Become a Patron!

SUBTANK WARS

RGBVape

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I think that's going to be my next acquisition.
It looks great with nice features.


Sent from my iPhone using Tapatalk
People have talked about it, Heather, but I don't believe anyone has it.
 

RGBVape

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I think I going to be the first


Sent from my iPhone using Tapatalk
Good luck. Haven't seen many reviews at all, and that scares me off a bit.
 

Istand

Member For 4 Years
Member For 3 Years
Member For 2 Years
Good luck. Haven't seen many reviews at all, and that scares me off a bit.
I suppose that everybody have so many that they don't want to buy one more.
Now I'm enjoying my zephyrus, Great flavor and clouds.


Sent from my iPhone using Tapatalk
 

MoFasterMo

Bronze Contributor
Member For 4 Years
Looks good on your device. Have you any experience with a Kanger Subtank to compare it to?
No, and I have friends that own them. I just never tried one, I was on the Atlantis band wagon.
Now that you've brought it up I'm going to have to go borrow one to try it.
 

TheVapingDevil

`Vape It All Up!!!!!!
VU Donator
Gold Contributor
Member For 4 Years
Vape Media
Did you ever do this?
Hey sorry for the delay. Life gets in the way of hobbies sometimes. I made up a Starre coil and it did fit into the beast base as expected. However it would not fit into the chimney. It felt slightly larger in diameter than the Atlantis coil. I tried a little pressure because there is a seal in the beast chimney but it would go. So the starre coils in the beast are a NO go my friend.

Sent from my Samsung Galaxy S5 Dumbphone
 

Heather

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
No, and I have friends that own them. I just never tried one, I was on the Atlantis band wagon.
Now that you've brought it up I'm going to have to go borrow one to try it.
Let us know what you think. I really like the idea but am scared to try it. It seems I have bought so many tanks lately. I did get the beast and the ni200 coils, I LOVE IT! Thanks for the advise.
 

RGBVape

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Hey sorry for the delay. Life gets in the way of hobbies sometimes. I made up a Starre coil and it did fit into the beast base as expected. However it would not fit into the chimney. It felt slightly larger in diameter than the Atlantis coil. I tried a little pressure because there is a seal in the beast chimney but it would go. So the starre coils in the beast are a NO go my friend.

Sent from my Samsung Galaxy S5 Dumbphone
There is no innovation without the risk of failure. It was worth a shot, right?

How do you like the top fill? Have you only used needle applicators or have you successfully filled it with drip applicators as well? The juice channeks seems like it would handle either method.
 

Heather

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
There is no innovation without the risk of failure. It was worth a shot, right?

How do you like the top fill? Have you only used needle applicators or have you successfully filled it with drip applicators as well? The juice channeks seems like it would handle either method.
I fill it with the dropper. At first I made a mess but now have gotten the hang of it. You can actually fit in down in a little bit. I really like the top fill.
 

RGBVape

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I fill it with the dropper. At first I made a mess but now have gotten the hang of it. You can actually fit in down in a little bit. I really like the top fill.
Good to know! Thank you.
 

TheVapingDevil

`Vape It All Up!!!!!!
VU Donator
Gold Contributor
Member For 4 Years
Vape Media
There is no innovation without the risk of failure. It was worth a shot, right?

How do you like the top fill? Have you only used needle applicators or have you successfully filled it with drip applicators as well? The juice channeks seems like it would handle either method.
I use syringes to fill since I have them from my DIY. But the beast opening is so big any dropper would work. Honestly the top fill is nice but not much faster cause u still have unscrew it. Just as fast if bottom fill. The lemo 2 top fill has a moving ring. That's cool feature

Sent from my Samsung Galaxy S5 Dumbphone
 

RGBVape

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I use syringes to fill since I have them from my DIY. But the beast opening is so big any dropper would work. Honestly the top fill is nice but not much faster cause u still have unscrew it. Just as fast if bottom fill. The lemo 2 top fill has a moving ring. That's cool feature

Sent from my Samsung Galaxy S5 Dumbphone
I'm less interested in the top fill and more interested in vapor and flavor, durability and lifespan of the coils, and other performance issues.
 

harpo1

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I think I going to be the first


Sent from my iPhone using Tapatalk
I received mine a couple days ago but haven't used it yet. The air holes are identical in size to the Arctic tank. Top fill only.
 

harpo1

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
The SauceCode tank is really nice. Great flavor and easy to fill. It has large fill channels so you can fill it with pretty much any tip you like. I'm still trying to figure out the juice control system since it didn't come with any instructions. The only down side so far is the drip tip is so damn short your lips touch the top cap when you vape. I'm not sure what they were thinking there. I just put an arctic drip tip on it and all is well.
 

