseudonym. Comes from two of my three or four grandpas.
As of now it's in the milling it over a little to get the initial seed scene written. Once I've got that, if I can hook any reader in three paragraphs, will plow forward with tackling the outline and plotting. Kind of at an impasse as to figuring a protagonist for it, consider it'll be Billy Kincaid type of dark, might even get pushed as porn if I'm not careful. Thinking maybe some biker dude gets wind of the going downs, he's running with BACA so the bikers go after the clowns. Not sure yet though, as I say still milling it out. Poop, need to write that down ... *copy, cut, paste*.
Can you summarize? Sounds like 18650s are going the Dodo way when you word your view as such.
They made silicone bottles for the VTinbox , there Clear bottles i bought a box full , there really are a lot better than the the white harder ones,
Sent from my ONEPLUS A3003 using Tapatalk
He promised intenser sparks.
That was me wanting to give it a go.
Naah 18650's are not going away for at least several years.
Too many other things use them.
And I have enough 18650 mods to last the rest of my life most likely...
But buy new mods and batteries that cost 2X as much if you want.
They will last up to 25% or so longer in some cases with some batteries.
Or use adapters which must be moved from battery to battery as you change batteries.
For me too much trouble and expense for too little gain.
Just the way I roll.
Roll on as however suits you.
Mod- Svf derlin, Cloak v2 and Mölly
Atty- Entheon, Hadaly and B2k
Bottle. Cappy v4 kompact and cappy R(basicly any cappy I've tried)
Sent from my SM-G955U using Tapatalk
Atty- Entheon, Hadaly and B2k
Bottle. Cappy v4 kompact and cappy R(basicly any cappy I've tried)
Sent from my SM-G955U using Tapatalk
Mods: 67 Occultus & Hexohm V3
RDAs: CSMNT, Haku, B2K, Wasp
RDTA: Gaia
Bottle: DaOne
RDAs: CSMNT, Haku, B2K, Wasp
RDTA: Gaia
Bottle: DaOne
Looks like there are two versions of the hcigar mech, possibly one newer? one uses the new bottles you are talking about and the same as the inbox (been meaning to pick some up) but possibly a newer version that uses what looks like regular non-proprietary silicone
https://www.fasttech.com/products/0/10029699/9624576-authentic-hcigar-magic-mod-replacement-squonk
Being a mech and having to remove a bunch of screws just to see the contacts would be a pita to tear down and clean though, would have made more sense for them to do a mosfet IMO the way the mod looks with the door off.
Got this tip to work on the haku put bigger oring for snug fit and put this coil in credit to @So619Cal and im enjoying it quite well
Sent from my SM-G950U using Tapatalk
Ah what did that Ohm out to? I remember saying I had no idea... I mean I could plug it in...but honestly I'd think it would be about .19 - .24
If you want me to whip up some more of the .27ish coils I can...will be at least a week out on you getting them... Can crank out those simple fused pretty easily.
They must have figured out what it was used for.
Amazon sells no vape stuff.
Not officially anyway.
A 10 strip bag should last me 1-2 months.
Fast Tech has 2 10 strip bags for under $8.
COTTON LABO Organic Cotton Large Puff, 0.23 Pound https://www.amazon.com/dp/B000TCEXOS/ref=cm_sw_r_cp_apa_gTVpAbENB1X4N
Just sayin'
Sent from my SAMSUNG-SM-N910A using Tapatalk
That flave tip has really transformed the haku funny how something so simple can completely change a atty
Sent from my SM-G950U using Tapatalk
I’ve been using rayon for so long I think I should give some organic cotton a shot again.
Sent from my iPhone using Tapatalk Pro
A tip makes the Wasp so much better as well.
Use that to clean my dogs ears...Bought a huge bag of it, gave a bunch away...always had an odd taste to it for me...Thank you though.
That tip that I sent with the Flave is just a generic one from FastTech...
I use one of Wismecs 510s on one Haku and the CSMNT 510 one on the other and that same DT you have on the Clone Haku
I used nothing but Rayon for a long time and enjoyed it...then Bacon ruined it.
I'll order from one of the California Vape joints some more Bacon, but also try some other stuff on Amazon... might find a diamond in the rough.
yeah gave my package of KGD to the wife to use for makeup or whatever.
Lucy caused me to put aside my 1/3 box of Salon Coil Cotton I got at Sally over 2.5 years ago for $3.
Got the Cotton Bacon V2 monkey on my back now....
Got the Cotton Bacon V2 monkey on my back now....
Gbox 200 received from @Miller SM for review. I will be posted it up as soon as I spend some valuable time with it.
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
C'mon that was funny and you know it.
"Lord, I apologize, and be with the starvin' Pygmies in New Guinea. Amen"
You know, this ain't FarceCrook, you could expand on your laconic answer!
Back to the flave i go just cant find the sweet spot on the haku thought i did but nope
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
With that kind of money I'd buy a couple Vandy Vapes Mesh RDA's a couple Hellvape Dead Rabbit SQ's a couple of Oumier Wasp Nano's a Capo Sqounker Kit a VandyVape Pulse BF Squonk Kit and that Sigelei Fuchai 213 Squonk Kit as well and still have a fuck ton of money left over to go to Lake Tahoe and do nothing but relax for a few weeks.at Black Bear Lodge.
That explains it then.
I once clicked a link here on the forums that somehow opened a lady-boy website.So your mileage may vary.