iJOY Asolo 200W, A mod taste control all wires includes kanthal/stainless steel

[gracechen]

how do other temperature control do the control?

When you get less amount of juice on your wick it will get hotter. The chip will keep the temp at a constant rate and not allow the coil to heat up and burn your wick.

but for Asolo, we care more than the wick, but also care how will be the vapor experience.

vaping experience is much more important for the vapers.

and taste is the most important factor, offer the constant rate of good taste, ONLY IJOY Asolo can do for you.

 

[st0nedpenguin]

If the wick is drying out either you reduce power or let it vape dry, there's no magic you can perform to avoid this.

But regardless, as long as wicking doesn't suck then other devices will handle pushing 45w to the coil just fine.

 

[gracechen]

we have e-liquid refill reminder to remind the user to refill the e-liquid on time.

 

[f1r3b1rd]

Chief is that you being a lurking lurker?????

 

[CurlyxCracker]

If that was the basis for you calling her a liar, you should probably apologize right now. They wait for the patent application to be officially accepted after the long application process. Then the product is released as "Patent Pending" almost always with the patent being awarded eventually months if not years later, if a patent is indeed awarded.

Just thought you would want to know as you appear to think you have the right to know how the device in question operates. And you assume it doesn't, because you think you know enough to know it can't.

Based on the information posted earlier about an "international patent" there is no such thing. The basically have to apply for a patent in every country they wish to have it patented.

 

[CurlyxCracker]

we have e-liquid refill reminder to remind the user to refill the e-liquid on time.

Can you explain how it does this since you previously mentioned there is no sensor of any kind? In WORKING temperature controlled mods the wire IS the sensor.

 

[Fringe]

Chief is that you being a lurking lurker?????

Yep

I don't think I ever posted in here

 

[rdsok]

we have e-liquid refill reminder to remind the user to refill the e-liquid on time.

And others say that the coil is dry which is saying basically the same thing... so the eliquid fill reminder isn't anything new, just different wording for the same function.

 

[f1r3b1rd]

Dude!!!!!!!! Gonna have to find thread or a pm to chat, don't wanna derail this fine example of online communication

Yep

I don't think I ever posted in here

 

[Fringe]

I been trying to catch up on what is being said about Temp control.

 

[f1r3b1rd]

I been trying to catch up on what is being said about Temp control.

Well, this one is set up by fairies and aliens as far as we know. The modders wont answer any questions until we give them a hint

 

[5150sick]

i didn't do anything but some of the men say me a lier and ijoy company a lier? do we done something wrong after give this news item Asolo idea to pulic?

Don't take it the wrong way.

I am genuinely interested in your product.

Even more so if it's the revolutionary product you say it is.

I'm even interested if It's a regular properly working temp control mod and I can get it for a decent price.

But at the same time I do understand why some may be are doubtful.

We wouldn't be still in this thread if we weren't showing interest.

I think we both know that

 

[CurlyxCracker]

Don't take it the wrong way.

I am genuinely interested in your product.

Even more so if it's the revolutionary product you say it is.

I'm even interested if It's a regular properly working temp control mod and I can get it for a decent price.

But at the same time I do understand why some may be are doubtful.

We wouldn't be still in this thread if we weren't showing interest.

I think we both know that

That's true. Personally even after the run around responses. I'm interested in how this will actually do in the market.

On another not ijoy may not be taking any funds atm. But vendors certainly are for pre orders. Some people will believe anything they're told I assume At least a grand was spent already on pre orders, at least.

 

[5150sick]

Based on the information posted earlier about an "international patent" there is no such thing. The basically have to apply for a patent in every country they wish to have it patented.

BINGO!

 

[f1r3b1rd]

BINGO!

thank you both!!!!
I knew it wasn't a brain imjury

 

[5150sick]

That's true. Personally even after the run around responses. I'm interested in how this will actually do in the market.

On another not ijoy may not be taking any funds atm. But vendors certainly are for pre orders. Some people will believe anything they're told I assume At least a grand was spent already on pre orders, at least.

You mean in the entire world?

You better believe ten, maybe twenty grand is sitting in multiple vendors' accounts for something that may be released in a month.

