This tornado nano is way more impressive than the bigger version so far...like a totally different tank (i mean, it IS a totally different tank design..)
Sent from my SM-G935V using Tapatalk
Sent from my SM-G935V using Tapatalk
This tornado nano is way more impressive than the bigger version so far...like a totally different tank (i mean, it IS a totally different tank design..)
Sent from my SM-G935V using Tapatalk
It's got a lot more density and flavor than the big tornado, and the airflow isn't as ridiculous as the big one. I'm still on my first build but so far so good, I'm really enjoying it.Are you trying to divert us from ripping this guy to shreds?
Just kidding - tell us more![]()
you know, i really was trying to be moderately diplomatic at first, but that was unsuccessful... hence, the dubbing of sir twatwafflethere once was a guy named pusvape...
who started to act very rude...
and then came along doc iguana
who gave him some "baditude"
Pus was so aweful
He was a twatwaffle
the Fugees said he was screwed
That's awesome Lucy!!! Perfect ending.there once was a guy named pusvape...
who started to act very rude...
and then came along doc iguana
who gave him some "baditude"
Pus was so aweful
He was a twatwaffle
the Fugees said he was screwed
not sure about estimating resistance, but the fused clapton example would be 2 28g cores wrapped with 32g... would think the reaper clapton should be 24g core with 28g wrap (but if it is the opposite, it should be readily apparent)... the mad rabbit and immolation you would probably have to google - would guess low gauge kanthal, but could be a nichrome?So what exactly do I do if I suddenly find myself in possession of a crap ton (oh, wait, what's that term again? oh yeah) I mean an elegant sufficiency of fancy wire that I know nothing about. Examples-Fused Clapton 28*2 +32, what does that even mean in terms of trying to estimate coil resistance before I wrap a coil? I know with standard clapton you can estimate based on the inner wire, but what about fused clapton since their are two wires? Reaper Clapton 28/24 does this mean 28 around 24 or 24 around 28? Might sound like a dumb question, but not how I'm used to seeing it listed. Mad Rabbit Low Resistance wire - What is this stuff even made of? Immolation Competition Wire 22g - again what is this?
Mad Rabbit just tells you "It has lower resistance per length than kanthal" but no other info. Pretty sure it's stainless of some sort, but can't confirm. Immolation comes a bit closer to saying what theirs is, by calling it "he hottest, newest custom Stainless Steel Alloy blend available" but still don't know enough to know if I can use it for TC.not sure about estimating resistance, but the fused clapton example would be 2 28g cores wrapped with 32g... would think the reaper clapton should be 24g core with 28g wrap (but if it is the opposite, it should be readily apparent)... the mad rabbit and immolation you would probably have to google - would guess low gauge kanthal, but could be a nichrome?
I got a Troll v2 today. I'm surprised how good it is. I want another one
But that's not a Goon! You can't start liking other RDA's, or I won't know which one to buy next.I got a Troll v2 today. I'm surprised how good it is. I want another one

Wow, you're right!Pusvape is posting nice-nice
Lets see if he can hold his mucus plug
But that's not a Goon! You can't start liking other RDA's, or I won't know which one to buy next.![]()
http://www.efun.top/wotofo-the-troll-rda-v2.htmlBut that's not a Goon! You can't start liking other RDA's, or I won't know which one to buy next.![]()
The Troll? Yes, very affordable. No BF pin thoI wonder if you can get it affordably with a BF pin
The Troll? Yes, very affordable. No BF pin tho
OOOOOO! Perfect! Just in time for Sharknado 4!!!!
Pusvape is posting nice-nice
Lets see if he can hold his mucus plug
I just read his post about if he can't find affordable nic base, he'll have to give up vaping. I'm sooooooooooo tempted to "be him" for a minute, and ask him where the fuck he's been for the last 2 yrs, under a fucking rock? I've been building my stash for 2 yrs now, since June 2014. He's clearly a complete doofus nimrod if he hasn't, and I have zero sympathy. But I'll stick to ignoring posts from those I've ignored. It drives them crazy.
