SUBTANK WARS

[MercuryVaper]

Thanks Devil, yea I knew that it is a one piece section, I was just hoping they may offer a replacement of that section in the future, in the event of a disaster. Plus it would make for a cool look having say, a SS center section with black top and bottom, or, vice versa.
Are your 510 threads black? Any conductivity issues you can detect? This tank and rba can be had for 40 bucks, so I may jump on it. It's the same price as the crown with rba, but this has, AN ALIEN.....

 

[TheVapingDevil]

Thanks Devil, yea I knew that it is a one piece section, I was just hoping they may offer a replacement of that section in the future, in the event of a disaster. Plus it would make for a cool look having say, a SS center section with black top and bottom, or, vice versa.
Are your 510 threads black? Any conductivity issues you can detect? This tank and rba can be had for 40 bucks, so I may jump on it. It's the same price as the crown with rba, but this has, AN ALIEN.....

Hey Mercury
That's a freaking cool idea if you could mix n match them but I don't think so. Let's hope for V2 lolol
Yes my threads are black and I have to say I get better connection with this tank on my sig than any others. Almost seems like it's a conductive coating. Mine reads dead on every time.
Oh yea the RBA has a little alien head on it too. I'm cranking a .1 nickle build on mine today n loving the flavor

Sent from my Samsung Galaxy S5 Dumbphone

 

[TheVapingDevil]

Hey Mercury
That's a freaking cool idea if you could mix n match them but I don't think so. Let's hope for V2 lolol
Yes my threads are black and I have to say I get better connection with this tank on my sig than any others. Almost seems like it's a conductive coating. Mine reads dead on every time.
Oh yea the RBA has a little alien head on it too. I'm cranking a .1 nickle build on mine today n loving the flavor

Sent from my Samsung Galaxy S5 Dumbphone

Here's a pic on top of sig

Sent from my Samsung Galaxy S5 Dumbphone

 

[MercuryVaper]

Here's a pic on top of sig

Sent from my Samsung Galaxy S5 Dumbphone

Oh man that looks good, and a bonus ALIEN HEAD on the rba section. What could be better. I have the Sig 75tc also, the silver one, but I covered the doors in some black carbon fiber I had laying around. I also put the black orings on the Kanger. Looks much better lol.

 

[Slurve]

I ordered an authentic subtank mini base on fasttech because my airflow has become hard to turn. I use the middle air hole because I think the flavor is best there as opposed to the cyclops hole. On the one from fasttech that hole is smaller and it whistles which will drive me nuts. Everything else appears the same. Was I sent a clone or is this the v2 or something? Has anyone else had a whistling kanger subtank mini?

Sent from my LG-H810 using Tapatalk

 

[MercuryVaper]

I ordered an authentic subtank mini base on fasttech because my airflow has become hard to turn. I use the middle air hole because I think the flavor is best there as opposed to the cyclops hole. On the one from fasttech that hole is smaller and it whistles which will drive me nuts. Everything else appears the same. Was I sent a clone or is this the v2 or something? Has anyone else had a whistling kanger subtank mini?

Sent from my LG-H810 using Tapatalk

If you ordered authentic, it should be just that. Unless FT got duped, I guess it's possible. I just pulled on my v2 stm at the smallest and middle hole, no whistle.

 

[Nailz]

The OBS was in the mail box waiting for me

Won't have time to mess with the RBA head till tomorrow, so just filled it up with the 0.50ohm coil that was already installed in it, letting it sit for a bit to prime.

 

[TheVapingDevil]

Oh man that looks good, and a bonus ALIEN HEAD on the rba section. What could be better. I have the Sig 75tc also, the silver one, but I covered the doors in some black carbon fiber I had laying around. I also put the black orings on the Kanger. Looks much better lol.

That's super sweeeeet!

Sent from my Samsung Galaxy S5 Dumbphone

 

[oneslow22]

I got 35 feet of 26g of ti from unkamen. Shipped same day and should be here tomorrow. I ended up ordering my mod from vapor lips. Dave is awesome. I'm waiting on that to arrive. The boxer never appealed to me

Sent from my Samsung Galaxy S5 Dumbphone

 

[Daintanee]

Ahhh shitz! I'm gonna do it, but I just don't know which way to go. I read fantastic reviews on the billow v2 as well where it rocked on a single 1ohm coil as long as you plug the opposite juice hole with cotton. Any advice? If not I am left to the way I make decisions when I just don't know. I flip a quarter. But the alien is way cool.