Dozens upon Dozens of times in the past one little kink in the plan (one software bug, a hold up in customs on certain parts, longer than usual shipping on multiple parts from multiple different sources in multiple countries, etc...) and that one month wait can very easily become 6 months.

Ask a few guys in here:


https://www.facebook.com/groups/NotRecommendedVendorsAndProducts/

 

[CurlyxCracker]

You mean in the entire world?

You better believe ten, maybe twenty grand is sitting in multiple vendors' accounts for something that may be released in a month.

Dozens upon Dozens of times in the past one little kink in the plan (one software bug, a hold up in customs on certain parts, longer than usual shipping on multiple parts from multiple different sources in multiple countries, etc...) and that one month wait can very easily become 6 months.

Ask a few guys in here:


https://www.facebook.com/groups/NotRecommendedVendorsAndProducts/

Really you think it's that much? More people with money to blow than I thought!
And trust me only one pre order I've done has gone smoothly without any issues! I'm not in the pre order game any longer. I can wait... Meaning for the product to come out and be reviewed, not for a pre order lol

 

[Mike H.]

IF a patent is in fact being processed then exactly how it works will remain silent and i would keep it my personal business as well untill i made my money with it...Im still sure every clone company will get their hands on one and we will see cheap clones of it, providing they figure out how it works properly..If they do then we will have good clones.

Did i mention yet i love the battery amp draw gauge ?

 

[CurlyxCracker]

IF a patent is in fact being processed then exactly how it works will remain silent and i would keep it my personal business as well untill i made my money with it...Im still sure every clone company will get their hands on one and we will see cheap clones of it, providing they figure out how it works properly..If they do then we will have good clones.

Did i mention yet i love the battery amp draw gauge ?

Dude seriously? Clones WILL be made, more so if it actually works.... This is China we are talking about, they'll clone it.

 

[f1r3b1rd]

The clones are already on standby

 

[CurlyxCracker]

The clones are already on standby

Standby? Probably already in production, lol

 

[f1r3b1rd]

Standby? Probably already in production, lol

That's what im saying, waiting for the formal release so the clone can come out the next day.

 

[CurlyxCracker]

That's what im saying, waiting for the formal release so the clone can come out the next day.

Haha, if we are going to push back the June 25th release (which I've seen COUNTLESS times for pre orders) they may just release the clones before the original, which has also been done for some devices)

 

[f1r3b1rd]

Haha, if we are going to push back the June 25th release (which I've seen COUNTLESS times for pre orders) they may just release the clones before the original, which has also been done for some devices)

Roger that, aqua v2 comes to mind.

 

[CurlyxCracker]

Roger that, aqua v2 comes to mind.

Kayfun 4 too I believe

 

[f1r3b1rd]

Kayfun 4 too I believe

Jahaha yeah the most complicated rta took 36 hours to clone. Haha

 

[5150sick]

That's what im saying, waiting for the formal release so the clone can come out the next day.

Shit, The same company is probably selling the legit and the clone under a different name.

Don't think that type of shit doesn't go on.

I have heard of high end mod and atty makers with their hands in both cookie jars.
It makes sense.
The high end mod only hipsters are fighting over a $200 product with a low serial numbers and cheap asses like myself are jumping on their mass produced lower quality, cheaper metals, shitty QC $20 clones.

They have both markets cornered while screaming "fuck cloners" all the way.

He becomes rich and his douchebag hipster credit is still intact with the snobs who look down on those that can not afford or think it's really stupid to buy a $500 mod/atty setup.

 

[5150sick]

Roger that, aqua v2 comes to mind.

Remember the 2nd Stingray mech with the thick 2 tone engraving at the button end?

The clone came out a full month and a half before the legit hit the market.

 

[CurlyxCracker]

@5150sick, idk if it was in this thread you posted about it. But in reference to ijoy being served at ECC. Fuck those vaping elitist! I own both clone and authentic gear for three reasons, I've bought FAR too many devices I didn't like to be spend upward or $100 on an authentic rda for example. More for mods. 2nd, some clones are better and more refined than the original. And if I'm truly amazed by a product (normally I already have the clone) I will buy the authentic just because I'm amazed by the innovation and how well it works. And as a forth I don't really count, some people simply can't afford to spend that kind of dough for a quality vape. And OMG the PIF scene wouldn't even be a thing if it weren't for clones.

