coil

I'm using an XCube II, but this question is applicable to all variable mods that have the ability to set coil resistance, be they voltage, wattage, or temp control. My mod rarely reads coils at their stated resistance (ohm) rating. They almost all come in a little over or under where the...

Hello Vapors , Here is the winners of CoilART Giveaway : @eris667 @Ramsay Bolton @axelbeam @doc_iguana @mac63 @Ding @Morfio @Dawn0810 @reddhott @Roadtrip635 @Manimal3497 @OhmzRaw @vapinange23 @djkokalis @Bigbob2322 The origial thread ...

Alright, so I'm a fairly new builder and have only used .4x.1 ribbon wire. I had a 15-25' spool of it (its not in front of me, not sure exactly the length). But as much as I tried, I COULD NOT stack that wire! It was just too small and wouldn't flatten enough to lay flat and straight. Kinks...

Hello Vaping Underground I have a question regarding my TFV4 I was wondering, if I could use my quad coil for temp mode ? I have a Koopor plus 200W mod, if that makes a different :-) Cheers

(Haven't done the write-up tutorial yet; coming soon.) The Auto-Claptonator "If you can put on pants, you can make clapton! :)"

Has anyone ever MTL on 0.05ohm coil? I mean would it work? I am using Subtank plus on second bigger hole. Thank you!

Hello guys I'm currently rocking the TF-Q4 coil, for my TFV4 and i've been liking it alot expect for a little leaking. But i've been looking into perhaps getting the TF-T4 Quad Clapton coil 0.20ohm or 0.46ohm, but i wanted to get you're thoughts on it first :) Is it any better ? Can't really...

What coil will get me the most clouds (0.150) 15-50w) (0.50) 18-70w) (1.50) 10w-26w)

I have a Kanger Subox mini. The mod itself is great. However, the coils from Kangertech have sucked. For me at least. Almost immediately I get bad flavored hits. I always prime new coils. I make sure it's screwed in tight. However, every third hit is a burnt hit. Even when its a fresh...

Well, sort of. One of my favorite coils is a parallel 24/28g round kanthal with a 2.4 or 2.5mm ID, usually 8 or 9 wraps with the 24g and one less with the 28. Depending on the wraps I've done it as a single and a dual both. Last night, I tried doing essentially the same thing with 22g and 28g...

Does anyone know where I can find the (pink) kangertech ssocc SS316L coils that are made with SS wiring? I am trying to use the SS316 Temperature Control setting on my Evic VTC and cannot find these coils anywhere. I do not like the Nickel ones and all the other ones are either nichrome or clapton.

I'm sorry if this question sounds naive as I am relatively new to vaping. I currently using a Nautilus Mini Clearomizer tank and use prepackaged Aspire Triton Mini Clapton Coils (1.8 ohms) in this tank. I just wanted to ask if it is necessary to clean a prepackaged coil before installing it and...

Okay so I bought a Uwell crown 2 weeks ago, I love the tank but I must be doing something wrong because my coils only last about 3 days with me barely even using it. I prime the coil, make sure it's soaked through and fill the tank, still just leave it for about half an hour, I start on about...

Hi there I just bought an Aspire Odyssey Mini - "Aspire Triton Mini Tank, Pegasus Mini, 2500mAh 20/40A Battery, Coils 0.15 (NI200) 1.2 (Kanthal) 1.8 (Clapton)" Can you tell me which liquids to use for this? I don't know which VG/PG ratio I should go for or even what mg. It would really be...

My coil keeps coming loose causing my juice to leak. It'll work for a long time and I'll put it away fullish then I'll bring it out one day and it'll be empty and the coil is loose. Are there any ways I can solve that problem?

Hello Peeps, I have been vaping for over a year now and wanted to provide my feedback on "What Coil to buy for my Kangertech Subtank". I vape about 30 ML a day - hopefully this gives you an idea of how much vaping I do and how much stress each coil was put under. In this review i will be...

with your mouth wide open after just filling an RDA. It will result in flying boiling hot liquid onto your tongue leaving you regretting the decision for a good couple days. I seem to never learn my lesson and always seem to get too much juice on the coils by accident.