 

[Markw4mms]

Go with the Alien. Resistance is futile!

 

[TheVapingDevil]

Ahhh shitz! I'm gonna do it, but I just don't know which way to go. I read fantastic reviews on the billow v2 as well where it rocked on a single 1ohm coil as long as you plug the opposite juice hole with cotton. Any advice? If not I am left to the way I make decisions when I just don't know. I flip a quarter. But the alien is way cool.

I have both if that helps lolol. I didn't know you can plug the other coil side. I may try that but I do love the dual coil setup on it. It's great for ti and with little patience ni200 as well. I flip flop between the two honestly and depending on what I'm going for is what I grab. Either one us great and can't go wrong either way. I'd get both lolol but if I had to decide it would be the billows but only very slight edge

Sent from my Samsung Galaxy S5 Dumbphone

 

[Daintanee]

Another trek fan!

 

[Markw4mms]

Another trek fan!

You know it!

 

[Daintanee]

Grrr! I figure either is better than what I have. Hmmm you guy's votes just cancelled one another out. Let's see what the quarter has to say.

 

[Markw4mms]

Well I don't have a Billow v2, so I can't say how great it is. I have heard a lot of good said about it here though.

 

[MercuryVaper]

Grrr! I figure either is better than what I have. Hmmm you guy's votes just cancelled one another out. Let's see what the quarter has to say.

Drum roll....And the quarter says?

 

[TheVapingDevil]

Get both you know u want too lolol. Sorry that's the devil in me

Sent from my Samsung Galaxy S5 Dumbphone

 

[MercuryVaper]

My favorite all day tank has been the aqua v2. single or dual coils. Does that help any lol? Oh, and like 12 bucks at FT...

 

[Daintanee]

I heard the aqua v2 was great also and no that don't help, now I have more choices.

Get them all, too funny. Before you posted I was going to call you a real devil.
Before more tanks than one I believe I need a new mod silly.

The quarter said alien. But I'm still undecided. Arrgg, the pressure!!!

 

[StanM]

Just do it

 

[Daintanee]

The only thing I don't like about the alien is the tiny top fill. But, I think I am gonna do it!!!

 

[TheVapingDevil]

The only thing I don't like about the alien is the tiny top fill. But, I think I am gonna do it!!!

I fill with a 14g syringe needle and it hot plenty if room. If using a dropper that might be tight

Sent from my Samsung Galaxy S5 Dumbphone

 

[StanM]

It's not that tiny at all

 

[Daintanee]

Ok ok I'm doing it!!!

 

[TheVapingDevil]

Ok ok I'm doing it!!!

You will be so happy.
Now I'm done recommending stuff lolol. Least for today

Sent from my Samsung Galaxy S5 Dumbphone

 

[MercuryVaper]

The quarter said alien. But I'm still undecided. Arrgg, the pressure!!!

Never Ever dispute the quarter. It has spoken, you are compelled to follow it's commands.

 

[Nailz]

If want to do single coil, then would stick to a atty that is made for single coil, rather than try making a dual coil atty work for single coil.

Been vaping with the T-VCT since last night and really liking it so far, not got the RBA out yet, been using the 0.50ohm coil at 40 watts and getting good flavor and vapor, it is not a cloud machine, but I am more into flavor than clouds, at 40 watts the drip tip gets a little warm, but nothing my lips can't handle.

So far I am very happy I got the T-VCT, thanks to @TheVapingDevil it does live up to the hype you have given it

 

[Stepinrazor]

The Freemax Starre Pro is a beast in both the flavour and vapour departments.

The machining is top notch and the top fill is the best by far of all the top fill tanks I have tried. I can't compare it to the Crown, but the fact that the Freemax can handle a range of different coils makes it a winner for me.

 

[MercuryVaper]

I wonder if they revise the juice control system. People seem to have issue with it. They need to put a detent on it when it's open or closed.

