just get the kind of microfiber towels you normally use to polish your car.
So noted.
just get the kind of microfiber towels you normally use to polish your car.
I'm rather fond of Cape Cod Cloths for much the same reason.Might I suggest:
View attachment 164520
Not abrasive at all. Will polish any metal you want. One can will last forever.
Might I suggest:
View attachment 164520
Not abrasive at all. Will polish any metal you want. One can will last forever.
I'm rather fond of Cape Cod Cloths for much the same reason.
Sent from my SM-N960U using Tapatalk
The "same difference" is in the fact Cape Cod adds an invisible protective layer to keep it shiny for almost twice as long, and has a pleasant vanilla smell as opposed to stinks up the house.Will look into both. Seems the Cape Cod is a little more affordable. Figure either will be roughly "same difference" though.
Cape Cod adds an invisible protective layer to keep it shiny for almost twice as long, and has a pleasant vanilla smell as opposed to stinks up the house.
Don't do much anymore other than vape. Made up 3 30ml bottles of my Butter pecan vanilla custard, a strawberry cheesecake, and Cromwell's custard. Upped the nic in them all from 6mg to 9mg. Since I only vape at 15-20w now a 30ml will last about a week and a half. I'm determined to finally kick the cigarettes again. It's getting better. I also stopped at a LVS and bought some more coils. Trying to buy a couple of packs a week so them I have plenty for the foreseeable future. When use the last one and can no longer get them I've gotten 2 RBAs.
Might I suggest:
View attachment 164520
Not abrasive at all. Will polish any metal you want. One can will last forever.
Walked out the door to go to work, when the mod that was in my purse fell out. >splat
Got home from work, replaced the glass in my Zeus tank.
It's a cotton like wadding with a petroleum based chemical in it.
Oh yeah, and thanks. This is one reason we stress how important back ups are. Been a while since I've broken glass.If I had a reaction button, it would be . Hope you had something to vape at work, Huck.
Walked out the door to go to work, when the mod that was in my purse fell out. >splat<
Got home from work, replaced the glass in my Zeus tank.
The Asgard Mini with the Ultem cap and a full-height drip tip (such as the ONE Tip by District F5VE,...) is gosh darn great for taming coil builds that would normally be hotter than the sun. Especially if you close off two rows on the airflow setting, as doing that is sucking air straight onto the coils as much as possible so, be ready for flavor MIRACLES using thick 26g wires for the cores and 140 watts.I mixed up 360ml's of sour blue raspberry since I've been vaping that flavor like it's my job.
Also resisted the overwhelming urge to buy things only to end up buying a black Asgard Mini including an ultem cap, ring and tip offa reddit. I'm glad he posted it there, if it was here someone probably woulda beat me to it. ?
Absolutely! When the mod flipped and went >splat< the drip tip totally survived. Not even a ding in it.I've broken a lot of my fave acrylic driptips that way, which is another reason to love those AHD tips; that metal sleeve inside makes them a lot stronger structurally.
The Asgard Mini with the Ultem cap and a full-height drip tip (such as the ONE Tip by District F5VE,...) is gosh darn great for taming coil builds that would normally be hotter than the sun. Especially if you close off two rows on the airflow setting, as doing that is sucking air straight onto the coils as much as possible so, be ready for flavor MIRACLES using thick 26g wires for the cores and 140 watts.
My coil build that I have inside my Asgard Mini with the ultem cap? Yea... there aren't too many RDAs out there that can tame that one. Quad-core aliens 26/36 Ni80 at 4 wraps 3mm ID, dual coil at .08 ohms on a single battery mech with the Samsung 30T is going to boil the skin right off of the inside of your lips if you so much as pinch them even just a little bit around the edge of the drip tip. Not saying everyone will want to use the Asgard Mini for taming such a coil build of course, just that this RDA with the ultem cap on it has what it takes to really get there if you know how.Is it hot otherwise?
My coil build that I have inside my Asgard Mini with the ultem cap? Yea... there aren't too many RDAs out there that can tame that one. Quad-core aliens 26/36 Ni80 at 4 wraps 3mm ID, dual coil at .08 ohms on a single battery mech with the Samsung 30T is going to boil the skin right off of the inside of your lips if you so much as pinch them even just a little bit around the edge of the drip tip. Not saying everyone will want to use the Asgard Mini for taming such a coild build of course, just that this RDA with the ultem cap on it has what it takes to really get there if you know how.
View attachment 164591
No, not at all. With tri-core aliens 27/36 Ni80 at 5 wraps 2.5mm ID, dual coil at .11 ohms on the mech, I get along just fine with the stainless steel caps and low profile drip tips.Those coils look nice! But in general, does the AM tend to run hot without an Ultem cap?
No, not at all. With tri-core aliens 27/36 Ni80 at 5 wraps 2.5mm ID, dual coil at .11 ohms on the mech, I get along just fine with the stainless steel caps and low profile drip tips.
IMO wait for them to restock the sky blue version. They (@vaperzcloud on instagram) posted they are going to.Good to know. I’m collecting atties now that we’ve got bans and Deeming on the horizon. You’re a great source of information, mon ami.
IMO wait for them to restock the sky blue version. They (@vaperzcloud on instagram) posted they are going to.