Andria
Cool!!!!! What does that mean? lolHey Atcha - you got post #20,000
Cool!!!!! What does that mean? lol
Oh goodie!!!!!!!!!!!!!!!![]()
I dun told you! A big fat parallel coil, with the air in single coil mode
![]()
"Parallel, ..." he says. Twisted I'm building a little of currently, in anticipation of the Velocities. Not checked the ohms on them yet. Been using a strand of 28g Kanthal bent over and twisted on itself. I then, wrap 5 to 6 times around a 3 mm ID mandrel. Been thinking of doing braided but not sure that would quite be a good idea. @raymo2u may know a little better, though. I may be seeing a pipe dream while over thinking a bowl of beans.
I do like the 3 to 3.5 mm ID too. It lets me cram in a lot of Rayon to cascade for slurping up juice.
"Stainless, ..." he says. Kanthal says I, not quite gotten to stainless, may in the future. I'll check with the secondary future me. The primary future me is an asshole and follows the Prime Directive, won't tell me a thing. Figure you're onto something decent though in stainless. Not quite a skeered of it but still got lingering cautionary signs in my mind, ergo dragging the heels to buy some 316 wire. If braiding of Kanthal does well, I finger it'd do well with stainless too.
Your build though as is does look kick ass. I can see the advantages of the Goon style deck over the Velocity style. Both are good overall deck designs & I'm not knocking either. To me it would be difficult to call a best. I'm looking forward to the Velocity style as a new builder & think it'll do good even as a seasoned builder from the reviews I'm seeing or hearing. Yep, peer pressure.
That is not to say I will not ever try the Goon style deck. I do intend to try it. For now I'll go with the Velocity style & be pleased as Punch, until I've gotten an itch to scratch at the Goon style. Finger both styles will remain on some market in some way.
Aren't ya kind lassy, aren't ya kind. lolCongratulations - let me be the first one to virtually shake your hand
)Aren't ya kind lassy, aren't ya kind. lol
Well, chicks and dudes, I'm off to bed. Early day again tomorrow. Long day. Maybe I'll be working on another "slow" report so I can check in during runs. (report runs)
You message board from the toilet?Aren't ya kind lassy, aren't ya kind. lol
Well, chicks and dudes, I'm off to bed. Early day again tomorrow. Long day. Maybe I'll be working on another "slow" report so I can check in during runs. (report runs)
You message board from the toilet?
That is my wife, I am Bob.Hey, it's my old pal --- Barb Wire
That is my wife, I am Bob.
But, it matches his slippersSorry, was misled by that frilly apron you had on earlier
But, it matches his slippers
I was explaining the apron, NOT admiring his footsWo! I thought Moo was our resident foot freak
Aporon? Ohh I was doing some welding.But, it matches his slippers
But I have such loverly feets.I was explaining the apron, NOT admiring his foots
That's Moo's gig. I want no part of itBut I have such loverly feets.
I just got a BF cloned Goon and like it way, way better than the Velocity. But that's just me.
Check you pm Morley
Right Toe! "Left foot!"
See, now all this peer pressure going on again. "Try the squonk Morely, you might likes it." ... "try a mech mod Morely, you gonna luvs it. Just be careful to not get busted by BATF for carrying a pipe bomb, or blowing up your house."
So, ... Morely tries these. Morely does indeed likes, luvs them.
"See Morely, we know your happy spot."
The Morely smiles but has this creepy feeling. "Erm, things are going right, people are saying I make sense when I know I don't ... hmm ..." ... "Well, alright maybe it is a case which the world is fucked & I'm just pulling a Duke boys."
Not quite figured which I am yet, Bo, or Luke. I'm probably Bo, all dark and quiet like. Kid you not I'm not much for words except in having a keyboard at hand. Even then, I have gradually withdrawn a great deal more so over the past few years. Often bite my fingers to avoid typing in useless garbage. Suppose that's all in how you see it though.
Idk, I'm not familiar with the clones. But the 510 adapter from the Griffin fits in the authenticSo where the fuck do I find a way to get a smaller dt on this goon without having to mod it?
Not quite figured which I am yet, Bo, or Luke. I'm probably Bo, all dark and quiet like. Kid you not I'm not much for words except in having a keyboard at hand. Even then, I have gradually withdrawn a great deal more so over the past few years. Often bite my fingers to avoid typing in useless garbage. Suppose that's all in how you see it though.
Idk, I'm not familiar with the clones. But the 510 adapter from the Griffin fits in the authentic