Istand

Member For 4 Years
Member For 3 Years
Member For 2 Years
The SauceCode tank is really nice. Great flavor and easy to fill. It has large fill channels so you can fill it with pretty much any tip you like. I'm still trying to figure out the juice control system since it didn't come with any instructions. The only down side so far is the drip tip is so damn short your lips touch the top cap when you vape. I'm not sure what they were thinking there. I just put an arctic drip tip on it and all is well.
Do you know if the Zephyrus rda will work in the Saucecode? Or in which sub ohm tank can I be able to use it.


Sent from my iPhone using Tapatalk
 

harpo1

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Do you know if the Zephyrus rda will work in the Saucecode? Or in which sub ohm tank can I be able to use it.


Sent from my iPhone using Tapatalk
Here's what VaporDNA's website says:

True Coil Compatibility - The Project Sub-Ohm™ SauceCode™ is also directly compatible with the Aspire Atlantis Coil Heads, Sense Herakles Coil Heads as well as the Eleaf MELO Coil Heads, giving users the ability to use these coil heads within the SauceCode™ system. This compatibility also can be used in opposite, allowing for the advanced dual wicking and SauceCode™ BXDC heads to be utilized within the Aspire Atlantis and MELO ecosystems (Sense Herakles does not accept BXDC coils from our testing). The SauceCode™ RBA Head can also be used in the Aspire Atlantis, and MELO systems as well.

The Project Sub-Ohm™ SauceCode™ can now be used in conjunction with temperature control devices utilizing the Herakles Sub-Ohm Nickle Replacement Coils!

I don't own any of these so I can't verfiy.
 

TheVapingDevil

`Vape It All Up!!!!!!
VU Donator
Gold Contributor
Member For 4 Years
Vape Media
Anyone yet try out the VapeOnly vAir-T Atlantis Nickel OCC. For the price of 10.00 for 5, cant go wrong unles they totally SUCK. Just ordered some and I see now VS finally has the Atlantis nickle coils back in stock. Good thing, I have been nursing my last one now for over a week.
 

Mert1975

Member For 4 Years
I have been testing one for a week or so Devil flavor is there but I can't get any heat even at 50 watts and 560°. I plan on revisiting these when my IPV3 LI gets here.

Sent from my Venue 8 3830 using Tapatalk
 

TheVapingDevil

`Vape It All Up!!!!!!
VU Donator
Gold Contributor
Member For 4 Years
Vape Media
I have been testing one for a week or so Devil flavor is there but I can't get any heat even at 50 watts and 560°. I plan on revisiting these when my IPV3 LI gets here.

Sent from my Venue 8 3830 using Tapatalk
Having flavor is good but damn with that kind of power you would think it would be sizzling. Then again .25 Nickle is more than I have ever seen. The VS coils are .14 and there is a lot of wire in that coil housing. So maybe it needs to be really cranked up. That IVP3 LI does look nice. Been eyeing it myself
 

Mert1975

Member For 4 Years
I have the first edition Heatvape Invader so who knows if its working right Busardo tested it and said it was working as it should so I dunno. I got my IPV3 LI at Wakeandvape for $85 shipped on special its $99 now.

Sent from my Venue 8 3830 using Tapatalk
 

TheVapingDevil

`Vape It All Up!!!!!!
VU Donator
Gold Contributor
Member For 4 Years
Vape Media
I'm less interested in the top fill and more interested in vapor and flavor, durability and lifespan of the coils, and other performance issues.
Broke Out MY Starre Tank Last night. Really loving this. It's been on shelf since the beast arrived but it's back and Def a great vapor/flavor producer.

Sent from my Samsung Galaxy S5 Dumbphone
 

TheVapingDevil

`Vape It All Up!!!!!!
VU Donator
Gold Contributor
Member For 4 Years
Vape Media
Does your Starre squeeze juice out of where it screws together when you fill it?
IT use to but I found a quick and easy fix to this. After I fill it, take a q-tip and run it around the ledge when it mounts together. I found juice pools in there and will leak out when reattaching it to the base. its messy and pisses me off. The Q-tip thing is kinda PITA but it works for me... hahah
 

MarkS

Gold Contributor
Member For 5 Years
Anyone yet try out the VapeOnly vAir-T Atlantis Nickel OCC. For the price of 10.00 for 5, cant go wrong unles they totally SUCK. Just ordered some and I see now VS finally has the Atlantis nickle coils back in stock. Good thing, I have been nursing my last one now for over a week.
I should have some arriving today to put in my Atlantis 2.
 

