I'm gonna miss her!
Become a Patron!
The official VAPE MAIL!!!!!!! thread #2
- Thread starter Countrypami
- Start date
-
- Tags
- vape mail
nadalama
Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
I don't say this often, but that thing is SEXY. I know you'll love using it. What kind of atty are you putting on it?
Vapeology/billi billi order today. I love these guys, 3 days from order to my house, every time. I'm totally blaming @inganeer on this one, for posting the great price on the panels 
Of course I couldn't stop at that sooooooo
Mission panels, 2 hats, couple sets of screws, battery wraps, panel magnets, and a boro glass. They also threw in a t-shirt, but it is a V neck, so I will spare ya'll and the rest of the world of that
Not bad for 60 bucks shipped.
Of course I couldn't stop at that soooooooMission panels, 2 hats, couple sets of screws, battery wraps, panel magnets, and a boro glass. They also threw in a t-shirt, but it is a V neck, so I will spare ya'll and the rest of the world of that
Not bad for 60 bucks shipped.
Aw hell yeah........Picked up another hard to get Purge Mod.
Slam Piece Black Plague
Sent from a Galaxy far far away
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Today's vape mail. And so it begins..............lol Nah, not really. I mean I think I might see if I can find a different colored button, but I think that
would be all I can do for right now.
Clear panels. I like this look a lot
would be all I can do for right now.
Clear panels. I like this look a lot
Are you looking for a matchy button?
WELCOME TO THE DARKSIDE BABE
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Doesn't really need to match but I think the black button is throwing the look off. It could be any lighter color that would go with the teal/blue of billet itself. Pink, purple, white, blue, etc. any of those would look nicer than the black and I can find a drip tip to match it most likely. If I don't already have one
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Thank you my dear. LYF
I know I had a teal one and matching dt at one time, not sure if I still do. I'll look, you are welcome to them if I still have em.Doesn't really need to match but I think the black button is throwing the look off. It could be any lighter color that would go with the teal/blue of billet itself. Pink, purple, white, blue, etc. any of those would look nicer than the black and I can find a drip tip to match it most likely. If I don't already have one
I SHOULD HAVE STICKERS FOR THE INNERS, ILL CHECK WHEN I GET HOME AND IF SO..MAIL EM. I HAVE THE ADDY
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Oh goodness, that's so nice of you. Thank you. pm me though so I can see if there is something I can send in return. You guys know how I am. Same goes for you @bx10r You're a doll too.
Today DHL bring Haku Venna RDA. Steve Hasani of Haku send to me from Australia. I put it on squonker. Is very nice vape, si!!! 
Got a bargain sxk dna60 bb and a bargain atom mod. Atom was missing a screw. I made two new ones. They are not completely flush but I think I have enough material there I can remove and make it flush. The bb needs switches cleaned. A little 90% alcohol bath and should be good to go lol.
Sent from my SM-A716U using Tapatalk
Sent from my SM-A716U using Tapatalk
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Awesome! Got love bargains you can fix up!Got a bargain sxk dna60 bb and a bargain atom mod. Atom was missing a screw. I made two new ones. They are not completely flush but I think I have enough material there I can remove and make it flush. The bb needs switches cleaned. A little 90% alcohol bath and should be good to go lol.
Sent from my SM-A716U using Tapatalk
I was going to buy both of them for $60 but you were too fastGot a bargain sxk dna60 bb and a bargain atom mod. Atom was missing a screw. I made two new ones. They are not completely flush but I think I have enough material there I can remove and make it flush. The bb needs switches cleaned. A little 90% alcohol bath and should be good to go lol.
Sent from my SM-A716U using Tapatalk
. I passed on the purple one.
I haven't posted my vape Mail here in a while. Heres some of the stuff I've got recently.
Frosted Saga, Asgard, & Nightmares 25
I love series mechs now. So I much power and battery life. It's been fun building coils for series.
Both of these are awesome. The mod hits great, and the RDA is really good. It's a Valhalla V2 Mini (30mm).
I had to get another Saga and VV2M.
Got some new wraps for these see through mods:
I got a few rolls during Coil Clout's 40% off sale.
About my tenth Armageddon order this month:
That Mavaton X is pretty darn good cotton. I got it at Coil Clout. I like it so much,bI got more coming.
I love the original Drop RDA. Got a used gunmetal.