 

[Mattp169]

well the freemax.maganus DVC ni200 coils are by far my favorite in terms of flavor. bt I have herd many have issues with the PRO and its top fill, the original one is bottom fill and I have no issues with mine except the airflow is massive for me

and the only rda decks I know of for these is the segatank or anyvape, which I have no idea how flavor production is on these versus say those DVC ni200 coils

 

[Stepinrazor]

Regarding the Freemax Pro: The top fill works flawlessly once you understand it only goes into the ON position screwing the top cap back on then switching it to immediately to the OFF position once tightened down.

Flavour control is better than the original, and the top fill function makes it a breeze to fill. It even primes the coil. And yes the Anyvape Sega Tank RBA fits and gives good flavour, different to the Ni200 coils which are a cooler Vape.

 

[Nailz]

Just did my 1st builds on the T-VCT RBA base, did a ti build 1st, but my evic kept hitting temp control all the time (same problem had with all my TC builds, so think that is down to the evic), so ripped that out and did a kanthal build, 26 gauge 2.5mm rod coming out at 0.64ohms.

The deck is tiny, but still didn't find it hard to build on and easy to catch the wire under the deck screws, did have problems snapping the top of the RBA head on, but that was due to the cotton going down in the channel where the head clicks into, so found it easy to put the cotton up, snap top on, then clip cotton level with the top of the head and push the cotton down to cover the juice holes.

Got the juice control fully open, airflow quarter open as MTL hitting, vaping at 30 watts and wicking is keeping up well, even with chain vaping, did try 35 watts, but got a tinge of burning, so went back down to 30 watts, flavor and vapor really good, and so far, no signs of any leaking.

Been stuck on my kanger subtank mini's with the RBA heads since they came out, but the OBS has knocked them off my top spot now.

 

[TheVapingDevil]

Just did my 1st builds on the T-VCT RBA base, did a ti build 1st, but my evic kept hitting temp control all the time (same problem had with all my TC builds, so think that is down to the evic), so ripped that out and did a kanthal build, 26 gauge 2.5mm rod coming out at 0.64ohms.

The deck is tiny, but still didn't find it hard to build on and easy to catch the wire under the deck screws, did have problems snapping the top of the RBA head on, but that was due to the cotton going down in the channel where the head clicks into, so found it easy to put the cotton up, snap top on, then clip cotton level with the top of the head and push the cotton down to cover the juice holes.

Got the juice control fully open, airflow quarter open as MTL hitting, vaping at 30 watts and wicking is keeping up well, even with chain vaping, did try 35 watts, but got a tinge of burning, so went back down to 30 watts, flavor and vapor really good, and so far, no signs of any leaking.

Been stuck on my kanger subtank mini's with the RBA heads since they came out, but the OBS has knocked them off my top spot now.

So glad to hear you are having positive results with this. I'm loving mine

Sent from my Samsung Galaxy S5 Dumbphone

 

[Daintanee]

Just did my 1st builds on the T-VCT RBA base, did a ti build 1st, but my evic kept hitting temp control all the time (same problem had with all my TC builds, so think that is down to the evic), so ripped that out and did a kanthal build, 26 gauge 2.5mm rod coming out at 0.64ohms.

The deck is tiny, but still didn't find it hard to build on and easy to catch the wire under the deck screws, did have problems snapping the top of the RBA head on, but that was due to the cotton going down in the channel where the head clicks into, so found it easy to put the cotton up, snap top on, then clip cotton level with the top of the head and push the cotton down to cover the juice holes.

Got the juice control fully open, airflow quarter open as MTL hitting, vaping at 30 watts and wicking is keeping up well, even with chain vaping, did try 35 watts, but got a tinge of burning, so went back down to 30 watts, flavor and vapor really good, and so far, no signs of any leaking.

Been stuck on my kanger subtank mini's with the RBA heads since they came out, but the OBS has knocked them off my top spot now.

Oh Joy!!! I'm so happy with you guys helping me decide. I'll be oh so happy to move on up from my subtank mini! Yee doggy!

 

[TheVapingDevil]

I'm having a horrible vape gear day. Both billows and vct are giving me a hard time. Neither want to work right. Must be a case of the Mondays. But I threw in a new ni200 onto my silo beast and finally a good flavorful vape. I guess it is a good idea to have several options available lololol

Sent from my Samsung Galaxy S5 Dumbphone

 

[Daintanee]

Well that just stinks! Sorry to hear about that. That's what I keep my rda's around for....emergencies!!!

