Become a Patron!

build

  1. littlebrovapes

    HADRON SQUONK BACKPACK PLUS RAGNAR RDTA MESH DECK AND BUILD FROM STEAM CRAVE

  2. littlebrovapes

    STEAM CRAVE TITAN DUAL SERIES MESH DECK BUILD

  3. CaFF

    Ehpro/Eciggity Morph Tank Build

    Got one of these real cheap, cleaned it and then it sat awhile. Got bored being awake at like 0230 and decided I'd build it. A bit quirky, but a pretty neat little tank. =) Mine is serial #899 Atomizer: https://eciggity.com/morph-tank-by-ehpro-eciggity/ Here's the specs: Pix...click them...
  4. Amj1767

    Need this thing to hit harder!

    Mech heads I need some insight. Here's what's going on. Bonza Mech, fully charged Samsung 30t, Occula RDA, build is 3x26g A1/32g SS 316L alien dual coil 5 wraps at 0.17. It's hitting like an angry 3 year old and I need it to bite like a Doberman. Change the build? Something with a faster ramp up...
  5. JosCiv

    Brown stains on cotton

    Hi all, I have a small question regarding my cotton. As you can see on the picture I've added, there are some marked spots that are brown. I know this could be 'cause of the liquid I use but the thing is that it only turns brown on these exact spots. It's the 3th time that the brown areas...
  6. B

    Builing my own RDA

    so im new to this "vape world", i work as a mechanical engineer in the Airsoft industries, I have at my work some CNC and Lathe and i want to start making RDA for squonk first and then RTA's. Right now im working my own design but i have a few concerns that i hope you guys might help with 1...
  7. WotofoOfficial

    How to build your Serpent Elevate RTA

    How to build your Serpent Elevate RTA 1. You need a Serpent Elevate RTA. 2. Find out a best size for the coil.(I prefer #6) 3.Instal the coil 4.Instal the cotton 5.Cut the cotton 6. Put in the cotton 7.Wet the cotton 8.Filling the juices You only need 33 words, Then you...
  8. D

    Question on velocity decks and coil placing.

    I mean the decks with the two posts with 2 terminals per post. Like rabbit ears when looking from the side. So, when putting one coil in and placing I can easily clip the leads off, but as many people know when putting in the second one I can clip one lead with my wire clippers but the second...
  9. D

    Help with juice running down the side of rda deck between wall and post deck?

    See image for illustration. What I'm talking about is the juice that's literally ALL OVER the wall of the post deck, even with a firm and snug fitting cap/wall/whatever you call in being in place. I never overfill it, or drip it onto the walls on accident, but every few hours or so a day sure...
  10. Juicy-j

    Mechanical mod build question...help!

    So im kimda new to mechs...know my safety and all the "prerequisites" I been using a series and loved it, decided to get a timekeeper tube. He4es the questions.....i camt get a build that hits hard. No matt3r what type of build i throw down, i havr super slow ramp up and just "meh" hits....from...
  11. ziadtorkey

    What is the difference between different coil designs?

    I'm new to building my own coils. I just can't get it, what is the difference between Clapton and alien and tiger etc. Forget about the the resistance, does the coil design matter in flavor?
  12. Lady Sarah

    17 gauge stainless steel electric fence wire?

    I've had this 17 gauge electric fence wire for years. It never rusts. The label on the spool does not indicate which type of SS it is. Has anybody ever tried using it on a mod? I am in no hurry to rebuild my coils,but want input.
  13. JosCiv

    New to building

    Hi all! As the title already mentioned I'm new to building so I was wondering if I could get some pro tips... I know the basics (like pre-burning and removing the hotspots, thinning out the cotton,...) but I just want to know if there are some hidden things that nobody talks about to get a...
  14. M

    Flavourcountry Fused Clapton coils

    Sup guys, so i have some (twisted?) fused clapton coils 28/32ga from Rofvape that i wanna but to good use flavour-wise in my peerless rda, with my Smok Alien Mod. So im wondering what would be the perfect wrap-count/diameter for a really flavourfull vape, preferably not very warm, single or...
  15. _mylesc_

    Looking for an RTA

    Hey everyone, I tried a friends RTA for the first time and am interested in purchasing one to learn how to wick my own coils. I wouldn't want to build the coil itself but just wick the cotton. Any good beginner tanks in mind capable of high wattage and user friendly? I would be using it on my...
  16. VapeMate

    Building Claptons on DaWhale RDA

    Hello VU Master Builders, I've been trying so hard to build just a simple dual coil on my DaWhale RDA and whatever i do i cannot get it to the right resistance.i thought of some solutions which look more like a workaround which i don't want to do... btw, i'm using this 32g Clapton wire and Subox...
  17. T

    Is there negative side effects of having batteries drawn at max drain?

