rba

Aegis Legend by Geek Vape kit has a mesh coil tank with regular coils and mesh coils. I was wondering if the baby beast coils are compatible? And If I can use the RBA coil with this tank. I do not want to buy coils i want to rebuil my coils. What SMok coils are compatible? Or if so which one...

I am building a RBA it for a very first time. its 4/3 wrap on Pre loaded Coil. 0.6ohm on 22w I am using 80/20 Juice. I want to know that Which RTA is best for Kangertech Subox mini and wire for RBA to make a good clouds.

Hey there I am using a kangertech subox mini on rba with 0.5ohm on 22w Am I able to do Clouds on this device?

Hello, firstly I would like to say hi to all fellow vapers ;) Secondly I wanted to ask people more experienced than me for an advice, ive been vaping for quite a while now and fell in love with SMOK products and their tanks so first of all i was using baby beast which was great but I wanted...

Next month I’ll have around $250 to spend on better equipment, so I’m buying some Sony VTC6 batteries, since I was sold shitty Efast batteries from the local vape shop, go figure. And I want to split the wattage over 4 batteries so I feel safer when I vape. So What’s the best Quad mod I can...

Can anyone help me, I put two Prebuilt Skynet - Clapton Parallel coils (26AWG*2 +39+26AWG) Ni80, 3mm id, 5/6 wraps. in the TFV8 RBA, Ohms reading 0.11 to 0.17, is that ok? Vaping at 75 to 80 Watts. I’m using SMOK Alien 220w mod with Efast batteries ( 3000mah 35A 3.7V). From what I read...

I bought a new tfv8 about 2 weeks ago worked great. Then I decided to try out the rba deck also worked fine. Then I swapped out the claptons that came with the rba for some 28g kenthal 7 wrap coils dual build. Worked great for probably 2 more weeks or so. Then I started getting really harsh hits...

Hey Guys, I recently broke my TFv8 Big Baby RBA Glass and I am unable to find a replacement, in United Arab Emirates. I looked around and nobody seems to have it. I am back to my regular coil. I tried looking at online stores but nobody seems to ship those to U.A.E and even if they did I am...

So, i bought the rba-t and it doesnt fit into the tfv12 base properly. It cannot seem to touch the pin, looks like its too big. Anyone know or have heard of this before?

On all vaping websites, they talk about Ohm’s law and the simple P=V^2/R so lower resistances generate higher powers and therefore we will need to vape that lower resistance coil at a higher power. Simple. So why do some people vape a 0.1 ohm coil at 75W and if they increase the wattage it...

Really ? What is the difference between the TFV12 rba and the non rba? Tfv12 Rba: 2 rba coils Tfv12: 3 non rba coils? I firstly bought the tfv12 rba, but i waited over a month for the preorder and didnt get it. So i changed over to another website and found Tfv12 on flash deal. Now as its non...

Hello Everyone, my name is Karol and it's my first post here. ;] I've got a TFV8 tank and rx 2/3 for about 4 months and generally I'm very pleased with that, but there's two things with TFV8 which annoy me. One is leaking problem. It doesn't happens so often but still I don't like to have...

Okay so I just ordered the brand new smok gx350 and ive never had that much wattage before that shits insane regardless I need to know what sub ohm tank to pick up until the TFV12 is released that can handle the wattage. Also if I were to run an RBA how does that even work I can build them and...

Hello my name is Joseph and I am messaging in regards to my Uwell Crown RBA. A few months ago I had bought RBA equipment and organic e-liquids. At the store I had help with getting me set up with my mod. After a few weeks of the coil and cotton wearing out, I had attempted to make my own coils...

Hello my name is Joseph and I am messaging in regards to my Uwell Crown RBA. A few months ago I had bought RBA equipment and organic e-liquids. At the store I had help with getting me set up with my mod. After a few weeks of the coil and cotton wearing out, I had attempted to make my own coils...

Hello my name is Joseph and I am messaging in regards to my Uwell Crown RBA. A few months ago I had bought RBA equipment and organic e-liquids. At the store I had help with getting me set up with my mod. After a few weeks of the coil and cotton wearing out, I had attempted to make my own coils...