 

[CurlyxCracker]

Shit, The same company is probably selling the legit and the clone under a different name.

Don't think that type of shit doesn't go on.

I have heard of high end mod and atty makers with their hands in both cookie jars.
It makes sense.
The high end mod only hipsters are fighting over a $200 product with a low serial numbers and cheap asses like myself are jumping on their mass produced lower quality, cheaper metals, shitty QC $20 clones.

They have both markets cornered while screaming "fuck cloners" all the way.

He becomes rich and his douchebag hipster credit is still intact with the snobs who look down on those that can not afford or think it's really stupid to buy a $500 mod/atty setup.

I forget the mod, maybe the Manhattan, the manufacturer started making "clones" (exact same product, from exact same manufacturer) because ameravape or whatever that shit company was owed him money. This proves, at least imo, this does happen. Especially in China! Yes China has been making their own devices, and I can almost guarantee the clones role of the same line.

 

[CurlyxCracker]

Remember the 2nd Stingray mech with the thick 2 tone engraving at the button end?

The clone came out a full month and a half before the legit hit the market.

I was trying to think of the mod that did that, thank you!

 

[f1r3b1rd]

Shit, The same company is probably selling the legit and the clone under a different name.

Don't think that type of shit doesn't go on.

I have heard of high end mod and atty makers with their hands in both cookie jars.
It makes sense.
The high end mod only hipsters are fighting over a $200 product with a low serial numbers and cheap asses like myself are jumping on their mass produced lower quality, cheaper metals, shitty QC $20 clones.

They have both markets cornered while screaming "fuck cloners" all the way.

He becomes rich and his douchebag hipster credit is still intact with the snobs who look down on those that can not afford or think it's really stupid to buy a $500 mod/atty setup.

Hahaha!!! I use both, but when it comes to regulated mod there's a lot more to it than a piece of pipe. I had the hcigar mini 35w and that was a quality Built piece while the ipv2???
Better yet the infinite stingrayx clone is much nicer than the jdtech authentic.A guy with the authentic saw my clone and was having mod envy over the button throw and engraving.
In other words its a build quality thing, typically though, if its 100$ or more I test the clone then buy authentic for mods my price cap is 200$. Now a days though, there are so many affordable authentics out there its awesome. shit, this month I picked up the twisted messes authentic for 45$ and a billow2 for 35$ both perform beautifully and the tank especially blows away my pricier authentic gear really its more of a buy smart thing, especially in the regulated mod market, one bad solder point or off gauge wire and you're holding a paperweight ....if you're lucky ,

 

[CurlyxCracker]

Hahaha!!! I use both, but when it comes to regulated mod there's a lot more to it than a piece of pipe. I had the hcigar mini 35w and that was a quality Built piece while the ipv2???
Better yet the infinite stingrayx clone is much nicer than the jdtech authentic.A guy with the authentic saw my clone and was having mod envy over the button throw and engraving.
In other words its a build quality thing, typically though, if its 100$ or more I test the clone then buy authentic for mods my price cap is 200$. Now a days though, there are so many affordable authentics out there its awesome. shit, this month I picked up the twisted messes authentic for 45$ and a billow2 for 35$ both perform beautifully and the tank especially blows away my pricier authentic gear really its more of a buy smart thing, especially in the regulated mod market, one bad solder point or off gauge wire and you're holding a paperweight ....if you're lucky ,

Dude, I love my segelei 100w Plus, but was looking for something more portable and still provide a decent amount of power. I spent $26 Shipped, for a smowell dvp-50 (single 18650 50w). It's small, about the size of an 18650 4nine a little more depth because of the chip/charging board, not by much though less than the zna protrudes. Holy fuck, I love this little thing. We're talking less than $30 shipped for an original authentic 50w mod. Prices will need to be more competitive, I think for something that provides something innovative my cap is $150 after purchasing this. Had it only a month but great little device. Shit I paid 80 some dollars shipped for my Hana clone!