I ordered these Goons almost 8 months ago from Vapeyaya. They were only six bucks but I had to wait so long lol. I forgot I even ordered them and they just showed up.
I've had shitty clones and decent clones. These would be in the very decent catagory. I'm a big fan of the Goon series. My coils rock in Goon's. I'm glad I ordered them now for so cheap. They're $17 dollars now at Vapeyaya. I can't recommend that store though lol.
Frosted Saga, Asgard, & Nightmares 25
I love series mechs now. So I much power and battery life. It's been fun building coils for series.
Both of these are awesome. The mod hits great, and the RDA is really good. It's a Valhalla V2 Mini (30mm).
I had to get another Saga and VV2M
.
Got some new wraps for these see through mods:
I got a few rolls during Coil Clout's 40% off sale.
About my tenth Armageddon order this month:
That Mavaton X is pretty darn good cotton. I got it at Coil Clout. I like it so much,bI got more coming.
I love the original Drop RDA. Got a used gunmetal.
I ordered these Goons almost 8 months ago from Vapeyaya. They were only six bucks but I had to wait so long lol. I forgot I even ordered them and they just showed up.
I've had shitty clones and decent clones. These would be in the very decent catagory. I'm a big fan of the Goon series. My coils rock in Goon's. I'm glad I ordered them now for so cheap. They're $17 dollars now at Vapeyaya. I can't recommend that store though lol.
Where ya finding these deals...I was going to buy both of them for $60 but you were too fast. I passed on the purple one.
. I passed on the purple one.
Sent from my SM-G781U using Tapatalk
Yeah I'm not a purple person. Always wanted to try one of these and some of the other side fire mechs. Those suicide ones are way to hard for my arthritic hands. This atom is as easy as my brizo.I was going to buy both of them for $60 but you were too fast
Sent from my SM-A716U using Tapatalk
Yeah that fire bar is so stiff. I'm not sure if mine has loosened up or if I'm just getting used to it. I have Armageddon's Atocha and Lykan which are nicer to grasp. Their Siege is kind of of stiff like the Sui-Side.
E-cig classifieds on Reddit. Really good deals don't come around that often. You have to keep an eye on that sub if you want to score. For the most part, I look to see if there's any atomizers I might want.
Im in there ...selling and buying...same sig as here
Sent from my SM-G781U using Tapatalk
Ah nice! If you ever see a Black or Graphite Saga, can you get a hold of me please? I got into em late and all that's available is the see through ones. Its a long shot, but thought I'd ask..
This will look perfect on it...also sending a krv vaporesso euc coil bride(heat treated)Oh goodness, that's so nice of you. Thank you. pm me though so I can see if there is something I can send in return. You guys know how I am. Same goes for you @bx10r You're a doll too.
Sent from my SM-G781U using Tapatalk
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
OMG the ETU?? I wanted one of those so bad and no one has them in stock! You're a doll and stickers are way cute ty tyThis will look perfect on it...also sending a krv vaporesso euc coil bride(heat treated)
Sent from my SM-G781U using Tapatalk
That's a beauty! I may have to get on of those Facebook accounts as I never see those for sale anymore.Vape mail! After receiving my first VA Spade last week, I knew I'd need another. Also received a QP Nio kit.
Sent from my SM-G975U1 using Tapatalk
This came in today finally.
It reeks of Chinese Machine oil… and you could see they attempted to wash it for it still had rinsing residue still on the bridge.
It’s going through the 4th 10 minute Ultrasonic bath and 4th water change.
Watched Charles Rowes video of him building the collab version of this RBA and he raves about how clean and trusting he is of RJ… not the case here.
It was so bad, just smelling the pieces left that nasty taste in my sinuses and throat.
Going to build it with a simple 27g 2.5mm 6/7 wrap N80 coil, use the 2.5mm air flow, true shame there wasn’t a 2mm or 1.5mm.
I’ll edit this post later on how it vapes, and if 40 minutes and 4 water changes in the ultrasonic removes the machine oil stench
But as it stands, this thing is not worth the $205 price tag (I paid $84) and even then, initial impression is that it’s not worth $84
Again I’ll edit with my build impressions etc once this final bath finishes
Edit:
So I built it, much cleaner…
It does not like plain wire builds above 26g at all.