I've look all over internet and couldn't find a definitive answer on this what watts can the xl 2 rba handle

Includes: Black Smok TFV8 Baby Beast (2 new coils included) (9x) V8 Baby-Q2 coils (0.4ohm) V8 Baby RBA Deck $46 Shipped All items are Brand New - If these sell over the weekend, they will ship on Tuesday due to MLK day...

I've been wrestling with my vape for 4 hours now! (Literally...sadly). I've rebuilt my rba at least 7 times and am having less than stellar results. I'll start by listing a bunch of facts: -I've been using this nebox for 3 weeks now without troubles, with the pre-built ni200 and Ti organic...

Hi guys, so i was looking at this Tfv8 atomizer by Smok and was thinking to buy it but i want to know what wire i should use for rewiring the RBA? i have tried calculators but i dont understand how to use them. If someone could find the correct wire for the Turbo RBA head 0.28OHM i would be...

Whats up VU? I have a quick question for you all. I have a Wismec RX 2/3 on the way and I am looking for recommendations on tanks and RTAs. I know that they have the shorter 510 connection so I'm not 100% sure on which brands and tanks/rta's will be best suited to the mod. I had a Cuboid and...

Whats up VU? I have a quick question for you all. I have a Wismec RX 2/3 on the way and I am looking for recommendations on tanks and RTAs. I know that they have the shorter 510 connection so I'm not 100% sure on which brands and tanks/rta's will be best suited to the mod. I had a Cuboid and...

So, let me tell you guys a little lesson about the TFV8 RBA that I just learned the hard way. I got my TFV8 about a week and a half ago. After using the Griffin 25mm, which I learned has very week screws that strip very easily making it completely useless, I was really excited about the RBA...

hi,vapers,all smok TFV8 coils avaliable, V8-T10: decuple coil,resistance 0.12ohm,best working at 130w-190w V8-T8: octuple coil,0.15ohm,best working at 120w-180w V8-T6:sextuple coil,0.2ohm,best working at 110w-150w V8-Q4:quadruple coil,0.15ohm,best working at 90w-150w V8-X4:quadruple...

I got a 50w battery and a few atomizers that are factory built for 50w and up, so 50w pretty much doesn't cut it. I'm planning to rebuild the atomizers to work for my 50w range batteries. My 26awg Kanthal is coming in the mail but I'm tempted to order some 50w range Clapton as well. I got some...

This is awesome. GREAT way to brush the crap off of your builds. $1.99 http://www.3fvape.com/misc/11883-cleaning-tool-brush-for-rda-coil-silver-stainless-steel.html#.WAE_XuArI0E Someone may have posted this a while back. I bought some! :) (I am not selling nor do I have any financial...

Guys I need help please... I really want the below RTA for my future Kato mod but I have no idea what its called. Please if you know its name, kindly reply here. Thanks so much in advance Second one from the right (Beside the black tip one)

Hi all, I have the Kanger Topbox kit and am currently using the mini RBA that came with the kit as my coil. The guys at my local vape shop built it for me (ahead of the FDA regulations going into effect - I made sure of this so I could see how to do it in person at least once and ask any...

Is it just me, or does the Herakles Honor look awesome. It may have come out at any point in time, but I'm seeing a 9/10 rating for it. I like the heat dissipation too. Quite nice, actually. A bit wide in mm, but we can all accommodate that, right? China - $21.39 vs. US Seller at $22.49...

Dear VU members, This is Doris from Focalecig. It is our great honor to have a sub-forum here. Focalecig is an online store based in Shenzhen offers free shipping worldwide. We are confident to compete the price with other competitors, but we are confident with our service. We wish to be your...

Okay so ive been posting a lot lately, but only because this forum is awesome and everybody is great! So bare with me haha. So i want to get the Smok H Priv box mod, its regulated and i want to put an RDA or an RTA on it. Since im sort of scared of unregulated mech mods, i want something that...

So im looking to buy my first rebuildable mod..... Im looking for a mod that has great flavor instead of big clouds, I dont want one that will burn up all my E Juice. My budget is around $90. Thanks everyone! I love this forum!!!