 

[TheVapingDevil]

Well that just stinks! Sorry to hear about that. That's what I keep my rda's around for....emergencies!!!

Thats why we keep several devices available lolol

Sent from my Samsung Galaxy S5 Dumbphone

 

[Nailz]

Right next to me now, I have subtank mini, t-vct, lemo v2 and now the billow v2, so think I am covered if one or 2 go wrong

Few re-fills done on the t-vct and not single leak from it, really liking this tank, can see a silver one in my near future

 

[TheVapingDevil]

Right next to me now, I have subtank mini, t-vct, lemo v2 and now the billow v2, so think I am covered if one or 2 go wrong

Few re-fills done on the t-vct and not single leak from it, really liking this tank, can see a silver one in my near future

Not sure what's wrong with mine today but maybe they need a break. Been hitting them really hard last few days. My vct hasn't leaked either so real happy. But my gf has taken ownership of it so I guess I gotta get another one lolol.

Sent from my Samsung Galaxy S5 Dumbphone

 

[Nailz]

Not sure what's wrong with mine today but maybe they need a break. Been hitting them really hard last few days. My vct hasn't leaked either so real happy. But my gf has taken ownership of it so I guess I gotta get another one lolol.

Sent from my Samsung Galaxy S5 Dumbphone

I have whole weeks like that, where I seem to have to mess with stuff every day, luckily they don't happen to often now a days.

Think the Lemo v2 will be retired, now that is a tricky atty to not get leaking with, especially when it comes to filling it, so think a silver t-vct will replace that one.

 

[TheVapingDevil]

I have those days too bit luckily not frequently
The lemo 2 is great in concept but it is extremely finicky. Pisses me off more than anything so it sits idle now.

Sent from my Samsung Galaxy S5 Dumbphone

 

[Nailz]

I have those days too bit luckily not frequently
The lemo 2 is great in concept but it is extremely finicky. Pisses me off more than anything so it sits idle now.

Sent from my Samsung Galaxy S5 Dumbphone

Yea only had mine just over a week, and already had enough of it, thought I figured out the wicking so it wouldn't leak, but changed wick and did it the same way as before, but again it leaks from the air holes after filling, not wasting much more time on it, a lot easier things out there.

 

[TheVapingDevil]

I don't think I lasted a,week with mine. I can tolerate a lot of shit but leaks is not one if them. Thing hits great when it works but sucks most of the times

Sent from my Samsung Galaxy S5 Dumbphone

 

[TheVapingDevil]

Here's a question to all of us sub ohm freaks : freemax Starre pro with ni200 coils or the uwell crown with nickle? Pros /cons and why please .........

Sent from my Samsung Galaxy S5 Dumbphone

 

[MercuryVaper]

I don't think I lasted a,week with mine. I can tolerate a lot of shit but leaks is not one if them. Thing hits great when it works but sucks most of the times

Sent from my Samsung Galaxy S5 Dumbphone

So the OBS should no longer be on my ALIEN lust list? I don't have the crown or pro, but from all I've read watched and heard, the crown without question. Although the pro gets equally, if not slightly higher marks on flavor. Crown comes in black now btw. I'm down for tha crown (KottonMouth Kings)

 

[TheVapingDevil]

Oh I still love the alien tank but ever since the gf tried it I can only look at it now lolol. So instead of buying another my thought was to try the crown as I hear great things about it but also the starre has been on my radar. Lolol

Sent from my Samsung Galaxy S5 Dumbphone

 

[MercuryVaper]

Oh, I see, your talking about the Lemo 2 leaking. Never mind. ALIENS....

 

[TheVapingDevil]

Haha. Yea I can't stand the lemo 2 dye to leaks

Sent from my Samsung Galaxy S5 Dumbphone

 

[Mattp169]

the starre uses a Dual parrallel vertical coil

its awesome bets flavor of anything I have used. ONLY Issue. is if your running the airflow wide open, when the tank gets low on jucie in TC mode it will prematurely register dry coil because the juice has to get sucked UP the coil. I find with too much airflow theres not quit enough suction in the tank with max vg, close it down some and its fine. But you only have this issue with heavy vg and when the tank is like 85% empty