RGBVape

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Left my SMOK TCT in my car like all my other tanks to test out, and it leaked like a bitch. So that sucks
That sucks. Was it through the airholes or along the seam of the base? I tend to see both wirh my Kanger, although the airflow holes seem to be the worst offender, especially since I rewick the coils.
 

RGBVape

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
IT use to but I found a quick and easy fix to this. After I fill it, take a q-tip and run it around the ledge when it mounts together. I found juice pools in there and will leak out when reattaching it to the base. its messy and pisses me off. The Q-tip thing is kinda PITA but it works for me... hahah
That is annoying.
 

Terminalintel

Member For 4 Years
That takes that tank off my list, then. I don't need another leaker like that in my stable.

Well it's also like 110 degrees in my car. The arctic is the only one that has been able to hold up to that. Otherwise I've had it on its side on and on my SX all night the past few nights with no leaking. That's why I'm surprised and a little saddened. It's going back in but I'll report back and see if it does it again.
 

Terminalintel

Member For 4 Years
Just bit the bullet and ordered a Silo Beast. I'm looking forward to it. Hope it is as good as advertised!
A

Also doing this soon. Had my eye on it for too long. Make sure you check the insulation on the top portion. If it's all white you have the upgraded version, if it's not, it's an older model.
 

rudogg760

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Just bit the bullet and ordered a Silo Beast. I'm looking forward to it. Hope it is as good as advertised!
When thos coils die i recommend the ijust 2 coils. Has become my all day carry
e2381d2714b038f9f9ba7fd9627d5d11.jpg


Sent from my LG-D851 using Tapatalk
 

rudogg760

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Even better than the V2 coils?
On a mech or unregulated device i like the ijust 2 .3 ohm coils better. I havent tried it really on my regulated box because it only goes up to 60 watts and that's not enough for the coils, either of them.

Sent from my LG-D851 using Tapatalk
 

Terminalintel

Member For 4 Years
RGB the second part of my day it did not leak out the openings. So in 110 degrees in a car it will leak, which is normal for juice to become thin and leak out of most tanks. Took temperature up to 90 degrees it will not leak out on you. Even left on its side
 

Terminalintel

Member For 4 Years
Also in my attic I changed juices to the GWAR bloodbath juice by MTBV, totally changed the vape. I guess the juice I had in there was too high of nic or not steeped enough. Oh well, it's better now
 

Heather

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
A

Also doing this soon. Had my eye on it for too long. Make sure you check the insulation on the top portion. If it's all white you have the upgraded version, if it's not, it's an older model.
Mine is clear. That means the older version?
 

MarkS

Gold Contributor
Member For 5 Years
Def would be interested to hear another view on these.....
VapeOnly vAir-T Atlantis Nickel OCC:
Ok... TC works ok. Have juice holes wide open. IPV4 reads 0.31 ohms. Jouls set at 40 and temp at 398 degrees Fahrenheit. Atlantis 2 Tank chamber air intake wide open an tip air intake half open. First impression is that it's a little more restrictive on air flow over the Atlantis 2 0.3 ohm coils which is understandable since the coil air intake is half of the Atlantis 2 coil. Flavor is good. So my verdict is I will continue to purchase because price verses performance is great. I hope they come out with a lower resistance and change the coil base to have 4 holes or make the two larger.

No matter where you go, take your Vape!
 

cascadian

Bronze Contributor
Member For 4 Years
In my quest to try every damn one... I just ordered two more sub ohm tanks. The T-VCT Sub-Ohm Tank by OBS and the Typhoon Tank by The Council of Vapor. I hadn't even heard of the T-VCT before. Anybody seen one in the wild yet. Looks pretty interesting besides the alien head engraving.
 

Terminalintel

Member For 4 Years
In my quest to try every damn one... I just ordered two more sub ohm tanks. The T-VCT Sub-Ohm Tank by OBS and the Typhoon Tank by The Council of Vapor. I hadn't even heard of the T-VCT before. Anybody seen one in the wild yet. Looks pretty interesting besides the alien head engraving.

All the tanks/mods I have here in lincoln nobody has even touched. A few have heard of them but they usually run the run-of-the-mill tanks that everyone has heard of
 
Last edited:

RGBVape

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
RGB the second part of my day it did not leak out the openings. So in 110 degrees in a car it will leak, which is normal for juice to become thin and leak out of most tanks. Took temperature up to 90 degrees it will not leak out on you. Even left on its side
That's good news for you!
 