I'm searching for a very specific coil. The kangertech OCC 1.2 ohm horizontal coil. I prefer the ones with the white grommets. Id like to buy some genuine ones. If anyone knows where to buy authentic coils, please let me know. I usually buy from sweet-vapes, and I am never disappointed...

I have and a Rig v2 and Roughneck v2 and looking for something to give me a lot of cloud production. What is the best build for this setup?

I recently purchased a cherry bomber box mod (I know it can be dangerous) and i have a RDA that i can fit 3 coils on also I have 2 VCT 5 batterys in the cherry bomber giving me 60 amps. how many ohms do you recommend for a cherry bomber?. as at the moment its really burning my throat and im...

If we have a regulated box mod, can we experiment with coil building any way we want? My mod: Ipv d2 stainless steel. Rda: Mutation Xs v4 mini. Rta: Goblin mini.

I posted this somewhere else but thought this would be helpful for some people. It is a .23 ohm build (which is the perfect sweet spot for my Snowwolf 200W). Basically a dual vertical coil, 24g clapton coil with .8 x .1 ribbon wire, 6 wraps around 2.5mm drillbit and it works magic. At 130w...

I KNOW this has been posted before and I even Google searched other forums and found my answer (somewhat.) This question is about coil storage I want to know if what I'm doing is considered wrong. So I only have 6 juices or so (I just bought 2 more tonight.) What I've been doing when I want...

I just got my TFV4 mini kit, and right now im using the CLP2 coil that came in the tank. I really want to get the RBA base working though. It has a spaced Clapton coil in it and I was hoping someone could enlighten me if it was better for flavor than a contact Clapton. I have Clapton wire but...

We were invited to try out the Vaporesso Target VTC Kit with Ceramic cCELL coil at AltSmoke a vapor shop near us in Hoboken. So we got down and dirty iPhone style to let ya know what we think of the ceramic coil's flavor profile. WOW... Pretty amazing. Here is a link to the MOD...

So I just got the Xcube 2 and Smok TFV4. Love it for the most part, but I'm having a burnt coil issue at high wattage. I'm using the quad coil right now, which is supposed to go up to 120W, but I have friends that say they take it up to 200 with no problem. So I'm wondering why I start to get a...

Hello guys, I got a subox mini v2 with the rba etc... I want to make my own coil to sub-ohm I don't know what kind of wire should i use, when i use the coil calculator for a Kanthal A1, to get a 0.5 it says 2/3 wraps and some mm long cable which looks pretty weird to me and unfeasible. can you...

I recently got into vaping and my friend bought me a battery and a tank. But when I received the tank the coil wasn't working properly (Problem with cotton) so now I'm stuck looking for a new coil. He bought me another coil but it didn't fit so I'm worried about buying a new one.

Hey everyone, been vaping and building coils on a sigelei 100 for about a year now, just bought my first temp control mod, the fuchai. I did some research on ti wire, seeing as I can't use nickel due to an allergy. And I picked up some 26, 24, and 22 gauge. I threw a 26 Guage dual coil about...

Coilerz.com was launched a few days ago. The site is simple, either upload a build or search for a build, wire, or resistance. The features listed below are currently being developed and scheduled to be released within the next few months. If you have any suggestions for features that you would...

Hello. I'm just getting into doing my own coils and what not. Im a noobie so please bare with me. I have a general understanding of how they work. Thicker wire takes longer to heat then the thinner wire. The higher the gauge the thinner it is etc. But i have a Kanger Kbox Mini with the subtank...

I use 80/20 juice VG. I was told that as it gets cold weather the juice will get thick, and not work with my Nautilus BVC coils. Is this true? I use 1.8ohm Aspire BVC coils. They told me they was shocked that I will pulling it through the nautilus coils now?

So Here's what happens when you have Kanthal and way too much time on your hands!

