battery

I have a Think Vape Panzer box mod and my battery recently went out. Does anyone know where I can get a replacement? I've tried some surface google searching but with no luck to any that would fit and with the right connections. I tried contacting the vendor but have not received a response. Any...

Hello, Greetings, I want to buy a 18650 battery charger but they are really hard to find in my country and pretty expensive as well. But I found this little circuit board that claims to charge 18650 batteries with a 5v 1a input. And it is dirt cheap at less than 1 USD including shipping.I want...

Hi, I have a new Tobeco Supertank Mini. I replaced the flavorless and cloudless and constantly spitting Joyetech Cubis. The Supertank has awesome flavor and OK clouds, the best flavor I've ever experienced. Rich, subtle and deep. However, my battery's been lasting 4.5 hours on a Coolfire IV. I...

hello all, I am currently vaping kangercech EVOD mega with Nautilus mini and today I visit my friend, bit experienced vaper...so he make me interested in RTAs (Rebuildable Tank Atomizers). thing is I was using one of his modes on 20W with typhoon 2 (or something like that) and I love it. so now...

This is a real life, non-technical review of several popular batteries in the vape industry. The tests cut out all the complicated graphs and figures usually associated with battery tests and got right down to the bottom line: how much juice the batteries can vape before they go dead. These...

Hi all, I'm new to mods. So far I've been using Ijust2 kit and ordered Rx2/3 with smok v8. Need help in selecting a battery for the above and website where I can buy them. Also, is it really required to buy a charger or charging with the cable on mod good enough. Thanks in advance:)

Hey guys, First I wanna thank you for replying quickly to my last question on here. I've just put them on to charge got new batteries but for some reason, the normal charge screen will switch to a large exclamation point and what looks like charge bars. It did this with the first set of...

The biggest problem facing the vaping industry is the bad publicity of a vape blowing up due to the lack of battery safety knowledge by the user. Then the video goes viral and becomes a free propaganda video for big tobacco. This is a very in depth and thorough guide...

Hello i am sorry if this has been asked and sorry for the stupid question. My question is that if my setup requires lets say 40A and my battery only has a limit of 30A but i have 2 of em on the mod does that make it okay? I mean 30+30 sounds like 60 but i have no understanding of how electricity...

Hi there! I have an old Joyetech Ego One that I plan to give to a friend. Now, the question is. Does anyone know the Ohm range on that battery? It's the 2200Mah version and the tank that came with it (That's long gone) had two coils. One 1.0 Ohm and a 0.5 Ohm. I got a new tank that I tried on...

Been vaping this mod for a few months now in a couple of weeks it showed up but didnt look that bad went into a vapeshop and asked about it they said its natural and u just need to clean it with an pen eraser. Tried it and it got kind of clean but now its bothering me alot cause i keep getting...

Online Battery Sale! http://www.wcvaporcompany.com/sony-vtc3-1500mah-30a-high-drain-18650-battery/

So I've got an RX200 that I ran with 3 18650 batteries for a month or so and never encountered any issues other than battery life. All of them are 3.7 volts but one is a 3000mAh 2800mAh and 2500mAh. Just wondering how close I was to a hand grenade?

http://www.wcvaporcompany.com/sony-vtc3-1500mah-30a-high-drain-18650-battery/

OK so my boyfriend has a limitless matte black copper mod and the griffin 25 plus atty. He runs a dual build and has the LG brown and yellow batteries. He seems to have to change his batteries often. His question is what's a good build and what it should read (ohms) that won't drain his battery...

I just got a Dovpo Punisher 80 a couple days ago. It's my first mod and everything seems to have been working fine but a little while ago I retrieved it from my jacket pocket and it was very warm to the touch and the battery that was almost full 6 hours earlier was dead. I don't know the brand...