RGBVape

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
On a mech or unregulated device i like the ijust 2 .3 ohm coils better. I havent tried it really on my regulated box because it only goes up to 60 watts and that's not enough for the coils, either of them.

Sent from my LG-D851 using Tapatalk
Well, my IPV2 Mini only hits 70W, so hope that's ok.
 
Last edited:
Okay so even though we're not far out from the next gen of sub ohm tanks, like the current aren't good enough, thought I'd put in what I know about what's coming. The aspire triton will be able to use v2 Atlantis coils a shop owner told me, the new smok tank is crazy and has these like, triple and quad coil things. The new Starre is really just an improved design because it already can use the Atlantis, Herakles, smok, sega rba deck maybe, 100%, the Melo deck, and the ni200 versions of said coils. The new one will come with a couple nickel coils and a .25/.5 like regular like before. Top fill, but who cares about that. It's like temp control. It's a fad, I got the snow wolf just for that and I traded it for a dual parallel and dual series plus some little stuff. I got an IPv4 for $60 just so I don't waste the nickel Atlantis coils I bought. There's another version of them and they can hit 80w, with tc function. 5 pack was only $10. It's actually Aspire but under a name they use I guess. Here's the only place I've seen them and I kicked myself for buying the vaporshark ones, but whatever. I will use these because of the price and high wattage, but with the normal coils I use a mech all day. I prefer mech any time unless I have to use vv or tc obviously. I got my Starre when it hit the shops immediately, and I've never broken the tank and I've dropped it a lot haha. Only on my 3rd coil because FreeMax even says they'll last a month. I got 5 weeks out of my first .25 until it tasted bad. Don't use muffin man in it though, it fucks up the coils. Oh well. Personally I say it's the best one available, and the new one has improvements to the tank itself, even more airflow and tc coils. I like a cool vape sometimes so I'll keep the IPv4 but I'm over it as a really big deal. I got the ni200 kanger coils but only because someone sold me a $15 mini. Worth it. I enjoy that for flavor and the cool vape but nothing will beat the Starre for now. The new smok looks nice but if you can't use other coils I won't touch it. At least the kanger subs will take the sigelei elite tank coils. That ni200 can do 70w. I prefer that tank but mine was faulty and I got the mini right after, so essentially the same. Airflow is about equal if using the v2 mini, but the sig drip tip is huge. It won't fit on anything I can find. Anyways, Starre or nada for me considering I've only needed to buy one coil since it first came out, like I got it that first day and didn't touch my Herakles again. The mini is my backup and I traded basically nothing for a spare. I enjoy the flavor.

sweet-vapes.com/clearomizers-cartomizers-tanks/aspire/aspire-coils/atlantis-ni-200-nickel-organic-cotton-coils.html
 
hahahah I hear ya man. So tough to keep up with it all. A month ago top fill was no where on the open market. Today everything is top fill as an example of how fast shit is moving. Regarding your question on Starre coils in the beast. I dont have any Starre coils to test for an absolute answer but I can state the following facts.
Both have the same base threading so the Atlantis coil def fits the starre and gives a great vape.
The Starre will not fit the Atlantis only because the top of the coil has to thread into the lower part of the Atlantis chimney so make it fit. So thats out.
The Atlantis fits the beast and WOW is that amazing especially with Nickle coils.
The Beast does not need threading at the top of the coil.
Having said all that, I am fairly certain that the Starre coils will fit but I am not 100% certain. The above facts seem to indicate they will.
I have some Starre pc parts of coils laying around. I can put one together tonight and see if they do fit.....
I bet the Starre DVC coils in the beast would be KILLER ahahahha

Enjoy

Top fill isn't new, things go in waves guys. The new Starre will still be the best. With its ability to use like 5 other brands of coils there is no reason not to have it. And the pro has a better design with more airflow, plus it has its own ni200 since that's the stupid fad now. I got a snow wolf pretty quick but for a good deal so I had the tc option. Totally over it, traded it for dual series and a dual parallel set of boxes, and a couple little things. I got an IPv4 for $60 the day before the trade just for the price so I have the tc option but I want my full mech box all day, no mosfets just thick wire and high amp button. Best boxes I've had, though I love the sig150. It's a solid mod. Sold it so my friend would have a good setup instead of the crap he had. Here's a link for cheap tc coils made for the Atlantis by Atlantis but under another name, 5 for $10. I'm pissed I got the vaporshark ones but I have plenty of coils now

sweet-vapes.com/clearomizers-cartomizers-tanks/aspire/aspire-coils/atlantis-ni-200-nickel-organic-cotton-coils.html
 

VU Sponsors

Top