Become a Patron!

wire

  1. michaelvapors

    WTS: All Must Go Best Offers Accepted!

    Footoon Hades V2 and Cerberus Atty $99 Pioneer4you IPV D3S Kit with Atty $20 SOLD QP Design 28mm Kong RDA Master Kit $50 TimesVape Dreamer + Ardent RDA Set $90 Four Uwell Crowns: 1. Black New with coils $17 2. SS Used extra tank $12 3. Crown III Black used with OD Green Tip $15 4. Crown IV...
  2. michaelvapors

    WTS: Wire Price Drop

    2 Tobeco 26ga Kanthal 32 x 32 Clapton II rolls $10 UD Roll Coils Twisted Kanthal $25 26ga two wire 15ft 28ga two wire 30ft 30ga three wire 30ft 28ga three wire 15ft 28ga three ribbon wire 15ft Thunderhead Creations Clapton Kanthal Wire Rods 145mm 28/24 2 packs $20 GeekVape Kanthal 26/32...
  3. BigBird

    WTB Mesh coils/spools/prebuilt wire/cottonbacon

    As it states, I use the profile 1.5 by wotofo currently and I'm looking for any mesh coils/mesh spools that will fit with it. Also looking for any bulk wire coils for build testing on my other rda's. And of course...cotton bacon. Thanks.
  4. Synphul

    Lightning Vapes (LV) coming name change.

    I already posted this in rebuildables but in case someone misses it there, with all the changes in the industry due to them cracking down wanted to try and keep people up to date. I received an email from LV - Here is the email I got from them: We're making some big changes around here. In...
  5. Synphul

    Lightning Vapes name change coming soon.

    Not sure if anyone's seen this yet, just trying to keep everyone up to date on coming changes when possible. Lightning Vapes is rebranding to distance from vaping while still providing wire. Here is the email I got from them: We're making some big changes around here. In the coming days, we...
  6. V

    Best wire brand (SS316L) not sure at all

    Hey guys,how are you? I want to make my own 0.4 ohm parallel coil (5 wraps) by using stainless steel 316L wire. The problem is that i do not know which brand should i use in order to build it, i've searched a lot but i am a little confused. For example, i found this: -Youde UD Stainless Steel...
  7. V

    Stainless steel GAUGE parallel COIL

    Hey guys! I've been searching a lot and i decided to use stainless steel material to create my own COIL (stainless steel GAUGE parallel). I know that there exist other materials such that kanthal a1 or nichrome 80,90. The problem is that i found different types of wires related to this material...
  8. NH Coils

    MTL Fused Clapton Coils by NH Coils

    Hi guys, Im building coils especially for MTL users As a flavor chaser myself I’ve been searching for a long time after the perfect MTL experience, after a long time and many wires I’ve started building the coils for myself by seeking for the best flavor and vapor. Im selling my own handmade...
  9. 3Avape Official

    Vapor Storm DIY Cable Wire Cutting Plier $2.1

    Parameters: 5-inch (127mm) insulate rubber grips Max cut= 1mm copper wire 45°angle use in tight spaces Spring loaded for easy use Premium quality professional grade pliers Package includes: 1x Vapor Storm DIY Cable Wire Cutting Plier
  10. VapeMate

    Calculating r/cm for Tiger wire

    Hello guys, I've recently got some new wires.I'm trying to calculate resistance per cm of this tiger wire from VapeThink can anybody guide me on this? P.S.: i don't have any ohm-meter and i don't have my vv mod(which has an ohm-meter) for a while, so i need to calculate the resistance manually
  11. dkt0591

    Is AtomizerWick wire still available?

    Hi, i just find AtomizerWick wire on google, but i'm not sure is it available to buy? i do contacted them via email but never get response from them :( facebook or insta didn't update recently, i'm going to buy, but really worry if they still working or not :(
  12. Frosty

    Is there a big difference between cheap and expensive coils?