So as of lately I was thinking about buying the Smok alien kit which is a big step for me since I only had AIO kits and they werent as strong as this one. 1 thing I'm not exaclty sure about is cells or should I say batteries. So any cell which supports 18650 batteries should be good for it right ?

Hello everyone, Greetings, I am quite new to this forum and vaping in general. I own an ego ce4 and would like it to last me longer than it does,and for that reason I want to switch out the battery in it.I will have to zip tie the battery to the outside of the housing as it obviously won't fit...

Hello I'm building a dna 250 mod i want to use my gens ace traxxas 5000mah 11.1v 3s 50c~100c battery. Can the dna chip safely operate, fire, adjust, and charge if i use this battery. If not what is the max mah, max continuous discharge, max bust discharge battery i can use?

Seen this Review, I was considering this box but I am reconsidering, I'm sure I'm not the only one who accidently put in the batteries the wrong way, but didn't mind because on reverse polarity protection. I know "just pay attention" but still. does any one have any experience with this box?

I'm Want to buy the smoktech alien 220w tc and need battery's. it says it needs 2 18650 battery's. what kind should I get? I'm buying them from vaporDNA.com.

Not exactly sure if these are new new to the market, but i recieved an email from imrbatteries.com today for new arrival products. In their websites product description: Brand: Sony Energy Model: US18650VTC5A Size: 18650 Chemistry: NMC Nominal Capacity: 2600mAh Nominal Voltage: 3.6V Discharge...

I made a charger with tp4056 for each cell, charge at 1A, is this safe?

By knowing the actual capacity of a new battery, we can know whether the battery is overstated. By knowing the actual capacity of some used batteries, we may also know when the batteries are in need of replacement before anything strange happens. So how do you figure out the actual capacity of...

Ordered these from eBay, they look legit except the battery rap has started rip slightly (very small but fear will get worse. Also some of the battery serial codes are the same? Contacted seller he is willing to give me 2 new ones but the red flags are he listed them as "genuine LG".

I have a MVP 3.0 and I'm not making contact with any atty. It's spring loaded so I'm wondering if the spring is worn down or if I can unscrew the top off and see what the heck is going on. It's fully charged.

Purchased 200 cells from IMR last month for electric cart project, never completed. Cells are brand new still in boxes. Paid over $5.50 each, willing to sell for $4.00 each. Send PM for more details.

The SubOhm is $45 on sale which is a 2,000mah battery charged by ego usb. The CF Mod takes an 18650 and voltage can be regulated at the bottom but is only $34.99. I don't get it. Any experience with these? I have 10. I'm freaking out thinking I should return/trade for the CF Mod. They both...

Not sure if this is the best place to post this but couldn't find anywhere better. I am not a modder by any means. My building stops at coils. But I just got a Tesla Invader Mini for really cheap and the batteries (dual 18650) are very difficult to remove. In case it's not obvious from the...

Hello there! I'm new here so I do not know if this is the right place for this question. But still, I have heard that if you use the Raptor 120w chip for a box mod you will fry it if you put the batteries in the wrong way. Is this right? If so, how do I do so that the mod does not work...

Hello VU! This is my first post here but I had a quick question about Mech Mods in general but more specifically the particular one I recently ordered. After a few buddies of mine recommended I get a tube mod I decided to take them up on it and look into buying a clone. I ended up going with the...

18650 3000mAh 20A High Drain Orbtronic IMR Two 3.7V Batteries-Flat Top-Battery Protective Case included After searching for batteries I saw "Dimiti" using in a review he did a few years ago, I couldn't find the exact ones he touted about, so I started asking around. Several recommended the...

I am making an assumption that all DNAs (with same settings) have the same battery life.....i am assuming it is the chip that determines this. I just got an Efusion Duo DNA200, and am using 18650s. I was using a Sigelei 233w. It seems to me, using the same wattage (50w), that the Efusion is...

Basically, a battery of mine seems to have become no good. I do vape very low with these batteries (around .12-.14) but they definitely have appropriate specs, and I only use in my parallel mech in this case. Everything seemed OK while vaping but when I went to put the batteries in the charger...