Under the posts screws, it has that typical Chinese divot that cuts wires once you get to a certain point and shears them… without clamping them… forget which RTA did this to me before, but I remember throwing it in the trash.
This RBA needs 26g or thicker wire or Clapton, fused.
I got the 27g to grab, but I swear there is probably only .010nm tight…
Tested the oring on my integral tip made by BMM that came with my Stash… to large… it will pull the chimney out. The RBA came with a clear one, but not sure what it was for, but it works without yanking on the chimney.
The oring on the lower part of the chimney is to small imo… needs to be a tad larger… the chimney actually wobbles on the top half of the RBA… said oring makes contact, but not snap in like at all… it should snap into place.
Flavor is good, but not anything different than any other boro RBA…
I’m probably going to clean it again and sell it honestly…
It’s rather average over all at best.
Sent from my iPhone 12 Pro Max using Tapatalk
It reeks of Chinese Machine oil… and you could see they attempted to wash it for it still had rinsing residue still on the bridge.
It’s going through the 4th 10 minute Ultrasonic bath and 4th water change.
Watched Charles Rowes video of him building the collab version of this RBA and he raves about how clean and trusting he is of RJ… not the case here.
It was so bad, just smelling the pieces left that nasty taste in my sinuses and throat.
Going to build it with a simple 27g 2.5mm 6/7 wrap N80 coil, use the 2.5mm air flow, true shame there wasn’t a 2mm or 1.5mm.
I’ll edit this post later on how it vapes, and if 40 minutes and 4 water changes in the ultrasonic removes the machine oil stench
But as it stands, this thing is not worth the $205 price tag (I paid $84) and even then, initial impression is that it’s not worth $84
Again I’ll edit with my build impressions etc once this final bath finishes
Edit:
So I built it, much cleaner…
It does not like plain wire builds above 26g at all.
Under the posts screws, it has that typical Chinese divot that cuts wires once you get to a certain point and shears them… without clamping them… forget which RTA did this to me before, but I remember throwing it in the trash.
This RBA needs 26g or thicker wire or Clapton, fused.
I got the 27g to grab, but I swear there is probably only .010nm tight…
Tested the oring on my integral tip made by BMM that came with my Stash… to large… it will pull the chimney out. The RBA came with a clear one, but not sure what it was for, but it works without yanking on the chimney.
The oring on the lower part of the chimney is to small imo… needs to be a tad larger… the chimney actually wobbles on the top half of the RBA… said oring makes contact, but not snap in like at all… it should snap into place.
Flavor is good, but not anything different than any other boro RBA…
I’m probably going to clean it again and sell it honestly…
It’s rather average over all at best.
Sent from my iPhone 12 Pro Max using Tapatalk
Last edited:
I often wondered if their stuff was overhyped. The good news is that you'll have no problem selling it if that's what you decide to do.This came in today finally.
It reeks of Chinese Machine oil… and you could see they attempted to wash it for it still had rinsing residue still on the bridge.
It’s going through the 4th 10 minute Ultrasonic bath and 4th water change.
Watched Charles Rowes video of him building the collab version of this RBA and he raves about how clean and trusting he is of RJ… not the case here.
It was so bad, just smelling the pieces left that nasty taste in my sinuses and throat.
Going to build it with a simple 27g 2.5mm 6/7 wrap N80 coil, use the 2.5mm air flow, true shame there wasn’t a 2mm or 1.5mm.
I’ll edit this post later on how it vapes, and if 40 minutes and 4 water changes in the ultrasonic removes the machine oil stench
But as it stands, this thing is not worth the $205 price tag (I paid $84) and even then, initial impression is that it’s not worth $84
Again I’ll edit with my build impressions etc once this final bath finishes
Edit:
So I built it, much cleaner…
It does not like plain wire builds above 26g at all.
Under the posts screws, it has that typical Chinese divot that cuts wires once you get to a certain point and shears them… without clamping them… forget which RTA did this to me before, but I remember throwing it in the trash.
This RBA needs 26g or thicker wire or Clapton, fused.
I got the 27g to grab, but I swear there is probably only .010nm tight…
Tested the oring on my integral tip made by BMM that came with my Stash… to large… it will pull the chimney out. The RBA came with a clear one, but not sure what it was for, but it works without yanking on the chimney.