Just applied "HAPPY" to shopping cart to get it 10% discounted.

Hey Vape Family ! So you probably going to laugh at me, well i can understand. Got a couple of questions here where i hope to get some help with! So first things first, my Setup: Eleaf iStick TC100W with Herakles Plus Sub Ohm Tank (0,2Ohm Coil Ni200). Well, since i started making my own...

I have the subvod mega tc tank I use on the Kbox70.. and so I finally decided to start the process of using the mini rba that came with the set. I went back to the store for help building the coil it tasted great and made clouds like a sub-ohm should of course. So here's the problem I went to...

So i wanted to try the RBA but i cant unscrew the screw to put the cotton in. Me and my friends all tried it but im scarred i will ruin the screw eventually. I just simply cant put enough presure on that little screwdriver and i dont have a bigger one with that little tip. Do you guys have any...

Does anybody know of one that is compatible with the Super Tank? The Atlantis RBA looks like it might work, but I'm not sure. Any help would be appreciated. Thanks!

Does anybody know of one that works with the Super Tank mini? The Atlantis RBA looks like it might work but I'm not sure. Any help would be appreciated. Thanks!

Does anybody know of an RBA that works in the Tobeco Super Tank mini? Either way I'm going to buy a Super Tank mini, but if there is an RBA which is compatible with it I'll consider it a big plus. Thanks.

hey gals/guys, I recently posted a semi-lengthy three about a new Kangertech TCP build that I was toying with the last couple weeks, I don't wanna clog up the post with a quite since it was so pic heavy, but here's a link and a pic...

My wife and i are in love with our NEBOX's, not only are they the first cigs we had that were rebuildable, but because they can really give an awesome vape, we now have all four of them. The factory coils are lacking, in my opinion, maybe because they have so little cotton or because it's just...

What are your personal pros and cons of each? Is there one style that is better than the other in everyones experience? So I've used both styles of wicking and personally really like the Scottish Roll Wicking. I don't get drastically bigger vapor production but I can definitely tell there is...

Hey im getting a vape & thinking about getting the joyetech evic vtc mini with a kanger toptank mini, anyways according to many reviews the joyetech eats battery in wattage mode due to puff counter etc, so im wanting to use it in TC mode but theres only titanium and nickel for tc mode options on...

I purchased the Subox Mini Kit and have been happy with buying the vertical coils but now want to try out the experience of making my own coils (save some money too). The kit came with a RBA deck and now I'm looking to buy the gear for it and feeling a little overwhelmed. Is 26 gauge Kanthal...

I just got my TFV4 mini kit, and right now im using the CLP2 coil that came in the tank. I really want to get the RBA base working though. It has a spaced Clapton coil in it and I was hoping someone could enlighten me if it was better for flavor than a contact Clapton. I have Clapton wire but...

Hello guys, I got a subox mini v2 with the rba etc... I want to make my own coil to sub-ohm I don't know what kind of wire should i use, when i use the coil calculator for a Kanthal A1, to get a 0.5 it says 2/3 wraps and some mm long cable which looks pretty weird to me and unfeasible. can you...

I work at a shop, and i have to do tons of build. After months now of ripping up my hand and wasted wire from mess ups. I finally designed and 3D printed a Clatpon Jig Rig that will make endless clapton wire for you :) Video: Site for more info on Clapton Jig Rig: www.Vaped3D.com Let me know...

Here's my first dual clapton on my crius. 26 gauge nichrome and 38 gauge kanthal. 5 wraps each came out to .15 Ohm according to me joytech VtC. Maybe because of power or wicking but I had more flavor with a single clapton. It definitely chucks clouds.

As the tittle states, I am looking for a new gear set up. I have 70-80$ USD for my budget. Looking for a regulated device and tank combo that will give me a bang for my buck. Right now I am using my Kanger Subox and Subtank Mini combo. I've pretty much been using this thing exclusively since it...

I wanted to make a thread that I could post all of my own builds on, I will add to this thread as I go and welcome any feedback or ideas to inspire builds. Thank you for checking it out! I have sectioned off the thread in parts so it wasnt unorganized, RDA Section, TFV4 Section and Wire Lengths...