    I was hoping to make a crazy low ohm (Around 0.1-0.15) cloud chasing build with 22g kanthal a1, but the max wattage I would be able to use would be 127 which is my sweet spot. I'm just wondering if there can be any negative side effects to my batteries if I have it constantly pushing out 35a. My...
  18. Tyzer

    Cloud Chasing Build

    Hi Guys, So I'm thinking of entering a cloud comp and am after some recommendations for coil builds. Firstly let me say I am user of mech mods and am a competent builder. I understand ohm's law and only use Sony vct5a batts in my mods. I have a Goon 1.5, and a Druga that I'm thinking of using...
  19. Ladylizard74

    Moonshot frustration!!!

    So.... as a massive lover of the tornado I went ahead and purchased the moon shoot supreme. Never had leaking issues as I'd mastered the art of wicking the tornado but I'm having what I think is a general build issue so could do with some advice on a decent build...... I'm using Claptons atm but...
  20. B

    What build would you recommend for this hardware?

    I have a Smok BEC PRO, I'm waiting for a Vgod TrickTank Pro (clone) to arrive, and I'm wondering, which kind of build would be good for the airflow and for the mod? Now I have just two types of wire, a 26 awg SS316, and a 28 awg SS... Any build recommendations?
  21. djk8280

    Cotton Quest

    My friend the, TheDrunkenWeeb, is on a quest to create stats for any and all different cotton types for rebuildables. Looking for some eclectic brands and materials used by all of you beautiful vapey type people. Thanks in advance! Please post what your fave is as well as stuff we should pick...
  22. submerger

    Quad Coil Build (Sense Herakles RDA)

    The story -- I picked up a Tsunami from a local shop the other day, and on Friday took a swing at a quad coil build. I am not posting photos because it was ugly, but worked. ~4 wraps per coil with 24G kanthal ~1/16 diameter. My math was a little off, so it less than.09 with the cotton and...
  23. N

    Flavor build for mech mod.

    Hey VU. I'm a flavor chaser trying to find a good build for a mech mod. This is my first mech mod and im personally a fan of favor over clouds. So my question is, what is a nice flavor build for a mech mod so (low ohms) shooting for .1-.2 ohms. Nothing less than .1. I'm used to clapton build on...
  24. Mikhail Naumov

    What kind of builder are you?

    Just wondering how many people still build coils of their own, since I know specialty wires come on 50 foot spools for dirt cheap now and premade alien coils are sold in brick and mortars. Rebuilding has become a somewhat lost art in this recent year, so I figured I would make this poll to see...
  25. Jates12

    New to Building - RDA or RTA for best flavour?

    As the title of the thread reads im new to the world of rebuildables, im looking for the best flavour I can with also decent clouds. Im currently vaping on a Smok TC80 with a Uwell Crown 2 and the flavour is good but I want to get more. What would you guys recommend in RDAs or RTAs and pretty...
  26. Cbasten92

    Limitless Mech Mod questions and build help.

    OK so my boyfriend has a limitless matte black copper mod and the griffin 25 plus atty. He runs a dual build and has the LG brown and yellow batteries. He seems to have to change his batteries often. His question is what's a good build and what it should read (ohms) that won't drain his battery...
  27. Avidos

    Vaping on a 60W mod

    First of all, this thread is about a user(me) who is asking on how and what to build on a 60W device. So people who's only using VW mode on similar wattage range have an idea too. For example: I am currently vaping on a.. Aleader Funky 60W mod @ 55W GeekVape Avocado 24 I am using a...
  28. gbalkam

    HOW TO: Looking to make your own coils? Simple how to video.

    A simple coil with a 1 ohm resistance. (or pretty close) Use 2 for a 0.5 ohm dual coil set up. I did not tune the coil, just showing how easy it is to start coil building. Hope this helps
  29. cjangel70607

    Whats the minimal ohms i can use for my build

    Hello, I've been using steam engine and vape tool apps to build my coils, but I'm putting together a new mod, and unlike using 18650s or 26650s I'm using a 3s 11.1v 50c continous 100c max 5000mah lipo on my dna 250. I have a 46mm alliance fat boy rda, and want to run 8 coils. I'm using advance...
  30. cjangel70607

    From Beginning To End, My First Build

    Hello guys forgive me for my ignorance of forums. This is my first forum, still learning the rules, the forums within the website, where to post, and what i can and can't post. I figured this would be a good place to post my first build. I'm not new to vaping. I seen it come a long way from...
  31. MagicJosh

    THE REMENTRY RDA REBUILDABLE ATOMIZER BY REM CREATIONS

    I just got one of these today. I show a couple problems with it.
  32. stevenbuker12

    Looking for avocado or limitless rdta

    As the title says, I'm looking for an avocado or limitless rdta... Willing to trade for them. Don't really want to buy but I guess for the right price I will. Trades trades trades though lol
  33. Flyhigh92

    mad hatter v2 dual vertical coils

    Put dual vertical coils on my mad hatter and getting terrific flavor. Anyone ever try it? Its the first time i build from scratch and did higher ohms .7 ohms on the dual with 26awg kanthal and 10 wraps with kuro cw-25. Is it the fact that I put the coils vertical or just that i built at higher...
  34. KingClouds