The oring on the lower part of the chimney is to small imo… needs to be a tad larger… the chimney actually wobbles on the top half of the RBA… said oring makes contact, but not snap in like at all… it should snap into place.
Flavor is good, but not anything different than any other boro RBA…
I’m probably going to clean it again and sell it honestly…
It’s rather average over all at best.
Sent from my iPhone 12 Pro Max using Tapatalk
I messaged RJ about it with my broken Eng-Log
My Tagalog is way more English aka Eng-Log rather than more Tagalog than English aka Tagalish
I gave him my initial impressions and asked a few questions about tolerances and if things were meant to be as I described or not… he should respond rather soon being Manila is 15h ahead and it being coming on 6am there.
How he responds and explains things will determine to me if it was all hype or not… customer service means a lot to me. Plus only if I dislike a modder like Gooberbutternuts and his “sir” aka Raphael Mathonet of 67mods do I post negatively on their product page.
I am ultra critical of first impressions, even with the Kerch, those grub screws were bad lol… but that thing outshines it’s price point.
But yeah, can easily sell it for 3x what I paid
which is pretty close to retail… or be an ass and 5x it Sent from my iPhone 12 Pro Max using Tapatalk
Well RJ messaged me back…
His first response was…
I can send you a new one
I declined.
We went through my 5 points I messaged.
The divot was a design to help eliminate the broken posts from those that use chunky builds… the divot would allow the core of said coils to push downward slightly, before causing the grub to warp the post… he openly admitted that single wire users were overlooked on this, and he said he would chamfer the divot rather than have the sharp edge, which should eliminate cutting the wire on the inside edge of the clamps on future batches.
He said he would have a talk with the QC team about the machining oil residue, and apologized… this was where he said he would send a new replacement.
The Chimney was by design, he said it’s slightly smaller to allow easier fitment when people push the chimney down and seat, which makes sense, but also said he will look into having a better oring to achieve that snap feel…
The lack of 1.5/1.8mm air flow was answered also… the choices of 1mm, 2.5-4mm (.5 increments) was a poll choice and the top 5 won… where over 85% were broclouders wanting lots of air and then the remaining percentages were the MTLrs at 1mm
Overall I am pleased he responded and without condescending responses, truly was open to communication and feedback.
I’ll rebuild it tomorrow, and rather than my normal 27/28g 2.5mm 6-8 wrap coil… I’ll drop a Clapton in. My biggest fear is shorting due to not having adequate bite on the single wire and over heat cycles from vaping, the coil pop and it be the negative that does.
Sent from my iPhone 12 Pro Max using Tapatalk
His first response was…
I can send you a new one
I declined.
We went through my 5 points I messaged.
The divot was a design to help eliminate the broken posts from those that use chunky builds… the divot would allow the core of said coils to push downward slightly, before causing the grub to warp the post… he openly admitted that single wire users were overlooked on this, and he said he would chamfer the divot rather than have the sharp edge, which should eliminate cutting the wire on the inside edge of the clamps on future batches.
He said he would have a talk with the QC team about the machining oil residue, and apologized… this was where he said he would send a new replacement.
The Chimney was by design, he said it’s slightly smaller to allow easier fitment when people push the chimney down and seat, which makes sense, but also said he will look into having a better oring to achieve that snap feel…
The lack of 1.5/1.8mm air flow was answered also… the choices of 1mm, 2.5-4mm (.5 increments) was a poll choice and the top 5 won… where over 85% were broclouders wanting lots of air and then the remaining percentages were the MTLrs at 1mm
Overall I am pleased he responded and without condescending responses, truly was open to communication and feedback.
I’ll rebuild it tomorrow, and rather than my normal 27/28g 2.5mm 6-8 wrap coil… I’ll drop a Clapton in. My biggest fear is shorting due to not having adequate bite on the single wire and over heat cycles from vaping, the coil pop and it be the negative that does.
Sent from my iPhone 12 Pro Max using Tapatalk
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
awww, but it's so cute. Kidding. Doesn't mean a damn if it does not vape well. SorryThis came in today finally.
It reeks of Chinese Machine oil… and you could see they attempted to wash it for it still had rinsing residue still on the bridge.
It’s going through the 4th 10 minute Ultrasonic bath and 4th water change.
Watched Charles Rowes video of him building the collab version of this RBA and he raves about how clean and trusting he is of RJ… not the case here.