 

[f1r3b1rd]

Dude, I love my segelei 100w Plus, but was looking for something more portable and still provide a decent amount of power. I spent $26 Shipped, for a smowell dvp-50 (single 18650 50w). It's small, about the size of an 18650 4nine a little more depth because of the chip/charging board, not by much though less than the zna protrudes. Holy fuck, I love this little thing. We're talking less than $30 shipped for an original authentic 50w mod. Prices will need to be more competitive, I think for something that provides something innovative my cap is $150 after purchasing this. Had it only a month but great little device. Shit I paid 80 some dollars shipped for my Hana clone!

My gold purchase was an ipv70, if memory serves I paid less than 60$ for it shipped, and that was a US retailer. I was about to drop my limit then the sxmini 'm' was released. for the way I vape, the perfect mod. I'm in the minority and kind of dig the optional battle axe over needing the girth. Ha ha I rarely go above 50w when I do its 80-85 with the axe.
I was looking at those 50w mods to have as a grab and go type thing but, I have a couple of rdna40s and mechs that fill that roll. In fact unless a new tech comes out, I'll window shop and pick up a few deals here and there but probably hold off until the DNA 70/200 comes out and I'll do a board swap, assuming the screen works

 

[CurlyxCracker]

My gold purchase was an ipv70, if memory serves I paid less than 60$ for it shipped, and that was a US retailer. I was about to drop my limit then the sxmini 'm' was released. for the way I vape, the perfect mod. I'm in the minority and kind of dig the optional battle axe over needing the girth. Ha ha I rarely go above 50w when I do its 80-85 with the axe.
I was looking at those 50w mods to have as a grab and go type thing but, I have a couple of rdna40s and mechs that fill that roll. In fact unless a new tech comes out, I'll window shop and pick up a few deals here and there but probably hold off until the DNA 70/200 comes out and I'll do a board swap, assuming the screen works

I agree with you having the option to go to 200w Is intriguing. But Noone vapes regularly like that. It's a hey I have a 150w box mod, well mine is 200w so I beat you kind of thing. Even my recent regulated cloud competition I only did 85w. Sure I could see someone who vapes 85w on the regular, but 200w, that means nothing to me. I think 150w is more than plenty. I don't use temperature control, yet anyway, mostly I don't want to deal with nickel wire and I'm satisfied with my vape...

 

[f1r3b1rd]

I agree with you having the option to go to 200w Is intriguing. But Noone vapes regularly like that. It's a hey I have a 150w box mod, well mine is 200w so I beat you kind of thing. Even my recent regulated cloud competition I only did 85w. Sure I could see someone who vapes 85w on the regular, but 200w, that means nothing to me. I think 150w is more than plenty. I don't use temperature control, yet anyway, mostly I don't want to deal with nickel wire and I'm satisfied with my vape...

I'm normally a flavr chaser I like a thick dense flavorful vape all day which is why I enjoy the consistency of tc, same reason I didn't like pwm. But when I Feel like playing cloud machine, its a dual parallel build at 85w and those moments are getting less frequent,
Typically my adv is a tank with a tc Build in the 35-45 range around 480° and I always have an rda with me for those moments at work when I start realizing, the swamp is up the road and they have places to hide bodies. I just realized all my tanks except 1 are built with ni200. So are most of my rdas other than a handful
200w does not intrigue me, loll. I took the sxm to 150.....its just too much for me. I had a terrible gag reflex.

 

[st0nedpenguin]

200w in temp control mode is the most pointlessly absurd idea ever, you won't get anywhere near 200w before you completely negate the entire point of temp control in the first place.

 

[Mike H.]

Id never in a million years need or even want to try to vape anything at or even close to 200w...maybe if we get some 14g coil wire we will need it to get it hot but ,no thanks to 200w for me.

I cant see ever needing more than 100w for any type tank or RDA.

What i would like to see are better quality lower wattage (30 to 50w devices)...I like the Asolo battery amp draw gauge as mentioned..Id like to see better quality usb charging chips installed..Sort of mini versions of the xtar technology with battery charging info being displayed like the mah and volts as charging..Dual 18650 or some single 26650 in as "Mini" as possible sizes...More fancy LCD displays with maybe time and date features...Im just not all for this wattage race..whats next 500 watts?..bullshit.

My personal temp control is simply not over doing the wattage and building good wicks as well as not making juice too thick..I dont need TC personally to find my perfect vape.