I work at a shop, and i have to do tons of build. After months now of ripping up my hand and wasted wire from mess ups. I finally designed and 3D printed a Clatpon Jig Rig that will make endless clapton wire for you :) Video: Site for more info on Clapton Jig Rig: www.Vaped3D.com Let me know...

Mervape is not just an e-juice company, it is a family. We create liquids to generate the most amazing vaping experience. We only use the best ingredients. Coming out of Brooklyn, New York, we keep things very real and very clean. Try our flavored juices and be inducted to the Mervape family...

Good Morning, I am about 3 weeks into vaping. I have a Eleaf 60watt temperature control vape, with crown tank. I use a stainless steel .25 ohm coil. I use the vape at 45 watts. I accidentally burnt my coil dry (used until appsolutely no eliquid), noticed this when it went from the sweet fruity...

What's up guys. I'm just getting into the whole coil building thing and I would greatly appreciate some insight as to what different types of coils they're are and what the size of it means and things of that sort so forgive me if my terminology is inaccurate. I am one of those rookies that...

Hi! If you're reading this, thanks already! I have this aspire CF G Power Battery along with the K1 Glassomizer. I am currently using 1.6 ohm coils, what I wanna know is if I can go lower? Can I rebuild a coil which is say 1.0 ohm? Will it work with the G Power? What's the lowest I could go...

Hello vapers! My better half got me a VT200 and TFV4 for. My birthday last week and yesterday I decided to tackle a problem that no one else seems to have. Rebuilding the TFS6 coil head (the easy way). I used to re-build the OCC coils for my subtank all the time as i prefer the airflow of them...

Okay so with the normal coils it came with it was cool/ warm at about 45wats and had some good vapor production (that's what im going for I like the tricks and stuff) I put together the mini coil with the build it had on the instructions and even at 20 watts its insanely hot with meh vapor but...

Sorry if is the wrong place for this question but I have a nebox by kanger tech and it comes with a buildable coil and has instructions on how to build the coil. Well I want to make my own coil build so my question is. Is it safe to make my own coil build? Just play with it or will it mess up my...

I've been vaping for about 9 months now. I have some experience but there are a lot of things that I don't understand. About a month ago I upgraded to the iPV D2 mod and the Uwell Crown sub tank. I've been VERY happy with the performance of the set up and I haven't had any problems.. until now...

Hey guys vepresso just came out with a ceramic coil that's basically amazing in every way honestly. My question is someone told me ceramic can kill you which is not good haha xD Anyways has anyone taken the shot of using this coil yet? Is it good? Pros Cons Ect

Hi there, i have bought couple weeks ago in Las Vegas X cube 2 and TFV4 mini. The first week i was vaping Clapton dual and sextuple coil with 80-90wats and it was amazing . Big smoke and flavour at its best. But after a week of using the taste was like getting burnt toxic. So i changed it to RBA...

I picked up 2 packs of e-leaf atomizers early this week, and here's my thoughts: They take a second to heat before you hit- that put me off for a little while but I got used to it. They seemed to take longer to saturate. My next coil I may soak it before I install it. They cost almost half...

Hey everyone! I am not a cloud chaser, however I am an avid vaper. I figured I would share this with you guys! I work for a company, DS Vape Accessories, and we build tools to help build coils. Check out our business page on Facebook and let us know what you think or if your interested in...

Ok so here's the background. I went to my shop (Top Notch Vapor) and they were selling grab bags for $25 and in them was a random bottle of Vaporgate or Vaporstorm juice and an atomizer. I bought one and when I got home I opened it up and found I got the Vaporstorm Exile juice and an atomizer...

I'm just wondering if 50watts will be enough to get good flavour from a smok tfv4 with the single or dual coil rba? It comes with a 0.8 coil already on it but I don't mind building another. Most of the reviews are just people using the pre build coils at 80watts etc. I really like the tank but...

I just got an ipv 4s and I have a mutation x I was trying to figure out what build would produce the thickest clouds. Any suggestions?

I've been really interested in building a twisted coil but I'm not 100% sure what it does. Does wrapping two strands of kanthal make it a bigger gauge? What if I use three or four strands to wrap one? I'm just confused.