Checked tracking on an item that was supposed to be here a few days ago. It's stuck. Says it departed AZ on the 2nd, then nothing. USPS is really struggling lately. 4 out of 5 packages coming to my house thru them show up extremely late. A few have been lost.
Both the sky blue and the teal are limited runs. These were all gone in virtually no time... the gold plated upgrade deck was sold out everywhere less than a week after they launched it so I was lucky enough to snag one of those just before it would have been too late.Thanks, I’ve got some pretty resin mods in blue/green. Maybe it would match!
Both the sky blue and the teal are limited runs. These were all gone in virtually no time... the gold plated upgrade deck was sold out everywhere less than a week after they launched it so I was lucky enough to snag one of those just before it would have been too late.
The cap and beauty ring on the green version is anodized aluminum, which makes it a satin, shiny-metallic type of green. See:I’ll try to get one. The blue Dead Rabbit isn’t quite the right blue. Did they make a green AM? The resin mods I have are light and dark blue and green mixed together. But I did pick up a SS and blue Elder Dragon, which hopefully I’ll learn how to build on eventually.
The Elder Dragon comes with two pre-made coils. They are 3 core N80 fused Claptons that read around 0.22 Ohms and they aren't half bad. All you need to do is cut one to length and they include a coily device for cutting it at 4mm lead length. Stick it in, put in some cotton and you're done. Well almost, you do need to drip some juice on it. Easy peasy.I’ll try to get one. The blue Dead Rabbit isn’t quite the right blue. Did they make a green AM? The resin mods I have are light and dark blue and green mixed together. But I did pick up a SS and blue Elder Dragon, which hopefully I’ll learn how to build on eventually.
The cap and beauty ring on the green version is anodized aluminum, which makes it a satin, shiny-metallic type of green. See:
The Elder Dragon comes with two pre-made coils. They are 3 core N80 fused Claptons that read around 0.22 Ohms and they aren't half bad. All you need to do is cut one to length and they include a coily device for cutting it at 4mm lead length. Stick it in, put in some cotton and you're done. Easy peasy.
The electric blue version is all stainless steel, and that looks like this:It’s slightly too green, but I could get away with it. Thanks, I appreciate it.
The electric blue version is all stainless steel, and that looks like this:
Sky blue version and teal version:Ooh, that’s perfect!!! That is so pretty, and would look awesome. Merci, mon ami.
Thanks, I’ve got some pretty resin mods in blue/green. Maybe it would match!
Was this from here or China, Chain? The strange thing is my last two packages from Sourcemore arrived here with a label saying California, and no Chinese info on them.
It appears that evcigarettes.com has the Baby Blue and the Tiffany colors in stock for $49.99.
Asgard Mini 25mm RDA by Vaperz Cloud
Here at EV Cigarettes, we carry all of the best vape e cigarette products on the market. Spend less and get more when you order from our convenient online store.evcigarettes.com
I had not seen those colors before. They are stunning!
The Asgard Mini I got is black. It's nice, but dang, I'd love to have the blue-green one!
OUTSTANDING @MrMeowgi !!Went with a black Aromamizer plus v2 and added the mesh deck and a couple packs of mesh and cotton.
How many thousand does that add up to now!? ?Bought flavors
Ummmm.....something in the range of 1300How many thousand does that add up to now!? ?
So you know its not a rubbish hit on you.
But I think you may have......hundreds!?
Nicely, dont take it wrong as I am just curious, how many do you think you have now?
So im not misunderstood, only saying because im a bit perplexed by some things here lately ( not you) but just to be sure.
Ok, fess up, how many hundreds, thous combos you got? ?
Wow, 1300! I get confused with the maybe 20 I have with what im going to mix.Ummmm.....something in the range of 1300
Yeah....I’m an addict. Better this than other things!
We had a challenge one time.....teams of mixers were sent some pretty “interesting” flavors(Wasabi, Chili, and one other) to make mixes with. They could use other things, but the savory flavors had to be apparent. The recipes that came out of it were quite impressive!Wow, 1300! I get confused with the maybe 20 I have with what im going to mix.
Had more but threw them out. Nobody to give them to here.
When I think of the success/fail rate I had, some I just hated the taste of them like many mangos that had a cooking oil aftertaste, I think it was 50/50. I rarely experiment now. Do now and then but nothing like I used to do. Got sick of wasting money, time and effort on things I threw out. I found out too that some things I like to eat or drink I hate to vape. Like Skittles, I like to eat them but when I tried a vape that did taste just like them after about 10 vapes I couldnt stand it. Grape is the same. Funny that.
I heard once of people making bacon flavoured mixes and similar like main meal flavours, not desserts. I think that would make me sick.
Have you made anything like that?
We had a challenge one time.....teams of mixers were sent some pretty “interesting” flavors(Wasabi, Chili, and one other) to make mixes with. They could use other things, but the savory flavors had to be apparent. The recipes that came out of it were quite impressive!
Me, personally? Someday, someone will come up with a decent bacon flavoring. Sweet and savory mix. Chocolate and bacon? Maple bacon donut? That’s something I’d be very interested in. Otherwise? I wouldn’t develop one myself, but if someone developed a recipe that peaked my curiosity, I’d mix it.