 

[CurlyxCracker]

Id never in a million years need or even want to try to vape anything at or even close to 200w...maybe if we get some 14g coil wire we will need it to get it hot but ,no thanks to 200w for me.

I cant see ever needing more than 100w for any type tank or RDA.

What i would like to see are better quality lower wattage (30 to 50w devices)...I like the Asolo battery amp draw gauge as mentioned..Id like to see better quality usb charging chips installed..Sort of mini versions of the xtar technology with battery charging info being displayed like the mah and volts as charging..Dual 18650 or some single 26650 in as "Mini" as possible sizes...More fancy LCD displays with maybe time and date features...Im just not all for this wattage race..whats next 500 watts?..bullshit.

My personal temp control is simply not over doing the wattage and building good wicks as well as not making juice too thick..I dont need TC personally to find my perfect vape.

I'm just going to say I'll believe it when I see it. That said 14awg ni200 will need like 40 wraps around a 3mm "tool" to get to the usable range. And I'm being conservative. Even to operate 14awg kanthal safely you'd need at least 25 wraps. I'm pulling these numbers out my ads but 14 gauge is needed as much as 200w. And ever since cloupors bullshit, I assume the mod won't hit the full 200 anyway. Not that it's needed.

 

[Mike H.]

I'm just going to say I'll believe it when I see it. That said 14awg ni200 will need like 40 wraps around a 3mm "tool" to get to the usable range. And I'm being conservative. Even to operate 14awg kanthal safely you'd need at least 25 wraps. I'm pulling these numbers out my ads but 14 gauge is needed as much as 200w. And ever since cloupors bullshit, I assume the mod won't hit the full 200 anyway. Not that it's needed.

Yea, i just threw a thick gauge wire out there...i know the thicker the wire the more power needed to heat it quickly so just a possible example as to why someone would even think to use 200w to vape...Its not even close to a selling point for me..Anything over 100w and ill pass..Although i did get an email today for a new Sigelei 150w for $65.00...sigh.

 

[CurlyxCracker]

Yea, i just threw a thick gauge wire out there...i know the thicker the wire the more power needed to heat it quickly so just a possible example as to why someone would even think to use 200w to vape...Its not even close to a selling point for me..Anything over 100w and ill pass..Although i did get an email today for a new Sigelei 150w for $65.00...sigh.

I have pushed my 100w Plus to 100w on very few occasions. But, in no way can I vape at that high wattage. 150 is to obsurd as you're not maxing out the device but I'd wouldn't even try vaping at 150w.

 

[OBDave]

I'm still a page and a half behind, but I just have a simple request...if this magic unexplainable tech actually works, will the first clone please name their mod the TP4Bungholio? I'll pre-order 5 right now...

 

[Giraut]

[...]name their mod the TP4Bungholio? I'll pre-order 5 right now...

Wow, I'm so buying a mod that has TP4BungHolio written across it!

 

[cthulhufan]

That's true. Personally even after the run around responses. I'm interested in how this will actually do in the market.

On another not ijoy may not be taking any funds atm. But vendors certainly are for pre orders. Some people will believe anything they're told I assume At least a grand was spent already on pre orders, at least.

Yep, I want to see it too, until then it's just a lot of "blah blah" on both sides, with my vote going to the cynics. Pre order is for chumps. I want an oculus rift too, but I can wait for retail.

 

[f1r3b1rd]

l

 

[CurlyxCracker]

Yep, I want to see it too, until then it's just a lot of "blah blah" on both sides, with my vote going to the cynics. Pre order is for chumps. I want an oculus rift too, but I can wait for retail.

Wasn't that the one who partnered with Microsoft?

 

[gracechen]

Based on the information posted earlier about an "international patent" there is no such thing. The basically have to apply for a patent in every country they wish to have it patented.

ok, i think i need to make it clear, it is china patent, American patent and European patent. i am wrong, sorry

 

[gracechen]

thank you all the support, no matter good or bad, thank you

 

[CurlyxCracker]

ok, i think i need to make it clear, it is china patent, American patent and European patent. i am wrong, sorry

Making progress here.

 

[cthulhufan]

Wasn't that the one who partnered with Microsoft?

Don't think so, don't care. MS just bought out Notch. Oooh, Facebook bought up Oculus. Psh, whatevs..