    The only thing that pops into my mind is perhaps a difference in material being used, but I'd like to know if there's any significant difference between e.g. unbranded fused clapton wire (priced at 2-3$ for 5m) and the same (branded) types that cost nearly three times as much (for the same amount).
  13. iMaverick

    Types of Wires and Safety

    Hi Everyone, sorry in advance if there is a thread with the same content. I am new to coil building and in general all to do with vaping, not accessible to purchase OCC so decided the coil building route. I did a bit of research and got mix results with being reliable and safe to metal...
  14. ziadtorkey

    What is the difference between different coil designs?

    I'm new to building my own coils. I just can't get it, what is the difference between Clapton and alien and tiger etc. Forget about the the resistance, does the coil design matter in flavor?
  15. Lady Sarah

    17 gauge stainless steel electric fence wire?

    I've had this 17 gauge electric fence wire for years. It never rusts. The label on the spool does not indicate which type of SS it is. Has anybody ever tried using it on a mod? I am in no hurry to rebuild my coils,but want input.
  16. Tintin

    Hotter coil build?

    hello! Im currently using the VGOD pro mech with dead rabbit, and im on .2Ohm on some tiger wires 26G 5wraps around a 2,5mm drill, however, it doesnt get hot as fast as id like, my question is if there is A better wire to use without changing to lower than .2 , and if so which wire(s), i prefer...
  17. S

    Help with building a coil

    I have Fuchai 213 with Tvf8 big smoke tank. Ive been building my coil using premade coils, so I just install the two coils and put the cotton. I decided to build my coil but I do not know which wire can help to get what I am looking for. I found 0.4-0.5ohm is the best smoke and test ( I havent...
  18. BananaRoo

    Incompatible wire gauges?

    I'm sorry I have to start a new thread, I replied this in a thread that seemed suitable but I don't think anyone has seen my comment, the thread id pretty old, so here we go, I will paste my question here: "Hello people, I have a problem with my tfv8 baby rba and 30 gauge wire, so I thought...
  19. C

    Wondering about this Ni80 wire

    Hello guys, so I found somebody selling Ni80 wire that contains/has a composition of 21% Chromium, 1% aluminum, 1% Carbon, 1.5% Manganese, 0.2% Silicon, 0.04% Copper, 7%-(20%?) Titanium, and especially 0.8% Iron. Is this wire okay to use? The person did say it's very clean plus machined clean...
  20. P

    Help Wire Nichrome 80 Manupacturing factory

    Please tell where can i get the Nichrome 80 wire with my heavy unit purchase need 50lb for my repack 80 quality nichrome products
  21. Enrocc

    FUSED CLAPTON SPECIALS! 21'+ quad core ss - $55, 10'+ tri-core ss - $25, 5'6" tri-core ni80 - $15!

    Hello! I love making wire and I do it well. Custom orders are welcome! Triple or quad core? Yeah!! Stainless steel? You got it!! I also make perfect coils to specs--diameter, ohms, clouds, flavor--you name it and name your price and I'll make it right now! Message me here or email me at...
  22. Deepwinter

    Anarchist wire & Twisted Messes Nichrome, Worth it?

    Ok so Im posting this because there's new vapers coming onboard all the time and it's a mine field of products out there with marketing BS that can bamboozle even someone with a skeptical mind when there completely new to everything in a subject and will likely weight the opinions of some of...
  23. Synphul

    MKWS quality?

    Thought I'd ask if anyone else has had subpar performance from mkws or other premade spools of advanced wire builds. Not having the wire sizes needed and unsure whether it was worth it for complex builds I gave it a try. A spool of half staggered fused clapton which after looking at the results...
  24. VapeMate

    Some wire safety questions

    Hello community, i've been looking around for builds in youtube when i saw an interesting title, wire safety! i knew some things about nichrome but i didn't know a thing about different grades of nichrome after watching that video, i started to research and study more but i wasn't so happy after...
  25. PhantomOp

    Wire -- Quality -- Sources

    I keep running across a bunch of threads where people are asking about the good wire / best wire to use for coil building. Now we have a "sticky" thread that will be updated with the wire suppliers and opinions of quality. Advanced Vape Supply Good quality wire, clean, no complaints SS316L...
  26. J

    Can't get TC to work w/ mini RBA plus on Kangertech Nebox

    I've been wrestling with my vape for 4 hours now! (Literally...sadly). I've rebuilt my rba at least 7 times and am having less than stellar results. I'll start by listing a bunch of facts: -I've been using this nebox for 3 weeks now without troubles, with the pre-built ni200 and Ti organic...
  27. knifeguysreview

    Cheapest wire?