    FLAVOR BUILD HELP

    Hey everyone! Okay so im looking for an awesome flavor build, i could care less about clouds. So right now all i have is 24 gauge A1 Kanthal wire. Does anybody know of any great flavor builds with this wire? Thanks!
  35. KingClouds

    Im so confused..... help

    Hey everyone! So i recently purchased the Smok H Priv and put on the Indulgence Mutation X V4S RDA. I am new to building coils and wanted something that will tell me what my coils need to be vaped at (wattage). So does the H Priv really help you? and what is resistance lock? From what ive heard...
  36. Cloudz420

    Herakles rta-4 build question

    So I just ordered the Herakles rta-4 online. Should be here on the 5th. My question is what usefulness the rotating positive post has as far as building goes. Because of how it wicks I can't think of a reason you would move it to build and can't find any examples on Google or Reddit. Was hoping...
  37. Omkuss

    Troll v2 recommendations to improve flavor?

    Hi all, I'm new to the site so forgive me if I make any faux pas! I've been vaping for several months and finally invested in an RDA (not much, got the v2 because I found it cheap and I liked the velocity style deck) to up my build game. Unfortunately, it's not even coming close flavor wise to...
  38. injamulhaque7

    Ideal SS316L builds for Kanger Topbox Mini TC mode

    Started vaping just 2 weeks back. I made a single spaced coil with 24ga SS316L wire. It reads at 0.35 ohms. The juice seems to heat up too soon and at just 170 C, the vape seems to taste burnt. Whereas with the stock OCC heads i could comfortably vape at 220 C. Could not manage to get my hands...
  39. kstat83

    CrazyTwists - Specialty Ti Coils

    For those of you who don't know CrazyTwists, he's a California based coil-wrapping savant. He does business both through an eBay store of the same name, and via his own website (Google CrazyTwists - you'll find it). I run an eBay store myself and routinely recommend him to customers who are...
  40. tr1age

    My First RDA and Coil Building TUTORIAL on the Mutation X V4

    This video is a review of the Mutation X V4 sent to us by directvapor.com, but we wanted to approach it differently than your run of the mill review and unboxing. Since I am new to RDA's I invited a guest. Steve, owner of Truvé Vapor, joined me to help teach how to build an RDA! He kinda rocks...
  41. kennykoils

    HELP .1 ohm coils for tesla invader

    Title says it all, I'm picking up an invader 2 tomorrow and I'm looking for help with some .1-.15 ohm coils, prefer a quick ramp up. And yes. I know it's low, but the amp load will be split between 2 vtc4, so about 21 amps a piece gives me plenty of headroom. That being said, looking for ideas...
  42. Elvisjgum

    Flavour build for freakshow on hexohm?

    hi there I'm new to building and was wondering a good build for my freak show on my hexohm V2.1? What wire, how many wraps , ohm? Anything to help get the best flavour I can from it. Thanks in advance! Grant
  43. HeyItsProdigy

    Coilerz.com is out now and needs users!

    Coilerz.com was launched a few days ago. The site is simple, either upload a build or search for a build, wire, or resistance. The features listed below are currently being developed and scheduled to be released within the next few months. If you have any suggestions for features that you would...
  44. Lorenzo_93

    Coil and build help

    Hello. I'm just getting into doing my own coils and what not. Im a noobie so please bare with me. I have a general understanding of how they work. Thicker wire takes longer to heat then the thinner wire. The higher the gauge the thinner it is etc. But i have a Kanger Kbox Mini with the subtank...
  45. jauld501

    General building questions

    Alright so im new to rebuilding my own rda and was wondering what are the basic rules of thumb and principals behind coils, like what causes difference in ohm's in relation to how the coils are done, or depending on what i want in a build what would the difference in gauge of wire effect? And...
  46. M

    Coil building newbie

    What's up guys. I'm just getting into the whole coil building thing and I would greatly appreciate some insight as to what different types of coils they're are and what the size of it means and things of that sort so forgive me if my terminology is inaccurate. I am one of those rookies that...
  47. blankshe

    OK?? KBOX MINI & ROYAL HUNTER MINI RDA

    Heyy Fellow Vapors, Pardon me I'm still somewhat a newb to vaping... 1. Does anyone know if I can run a Royal Hunter mini RDA on a KBOX mini? 2. What would be the hottest build or good build for good vapor production with this setup? Ohms/watts etc/gauge/wraps/diameter 3. Would a royal...
  48. blankshe

    KBOX mini + Royal Hunter Mini RDA

    Heyy Fellow Vapors, Pardon me I'm still somewhat a newb to vaping... 1. Does anyone know if I can run a Royal Hunter mini RDA on a KBOX mini? 2. What would be the hottest build or good build for good vapor production with this setup? Ohms/watts etc/gauge/wraps/diameter 3. Would a royal...
  49. Satch

    Best coil?

    I just got an ipv 4s and I have a mutation x I was trying to figure out what build would produce the thickest clouds. Any suggestions?
  50. Cloud

    Batteries

    What is the best and safest battery that will heat up my coil faster. I'm using a vtc 4 on this .16 build but I feel the ramp up time is to slow. Any suggestions on better amp batteries.

VU Sponsors

Top