It was so bad, just smelling the pieces left that nasty taste in my sinuses and throat.
Going to build it with a simple 27g 2.5mm 6/7 wrap N80 coil, use the 2.5mm air flow, true shame there wasn’t a 2mm or 1.5mm.
I’ll edit this post later on how it vapes, and if 40 minutes and 4 water changes in the ultrasonic removes the machine oil stench
But as it stands, this thing is not worth the $205 price tag (I paid $84) and even then, initial impression is that it’s not worth $84
Again I’ll edit with my build impressions etc once this final bath finishes
Edit:
So I built it, much cleaner…
It does not like plain wire builds above 26g at all.
Under the posts screws, it has that typical Chinese divot that cuts wires once you get to a certain point and shears them… without clamping them… forget which RTA did this to me before, but I remember throwing it in the trash.
This RBA needs 26g or thicker wire or Clapton, fused.
I got the 27g to grab, but I swear there is probably only .010nm tight…
Tested the oring on my integral tip made by BMM that came with my Stash… to large… it will pull the chimney out. The RBA came with a clear one, but not sure what it was for, but it works without yanking on the chimney.
The oring on the lower part of the chimney is to small imo… needs to be a tad larger… the chimney actually wobbles on the top half of the RBA… said oring makes contact, but not snap in like at all… it should snap into place.
Flavor is good, but not anything different than any other boro RBA…
I’m probably going to clean it again and sell it honestly…
It’s rather average over all at best.
Sent from my iPhone 12 Pro Max using Tapatalk
At least he was responsive and that does say something. Fingers crossed that maybe a rebuild will make it vape better for you. Just like today I got that Profile PS. Nope, crap. I can't get one of the mesh strips to glow, then it keeps saying check atomizer. Took it all apart and can't see anything wrong really. I will try putting one of the different 510 pins in there and see if that does something. I hate it when shit doesn't work right.
awww, but it's so cute. Kidding. Doesn't mean a damn if it does not vape well. Sorry
Well it vapes good… just not OMG better than the Snail or Kerch etc.
To me still the easiest and most complete RBA with zero issues is the VapeSnail.
The laser etch shown is the Filipino design, which is fitting
Sent from my iPhone 12 Pro Max using Tapatalk
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
I have a few of the different boro's now and the vapesnail for me is the best of the bunch.Well it vapes good… just not OMG better than the Snail or Kerch etc.
To me still the easiest and most complete RBA with zero issues is the VapeSnail.
The laser etch shown is the Filipino design, which is fitting
Sent from my iPhone 12 Pro Max using Tapatalk
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Okay so I put the series pin in the Profile PS ( Pretty Shitty ) and that is glowing evenly and seems to be fine. Must be something wrong with the normal pin then. I don't mind using it as a series deck. I like vaping mesh with a higher resistance anyway.
That's odd, mine works with the parallel pin, I haven't tried it with the series pin.
Sent from a Galaxy far far away
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Well that silver little doo dad that goes in first that the parallel pin screws into had a broken o-ring ( love how they don't give you an extra ) I found one that works, and that doo dad was also not screwed in very well. Once I put the new o-ring on and made sure it was screwed all the way in, now it works. But I am going right back to the series pin. I was getting much better flavor with the .32 resistance than I am currently with the .15. Yes, I'm weird I know. But huge difference in flavor for me.
ohhh dont blame me, your one of the reasons in in the hole. Im just returning the favorGot a new to me custom coated Skelto and yet another Xeta bridge (I could never have enough of these). Much thanks to @bx10r for expertly helping reroute my finances
View attachment 187194
Tornadoalleydeb
Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
My goodness! Vape Mail from @dubya314 arrived today. So so pretty and yep, you devil you. I'm gonna need a white BB LOL Guess I will wait and see how the USPS mail ban plays out but usually China places are pretty good about not listing the contents. The white is due to be available mid Nov. That also gives me time to "work" on hubby. Anyway here are the pretty rainbow insides and the drip tip is a perfect match. Need to get the matching button on there and I haven't decided on which sticker yet. I might use the one I put on the teal insides that @bx10r sent with the his other goodies. This way I have something from both of you Oh! and I should use the black boro that @inganeer sent me too!
Thanks guys you're all really amazing.
Oh! and I should use the black boro that @inganeer sent me too! Thanks guys you're all really amazing.