    Where do you guys buy your wire, where is cheapest? I tend to buy mine on amazon.
  28. cjangel70607

    Whats the minimal ohms i can use for my build

    Hello, I've been using steam engine and vape tool apps to build my coils, but I'm putting together a new mod, and unlike using 18650s or 26650s I'm using a 3s 11.1v 50c continous 100c max 5000mah lipo on my dna 250. I have a 46mm alliance fat boy rda, and want to run 8 coils. I'm using advance...
  29. icpu

    BF RBA - Cubis - Joyetech: What wire is the stock coil?

    I just bought Cubis Pro (in a kit with Vtwo mini) and i thought that I want to try using the BF RBA head. Before I pour some juice and put that thing (with the stock coil) in my mod, I want to ask what was the type of the stock coil? Right now I'm assuming that it is Kanthal wire. But I...
  30. stevenbuker12

    HELP ME CHOOSE!!

    I am in the market for s new mechanical mod and am stuck. Very stuck. I'm between a SWITCH MOD AND CAP KIT, A RIG V2, SUBZERO SHORTY COMBO, and a BROADSIDE. Someone please help because I want to get it tomorrow, I'm leaning towards a broadside because it's made by or with the Hotwires guys so it...
  31. Avidos

    Fertility Competition Wire

    Has anyone tried this? I'm currently using it in my 2mm 8-wrap dual coil build, reading at 0.39 ohms
  32. SRVapers

    Ribbon wire Spools and Lengths

    Alright, so I'm a fairly new builder and have only used .4x.1 ribbon wire. I had a 15-25' spool of it (its not in front of me, not sure exactly the length). But as much as I tried, I COULD NOT stack that wire! It was just too small and wouldn't flatten enough to lay flat and straight. Kinks...
  33. M

    The Auto-Claptonator (video)

    (Haven't done the write-up tutorial yet; coming soon.) The Auto-Claptonator "If you can put on pants, you can make clapton! :)"
  34. E

    Why is my cotton always snapping in the middle after about a day of usage?

    I've been having this ongoing issue where my cotton ALWAYS snaps down the middle after about a day of usage. It never lasts more than a day, and I've been going through cotton like crazy. I'm currently running a 200w Sigelie Fuchai at about 75-80w, on a Velocity Clone RDA, with about 22 gauge...
  35. CrattleCrie

    What Gage Wire and help looking for an RDA!

    I've been vaping for 3-4 months now on my 150w Temp Controled Sigelei, with a Arctic Tank with Samsung 25r 18650s. So now I'm thinking I want to go for more of a build direction, I've looked videos on building them and it looks way to simple (coming from a engineering background) to do it myself...
  36. Lorenzo_93

    Coil and build help

    Hello. I'm just getting into doing my own coils and what not. Im a noobie so please bare with me. I have a general understanding of how they work. Thicker wire takes longer to heat then the thinner wire. The higher the gauge the thinner it is etc. But i have a Kanger Kbox Mini with the subtank...
  37. B

    Danger of Vaping with Nickel Wire (Ni200)

    Hello people, I just happen to like this man's videos and thought to share it with everyone. Hope you like it. Enjoy.
  38. Vapor_Citi1776

    Clapton coils

    I wanna start building claptons. I have a good amount of wire both kanthal and ni200. I have 22,24,& 28 gauge kanthal and 30 and 28 gauge ni200. If I want to build a Clapton can I use both kanthal and ni200? Is it ok to combine them? Like a 22 gauge kanthal and 30 gauge ni200? Or maybe even 24g...

VU Sponsors

Top