In my personal experience i almost always end up with "BOTH" regardless of how hard i try to only get 1.
Become a Patron!
The official VAPE MAIL!!!!!!! thread #2
- Thread starter Countrypami
- Start date
-
- Tags
- vape mail
Once you burn through them coils you can grab the Wotofo SMRT RPM2 coil kit for that pod.Okay, fess up? Who is the vape angel here. This was in my mailbox, ( so cute ) but no note and I can't even tell where it came from. I would like to thank you though. If you are wanting to stay anon I get that, I do that too at times. But could you maybe send me a pm so I can thank you at least?
I mean I can say it here of course, thank you to whoever you are.
View attachment 186702
Make sure you get the RPM2. Regular RPM’s won’t fit
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
hmmm and I JUST happen to have a bunch of those wotofo smart coils. Can't imagine who sent them to me. LOL I get what you are saying though, look for the RPM2 version. See, I didn't even know they had different types of that smart coil doo dad.
Last edited:
Yeah, the ones I sent you are PNP style.
They won’t work.
I’ll be home Wednesday. I think I have a spare I’ll send and a couple of the spare RPM2 pods also
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Hold off on sending me anything hon. Love you, but I may be out of here in a few weeks time.
Fingers crossed
I got a beautiful $hot yesterday from @crazydmnd here. Today, some more esco bars (not the cheapest way to vape, but so convenient and oh sooooo tasty), and some more billet bits and pieces
Today's vape mail... I'll be starting my first foray into DIY juice. Can't believe I waited this long. If I can score more nic base, I should be good to go for the vapepocalypse. Figure I probably am going to want a couple of liters of 100mg. Once I have that sorted out, my vaping will be future proof.
You’re going to like it.
It took a minute for me to get beyond the hex screws, such a horrible initial impression.
So go ahead and remove all 4, and use the slotted ones to save some aggravation.
Unless you don’t have one of those tiny screw drivers… then I’d really wait til you do… the hex grubs are not your friend.
Sent from my iPhone 12 Pro Max using Tapatalk
I have the slotted in mine as well. Rounded the hex wrench on the first try.
Sent from my SM-A716U using Tapatalk
I actually switched them out right away because I'd read your frustration over the hex's.
First build and initial impressions are positive. Easy to wick, no leaking perfect draw for me, and look ma no shorting!
I'm sure you saved me a headache with those screws so thanks!
I actually switched them out right away because I'd read your frustration over the hex's.
First build and initial impressions are positive. Easy to wick, no leaking perfect draw for me, and look ma no shorting!
I'm sure you saved me a headache with those screws so thanks!
It really is a great inexpensive RBA for the Boros.
I put the engraving towards the back
Sent from my iPhone 12 Pro Max using Tapatalk
Of course you didIt really is a great inexpensive RBA for the Boros.
I put the engraving towards the back
Sent from my iPhone 12 Pro Max using Tapatalk
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Purty! CongratsNot been buying much lately and things only going to get harder to get, so splashed out on some stabwood from England
View attachment 186782
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Being that we did sell that bit of property we had north of us, I went ahead and got this. Nothing real exciting but nice to have a little cushion. It got here yesterday.
I took out a small amount for testing, and yep. stuff is good. Wish I had known about them before actually. Nothing wrong with the LNW and the Heartland stuff I already have, but I can tell by the taste of the SNV blend I made up, this is better quality. I’m happy I was able to grab a liter.
I took out a small amount for testing, and yep. stuff is good. Wish I had known about them before actually. Nothing wrong with the LNW and the Heartland stuff I already have, but I can tell by the taste of the SNV blend I made up, this is better quality. I’m happy I was able to grab a liter.
I've got a gallon or two of it in my freezer. Pretty good stuff if you ask me.
Sent from my SM-A716U using Tapatalk
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
and just think those 3 little packages probably cost about as much as his mod! LOl I'm kidding, BUT I am quickly discovering the rabbit hole here with the wonderful world of the Billet. Not that I am buying them. Window shopping, just window shopping........................(giggle)Nothing as fancy as Mr. Gadgets but got some billet accessories today.
Sent from my SM-A716U using Tapatalk
My SXK DNA 60 has hit Cali. I might see it in a few days. Fingers crossed
It wasn't to bad I thought. Panels, screw set and brass drip tip was $45ish and the two drip tip nubs cost me $30. I wanted that red and white bad. Lol
Sent from my SM-A716U using Tapatalk
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Oh ya, not too bad at all
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
It sure does. Gorgeous
All i see is jack danielsI'm in love!
Sent from a Galaxy far far away
Sent from my SM-G781U using Tapatalk
That red...Adds a touch pizzazz to it lol.
Sent from my SM-A716U using Tapatalk
Sent from my SM-G781U using Tapatalk
Love em both. I don't like using a mission switch as much as a button, but they sure do look nice....... lolAdds a touch pizzazz to it lol.
Sent from my SM-A716U using Tapatalk
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Woot! Now, I can play too. What a great little device. I get it now.
If anything, try a simple 2.5mm 28g 6-8 wrap slightly spaced N80 coil at 13w with the second smallest positive pin without the chimney reducer.
My favorite build for the Snail/BB… well pretty much all I use for boros
Looks good!
Sent from my iPhone 12 Pro Max using Tapatalk
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Thanks! Yes, I plan on playing around with different builds a LOT!If anything, try a simple 2.5mm 28g 6-8 wrap slightly spaced N80 coil at 13w with the second smallest positive pin without the chimney reducer.
My favorite build for the Snail/BB… well pretty much all I use for boros
Looks good!
Sent from my iPhone 12 Pro Max using Tapatalk
I have the Mobb in there now. Oh! is there a trick to getting the battery out? Dang that's tough, already started to tear the wrap
Thanks! Yes, I plan on playing around with different builds a LOT!
I always put a piece of packaging tape on my batteries, even for the StashBox
Sorry for blurry pics…have the windows shut and only the 20w lamp on… migraine day and overly light sensitive eyes
Sent from my iPhone 12 Pro Max using Tapatalk
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Oh okay, I get it. Thank you, great idea. Plus we have TONS of packing tape right now.I always put a piece of packaging tape on my batteries, even for the StashBox
Sorry for blurry pics…have the windows shut and only the 20w lamp on… migraine day and overly light sensitive eyes
Sent from my iPhone 12 Pro Max using Tapatalk
Sorry about the migraine. I hope it passes quickly for you.
Yeah I took two photos to show how it’s not really noticeable til I push the tape out
Sent from my iPhone 12 Pro Max using Tapatalk
Wotofo Profile PS Dual Mesh RDA 28.5mm
First impressions...
I like it but I've always liked mesh RDAs.
Flavor is really good
Ramp up is instantaneous
Nice big juice well
I have it on a 21700 mech and it's a warm flavorful vape.
I've tried other mesh RDAs on mechs but haven't been happy with them. This one does a good job on a mech mod.
Sent from a Galaxy far far away
First impressions...
I like it but I've always liked mesh RDAs.
Flavor is really good
Ramp up is instantaneous
Nice big juice well
I have it on a 21700 mech and it's a warm flavorful vape.
I've tried other mesh RDAs on mechs but haven't been happy with them. This one does a good job on a mech mod.
Sent from a Galaxy far far away
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Works great @~Don~ I did end up seeing that there was a loose ribbon in the box but this tape works much better! Thank you!!!I always put a piece of packaging tape on my batteries, even for the StashBox
Sorry for blurry pics…have the windows shut and only the 20w lamp on… migraine day and overly light sensitive eyes
Sent from my iPhone 12 Pro Max using Tapatalk