Hello guys how you doing..So I'll be a bit straightforward,about 2 weeks a go i got a tesla nano 100 steampunk and a new tsunami rda..Really smooth,not that great battery life but still decent. Yesterday i put it on charging over night and i go in the morning to unplug it and it showed like...

Hello! I am new here but have done alot of research and attempted many solutions with no resolve. Basically I have the reuleaux dna200 and it works great! But as of late when I leave it sitting and idle for about 20m or so it won't fire back on. This started happening after I used Escribe to...

Has anyone else ever caught there cotton on fire by accidently burning it too much...... I did....

Okay so I just got the smok h priv (reg box mod) and i put a rda on it, so I use two 18650 batteries 20 amps each. Im just confused on how to stay within the amp limits, could someone please help me better understand? Since I have two batteries does that make it 40 amps all together?

OKAY, so i have an ijust 2 and it only came with the usb cable to charge, what should I use as the wall adapter?

So I have an eleaf Ijust 2, I just want to know if ill be safe charging it overnight with the usb it comes with in a iphone wall charger. Thanks! Like is it supposed to stop at a certain point because its regulated i think.

Hello everyone, I am enjoying my first set, a Kangertech evod battery with an aspire can, I got this set like two months ago, but I noticed some dark spots on the surface of my battery, should I get worried about that? The battery works normal and it doesn't gat any hot while vaping, I will...

I bought two new mods and a fresh set of 18650s but my atomizers aren't working. They're old but were never used or opened. The mods are both pretty advanced 1s the Heatvape invader mini and the others a BEC Pro by Smok. I'm thinking maybe do they require a special quality of atomizer? The...

Hey im about to buy a 0.5 sub ohm tank, and i have a Justfog normal battery, (sold with a 1.8 ohm clearomizer). What will happen if i use the 0.5 subohm tank on that battery? (edit) So what will happen if you connect a battery, which probably doesnt support sub ohm, to a sub ohm tank? battery...

Hi Guys, I'm having a strange battery issue since yesterday. I connected my Reuleux DNA 200 Evolv via USB and fiddled with a few settings in EScribe in an attempt to optimize my build. I followed the advice of several guides and didn't get too deep into it. I mainly just adjusted the Capacity...

Hello ! I'm a socalled newbie here, i own an ijust 2 since 3 months, now i want to step up a little bit. I want to buy the wismec rx200 or rx200s and i read so much forums and posts, but i did not find anything statisfying info about the batteries. So, my preferable tank what im going to buy, is...

So I'm looking to use a Turnigy 2.2 (2200mAh, 20C, 44 M.C.D., 11.1V) 3s Lipo to power a DNA 200 chip with a .2 ohm coiled tank. 11.1V /.2 Ohms = an actual discharge of 55 Amps, which exceeds my maximum discharge rating of 44 amps. Does the DNA 200 automatically protect itself? I know that I...

Hi everyone I'm a bit new to vaping and I love it but I have an evic vtc mini with a cubis tank running an ni200 coil at 0.24ohms 26watts in variable temp mode and the standard battery is pooh I've seen a LGMJ1 3500MAH 10amp/20amp 18650 but I need to know if this will be safe enough for my evic...

Take this to a vape meet.. I dont think you will need batteries for the entire trip! LOL https://www.anker.com/deals/powerhouse?ic=8586f0d8590746ea59f8

I got myself a lg he4 20a 18650 battery. I also got a power bank ehich can charge things with 1 and 2 A. Is that safe to use? I connect the power bankto the kbox mini 75tc. I got the normal charger which charges az 500mah. Is the 1-2 A to high?

I'm new to vaping and I'm about to buy my first mod (target vtc 75w) and I wanted to know If this battery I picked up was good for it .....the battery is a 18650 3.7v 2500mah